2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 09:43:59 +08:00
linux-next/Documentation/misc-devices/pci-endpoint-test.rst
Mauro Carvalho Chehab 7910b136cb docs: pci: endpoint/function/binding/pci-test.txt convert to ReST
Convert this file to ReST by adding a proper title to it and
use the right markups for a table.

While here, add a SPDX header.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6254963b85417e44865dab05e4b99cd485074132.1592203650.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-06-19 14:09:28 -06:00

57 lines
1.8 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0
=====================================
Driver for PCI Endpoint Test Function
=====================================
This driver should be used as a host side driver if the root complex is
connected to a configurable PCI endpoint running ``pci_epf_test`` function
driver configured according to [1]_.
The "pci_endpoint_test" driver can be used to perform the following tests.
The PCI driver for the test device performs the following tests:
#) verifying addresses programmed in BAR
#) raise legacy IRQ
#) raise MSI IRQ
#) raise MSI-X IRQ
#) read data
#) write data
#) copy data
This misc driver creates /dev/pci-endpoint-test.<num> for every
``pci_epf_test`` function connected to the root complex and "ioctls"
should be used to perform the above tests.
ioctl
-----
PCITEST_BAR:
Tests the BAR. The number of the BAR to be tested
should be passed as argument.
PCITEST_LEGACY_IRQ:
Tests legacy IRQ
PCITEST_MSI:
Tests message signalled interrupts. The MSI number
to be tested should be passed as argument.
PCITEST_MSIX:
Tests message signalled interrupts. The MSI-X number
to be tested should be passed as argument.
PCITEST_SET_IRQTYPE:
Changes driver IRQ type configuration. The IRQ type
should be passed as argument (0: Legacy, 1:MSI, 2:MSI-X).
PCITEST_GET_IRQTYPE:
Gets driver IRQ type configuration.
PCITEST_WRITE:
Perform write tests. The size of the buffer should be passed
as argument.
PCITEST_READ:
Perform read tests. The size of the buffer should be passed
as argument.
PCITEST_COPY:
Perform read tests. The size of the buffer should be passed
as argument.
.. [1] Documentation/PCI/endpoint/function/binding/pci-test.rst