2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
linux-next/drivers/pcmcia/pxa2xx_base.c
Pavel Machek 5b703683b6 pcmcia vs. MECR on pxa25x/sa1111
After 2.6.34 changes, __pxa2xx_drv_pcmcia_probe() was replaced by
sa1111_pcmcia_add(). That unfortunately means that configure_sockets()
is not called, leading to MECR not being set properly, leading to
strange crashes.

Tested on pxa255+sa1111, I do not have lubbock board nearby. Perhaps
cleaner solution exists?

Signed-off-by: Pavel Machek <pma@sysgo.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-02-19 12:22:35 +01:00

402 lines
11 KiB
C

/*======================================================================
Device driver for the PCMCIA control functionality of PXA2xx
microprocessors.
The contents of this file may be used under the
terms of the GNU Public License version 2 (the "GPL")
(c) Ian Molton (spyro@f2s.com) 2003
(c) Stefan Eletzhofer (stefan.eletzhofer@inquant.de) 2003,4
derived from sa11xx_base.c
Portions created by John G. Dorsey are
Copyright (C) 1999 John G. Dorsey.
======================================================================*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/smemc.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <mach/pxa2xx-regs.h>
#include <asm/mach-types.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
#include "soc_common.h"
#include "pxa2xx_base.h"
/*
* Personal Computer Memory Card International Association (PCMCIA) sockets
*/
#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
(0x20000000 + (Nb) * PCMCIASp)
#define _PCMCIAIO(Nb) _PCMCIA(Nb) /* PCMCIA I/O [0..1] */
#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
(_PCMCIA(Nb) + 2 * PCMCIAPrtSp)
#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
(_PCMCIA(Nb) + 3 * PCMCIAPrtSp)
#define _PCMCIA0 _PCMCIA(0) /* PCMCIA 0 */
#define _PCMCIA0IO _PCMCIAIO(0) /* PCMCIA 0 I/O */
#define _PCMCIA0Attr _PCMCIAAttr(0) /* PCMCIA 0 Attribute */
#define _PCMCIA0Mem _PCMCIAMem(0) /* PCMCIA 0 Memory */
#define _PCMCIA1 _PCMCIA(1) /* PCMCIA 1 */
#define _PCMCIA1IO _PCMCIAIO(1) /* PCMCIA 1 I/O */
#define _PCMCIA1Attr _PCMCIAAttr(1) /* PCMCIA 1 Attribute */
#define _PCMCIA1Mem _PCMCIAMem(1) /* PCMCIA 1 Memory */
#define MCXX_SETUP_MASK (0x7f)
#define MCXX_ASST_MASK (0x1f)
#define MCXX_HOLD_MASK (0x3f)
#define MCXX_SETUP_SHIFT (0)
#define MCXX_ASST_SHIFT (7)
#define MCXX_HOLD_SHIFT (14)
static inline u_int pxa2xx_mcxx_hold(u_int pcmcia_cycle_ns,
u_int mem_clk_10khz)
{
u_int code = pcmcia_cycle_ns * mem_clk_10khz;
return (code / 300000) + ((code % 300000) ? 1 : 0) - 1;
}
static inline u_int pxa2xx_mcxx_asst(u_int pcmcia_cycle_ns,
u_int mem_clk_10khz)
{
u_int code = pcmcia_cycle_ns * mem_clk_10khz;
return (code / 300000) + ((code % 300000) ? 1 : 0) + 1;
}
static inline u_int pxa2xx_mcxx_setup(u_int pcmcia_cycle_ns,
u_int mem_clk_10khz)
{
u_int code = pcmcia_cycle_ns * mem_clk_10khz;
return (code / 100000) + ((code % 100000) ? 1 : 0) - 1;
}
/* This function returns the (approximate) command assertion period, in
* nanoseconds, for a given CPU clock frequency and MCXX_ASST value:
*/
static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz,
u_int pcmcia_mcxx_asst)
{
return (300000 * (pcmcia_mcxx_asst + 1) / mem_clk_10khz);
}
static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
{
uint32_t val;
val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
__raw_writel(val, MCMEM(sock));
return 0;
}
static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
{
uint32_t val;
val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
__raw_writel(val, MCIO(sock));
return 0;
}
static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
{
uint32_t val;
val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
__raw_writel(val, MCATT(sock));
return 0;
}
static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int clk)
{
struct soc_pcmcia_timing timing;
int sock = skt->nr;
soc_common_pcmcia_get_timing(skt, &timing);
pxa2xx_pcmcia_set_mcmem(sock, timing.mem, clk);
pxa2xx_pcmcia_set_mcatt(sock, timing.attr, clk);
pxa2xx_pcmcia_set_mcio(sock, timing.io, clk);
return 0;
}
static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
{
unsigned long clk = clk_get_rate(skt->clk);
return pxa2xx_pcmcia_set_mcxx(skt, clk / 10000);
}
#ifdef CONFIG_CPU_FREQ
static int
pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
unsigned long val,
struct cpufreq_freqs *freqs)
{
switch (val) {
case CPUFREQ_PRECHANGE:
if (freqs->new > freqs->old) {
debug(skt, 2, "new frequency %u.%uMHz > %u.%uMHz, "
"pre-updating\n",
freqs->new / 1000, (freqs->new / 100) % 10,
freqs->old / 1000, (freqs->old / 100) % 10);
pxa2xx_pcmcia_set_timing(skt);
}
break;
case CPUFREQ_POSTCHANGE:
if (freqs->new < freqs->old) {
debug(skt, 2, "new frequency %u.%uMHz < %u.%uMHz, "
"post-updating\n",
freqs->new / 1000, (freqs->new / 100) % 10,
freqs->old / 1000, (freqs->old / 100) % 10);
pxa2xx_pcmcia_set_timing(skt);
}
break;
}
return 0;
}
#endif
void pxa2xx_configure_sockets(struct device *dev)
{
struct pcmcia_low_level *ops = dev->platform_data;
/*
* We have at least one socket, so set MECR:CIT
* (Card Is There)
*/
uint32_t mecr = MECR_CIT;
/* Set MECR:NOS (Number Of Sockets) */
if ((ops->first + ops->nr) > 1 ||
machine_is_viper() || machine_is_arcom_zeus())
mecr |= MECR_NOS;
__raw_writel(mecr, MECR);
}
static const char *skt_names[] = {
"PCMCIA socket 0",
"PCMCIA socket 1",
};
#define SKT_DEV_INFO_SIZE(n) \
(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
{
skt->res_skt.start = _PCMCIA(skt->nr);
skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
skt->res_skt.name = skt_names[skt->nr];
skt->res_skt.flags = IORESOURCE_MEM;
skt->res_io.start = _PCMCIAIO(skt->nr);
skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
skt->res_io.name = "io";
skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
skt->res_mem.start = _PCMCIAMem(skt->nr);
skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
skt->res_mem.name = "memory";
skt->res_mem.flags = IORESOURCE_MEM;
skt->res_attr.start = _PCMCIAAttr(skt->nr);
skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
skt->res_attr.name = "attribute";
skt->res_attr.flags = IORESOURCE_MEM;
return soc_pcmcia_add_one(skt);
}
EXPORT_SYMBOL(pxa2xx_drv_pcmcia_add_one);
void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
{
/* Provide our PXA2xx specific timing routines. */
ops->set_timing = pxa2xx_pcmcia_set_timing;
#ifdef CONFIG_CPU_FREQ
ops->frequency_change = pxa2xx_pcmcia_frequency_change;
#endif
}
EXPORT_SYMBOL(pxa2xx_drv_pcmcia_ops);
static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
{
int i, ret = 0;
struct pcmcia_low_level *ops;
struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
struct clk *clk;
ops = (struct pcmcia_low_level *)dev->dev.platform_data;
if (!ops) {
ret = -ENODEV;
goto err0;
}
if (cpu_is_pxa320() && ops->nr > 1) {
dev_err(&dev->dev, "pxa320 supports only one pcmcia slot");
ret = -EINVAL;
goto err0;
}
clk = clk_get(&dev->dev, NULL);
if (!clk)
return -ENODEV;
pxa2xx_drv_pcmcia_ops(ops);
sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
if (!sinfo) {
clk_put(clk);
return -ENOMEM;
}
sinfo->nskt = ops->nr;
sinfo->clk = clk;
/* Initialize processor specific parameters */
for (i = 0; i < ops->nr; i++) {
skt = &sinfo->skt[i];
skt->nr = ops->first + i;
skt->clk = clk;
skt->ops = ops;
skt->socket.owner = ops->owner;
skt->socket.dev.parent = &dev->dev;
skt->socket.pci_irq = NO_IRQ;
ret = pxa2xx_drv_pcmcia_add_one(skt);
if (ret)
goto err1;
}
if (ret) {
while (--i >= 0)
soc_pcmcia_remove_one(&sinfo->skt[i]);
kfree(sinfo);
clk_put(clk);
} else {
pxa2xx_configure_sockets(&dev->dev);
dev_set_drvdata(&dev->dev, sinfo);
}
return 0;
err1:
while (--i >= 0)
soc_pcmcia_remove_one(&sinfo->skt[i]);
kfree(sinfo);
err0:
return ret;
}
static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
{
struct skt_dev_info *sinfo = platform_get_drvdata(dev);
int i;
platform_set_drvdata(dev, NULL);
for (i = 0; i < sinfo->nskt; i++)
soc_pcmcia_remove_one(&sinfo->skt[i]);
clk_put(sinfo->clk);
kfree(sinfo);
return 0;
}
static int pxa2xx_drv_pcmcia_resume(struct device *dev)
{
pxa2xx_configure_sockets(dev);
return 0;
}
static const struct dev_pm_ops pxa2xx_drv_pcmcia_pm_ops = {
.resume = pxa2xx_drv_pcmcia_resume,
};
static struct platform_driver pxa2xx_pcmcia_driver = {
.probe = pxa2xx_drv_pcmcia_probe,
.remove = pxa2xx_drv_pcmcia_remove,
.driver = {
.name = "pxa2xx-pcmcia",
.owner = THIS_MODULE,
.pm = &pxa2xx_drv_pcmcia_pm_ops,
},
};
static int __init pxa2xx_pcmcia_init(void)
{
return platform_driver_register(&pxa2xx_pcmcia_driver);
}
static void __exit pxa2xx_pcmcia_exit(void)
{
platform_driver_unregister(&pxa2xx_pcmcia_driver);
}
fs_initcall(pxa2xx_pcmcia_init);
module_exit(pxa2xx_pcmcia_exit);
MODULE_AUTHOR("Stefan Eletzhofer <stefan.eletzhofer@inquant.de> and Ian Molton <spyro@f2s.com>");
MODULE_DESCRIPTION("Linux PCMCIA Card Services: PXA2xx core socket driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pxa2xx-pcmcia");