2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
linux-next/drivers/gpu/drm/gma500/cdv_device.c
Thomas Gleixner a61127c213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin st fifth floor boston ma 02110
  1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 111 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:06 +02:00

619 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/**************************************************************************
* Copyright (c) 2011, Intel Corporation.
* All Rights Reserved.
*
**************************************************************************/
#include <linux/backlight.h>
#include <drm/drmP.h>
#include <drm/drm.h>
#include <drm/gma_drm.h>
#include "psb_drv.h"
#include "psb_reg.h"
#include "psb_intel_reg.h"
#include "intel_bios.h"
#include "cdv_device.h"
#include "gma_device.h"
#define VGA_SR_INDEX 0x3c4
#define VGA_SR_DATA 0x3c5
static void cdv_disable_vga(struct drm_device *dev)
{
u8 sr1;
u32 vga_reg;
vga_reg = VGACNTRL;
outb(1, VGA_SR_INDEX);
sr1 = inb(VGA_SR_DATA);
outb(sr1 | 1<<5, VGA_SR_DATA);
udelay(300);
REG_WRITE(vga_reg, VGA_DISP_DISABLE);
REG_READ(vga_reg);
}
static int cdv_output_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
drm_mode_create_scaling_mode_property(dev);
cdv_disable_vga(dev);
cdv_intel_crt_init(dev, &dev_priv->mode_dev);
cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
/* These bits indicate HDMI not SDVO on CDV */
if (REG_READ(SDVOB) & SDVO_DETECTED) {
cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
if (REG_READ(DP_B) & DP_DETECTED)
cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_B);
}
if (REG_READ(SDVOC) & SDVO_DETECTED) {
cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
if (REG_READ(DP_C) & DP_DETECTED)
cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_C);
}
return 0;
}
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
/*
* Cedartrail Backlght Interfaces
*/
static struct backlight_device *cdv_backlight_device;
static int cdv_backlight_combination_mode(struct drm_device *dev)
{
return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE;
}
static u32 cdv_get_max_backlight(struct drm_device *dev)
{
u32 max = REG_READ(BLC_PWM_CTL);
if (max == 0) {
DRM_DEBUG_KMS("LVDS Panel PWM value is 0!\n");
/* i915 does this, I believe which means that we should not
* smash PWM control as firmware will take control of it. */
return 1;
}
max >>= 16;
if (cdv_backlight_combination_mode(dev))
max *= 0xff;
return max;
}
static int cdv_get_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
if (cdv_backlight_combination_mode(dev)) {
u8 lbpc;
val &= ~1;
pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
val *= lbpc;
}
return (val * 100)/cdv_get_max_backlight(dev);
}
static int cdv_set_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
int level = bd->props.brightness;
u32 blc_pwm_ctl;
/* Percentage 1-100% being valid */
if (level < 1)
level = 1;
level *= cdv_get_max_backlight(dev);
level /= 100;
if (cdv_backlight_combination_mode(dev)) {
u32 max = cdv_get_max_backlight(dev);
u8 lbpc;
lbpc = level * 0xfe / max + 1;
level /= lbpc;
pci_write_config_byte(dev->pdev, 0xF4, lbpc);
}
blc_pwm_ctl = REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
REG_WRITE(BLC_PWM_CTL, (blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
return 0;
}
static const struct backlight_ops cdv_ops = {
.get_brightness = cdv_get_brightness,
.update_status = cdv_set_brightness,
};
static int cdv_backlight_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 100;
props.type = BACKLIGHT_PLATFORM;
cdv_backlight_device = backlight_device_register("psb-bl",
NULL, (void *)dev, &cdv_ops, &props);
if (IS_ERR(cdv_backlight_device))
return PTR_ERR(cdv_backlight_device);
cdv_backlight_device->props.brightness =
cdv_get_brightness(cdv_backlight_device);
backlight_update_status(cdv_backlight_device);
dev_priv->backlight_device = cdv_backlight_device;
dev_priv->backlight_enabled = true;
return 0;
}
#endif
/*
* Provide the Cedarview specific chip logic and low level methods
* for power management
*
* FIXME: we need to implement the apm/ospm base management bits
* for this and the MID devices.
*/
static inline u32 CDV_MSG_READ32(int domain, uint port, uint offset)
{
int mcr = (0x10<<24) | (port << 16) | (offset << 8);
uint32_t ret_val = 0;
struct pci_dev *pci_root = pci_get_domain_bus_and_slot(domain, 0, 0);
pci_write_config_dword(pci_root, 0xD0, mcr);
pci_read_config_dword(pci_root, 0xD4, &ret_val);
pci_dev_put(pci_root);
return ret_val;
}
static inline void CDV_MSG_WRITE32(int domain, uint port, uint offset,
u32 value)
{
int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
struct pci_dev *pci_root = pci_get_domain_bus_and_slot(domain, 0, 0);
pci_write_config_dword(pci_root, 0xD4, value);
pci_write_config_dword(pci_root, 0xD0, mcr);
pci_dev_put(pci_root);
}
#define PSB_PM_SSC 0x20
#define PSB_PM_SSS 0x30
#define PSB_PWRGT_GFX_ON 0x02
#define PSB_PWRGT_GFX_OFF 0x01
#define PSB_PWRGT_GFX_D0 0x00
#define PSB_PWRGT_GFX_D3 0x03
static void cdv_init_pm(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 pwr_cnt;
int domain = pci_domain_nr(dev->pdev->bus);
int i;
dev_priv->apm_base = CDV_MSG_READ32(domain, PSB_PUNIT_PORT,
PSB_APMBA) & 0xFFFF;
dev_priv->ospm_base = CDV_MSG_READ32(domain, PSB_PUNIT_PORT,
PSB_OSPMBA) & 0xFFFF;
/* Power status */
pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
/* Enable the GPU */
pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
pwr_cnt |= PSB_PWRGT_GFX_ON;
outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
/* Wait for the GPU power */
for (i = 0; i < 5; i++) {
u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
return;
udelay(10);
}
dev_err(dev->dev, "GPU: power management timed out.\n");
}
static void cdv_errata(struct drm_device *dev)
{
/* Disable bonus launch.
* CPU and GPU competes for memory and display misses updates and
* flickers. Worst with dual core, dual displays.
*
* Fixes were done to Win 7 gfx driver to disable a feature called
* Bonus Launch to work around the issue, by degrading
* performance.
*/
CDV_MSG_WRITE32(pci_domain_nr(dev->pdev->bus), 3, 0x30, 0x08027108);
}
/**
* cdv_save_display_registers - save registers lost on suspend
* @dev: our DRM device
*
* Save the state we need in order to be able to restore the interface
* upon resume from suspend
*/
static int cdv_save_display_registers(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_save_area *regs = &dev_priv->regs;
struct drm_connector *connector;
dev_dbg(dev->dev, "Saving GPU registers.\n");
pci_read_config_byte(dev->pdev, 0xF4, &regs->cdv.saveLBB);
regs->cdv.saveDSPCLK_GATE_D = REG_READ(DSPCLK_GATE_D);
regs->cdv.saveRAMCLK_GATE_D = REG_READ(RAMCLK_GATE_D);
regs->cdv.saveDSPARB = REG_READ(DSPARB);
regs->cdv.saveDSPFW[0] = REG_READ(DSPFW1);
regs->cdv.saveDSPFW[1] = REG_READ(DSPFW2);
regs->cdv.saveDSPFW[2] = REG_READ(DSPFW3);
regs->cdv.saveDSPFW[3] = REG_READ(DSPFW4);
regs->cdv.saveDSPFW[4] = REG_READ(DSPFW5);
regs->cdv.saveDSPFW[5] = REG_READ(DSPFW6);
regs->cdv.saveADPA = REG_READ(ADPA);
regs->cdv.savePP_CONTROL = REG_READ(PP_CONTROL);
regs->cdv.savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS);
regs->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
regs->saveBLC_PWM_CTL2 = REG_READ(BLC_PWM_CTL2);
regs->cdv.saveLVDS = REG_READ(LVDS);
regs->cdv.savePFIT_CONTROL = REG_READ(PFIT_CONTROL);
regs->cdv.savePP_ON_DELAYS = REG_READ(PP_ON_DELAYS);
regs->cdv.savePP_OFF_DELAYS = REG_READ(PP_OFF_DELAYS);
regs->cdv.savePP_CYCLE = REG_READ(PP_CYCLE);
regs->cdv.saveVGACNTRL = REG_READ(VGACNTRL);
regs->cdv.saveIER = REG_READ(PSB_INT_ENABLE_R);
regs->cdv.saveIMR = REG_READ(PSB_INT_MASK_R);
list_for_each_entry(connector, &dev->mode_config.connector_list, head)
connector->funcs->dpms(connector, DRM_MODE_DPMS_OFF);
return 0;
}
/**
* cdv_restore_display_registers - restore lost register state
* @dev: our DRM device
*
* Restore register state that was lost during suspend and resume.
*
* FIXME: review
*/
static int cdv_restore_display_registers(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_save_area *regs = &dev_priv->regs;
struct drm_connector *connector;
u32 temp;
pci_write_config_byte(dev->pdev, 0xF4, regs->cdv.saveLBB);
REG_WRITE(DSPCLK_GATE_D, regs->cdv.saveDSPCLK_GATE_D);
REG_WRITE(RAMCLK_GATE_D, regs->cdv.saveRAMCLK_GATE_D);
/* BIOS does below anyway */
REG_WRITE(DPIO_CFG, 0);
REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N);
temp = REG_READ(DPLL_A);
if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) {
REG_WRITE(DPLL_A, temp | DPLL_SYNCLOCK_ENABLE);
REG_READ(DPLL_A);
}
temp = REG_READ(DPLL_B);
if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) {
REG_WRITE(DPLL_B, temp | DPLL_SYNCLOCK_ENABLE);
REG_READ(DPLL_B);
}
udelay(500);
REG_WRITE(DSPFW1, regs->cdv.saveDSPFW[0]);
REG_WRITE(DSPFW2, regs->cdv.saveDSPFW[1]);
REG_WRITE(DSPFW3, regs->cdv.saveDSPFW[2]);
REG_WRITE(DSPFW4, regs->cdv.saveDSPFW[3]);
REG_WRITE(DSPFW5, regs->cdv.saveDSPFW[4]);
REG_WRITE(DSPFW6, regs->cdv.saveDSPFW[5]);
REG_WRITE(DSPARB, regs->cdv.saveDSPARB);
REG_WRITE(ADPA, regs->cdv.saveADPA);
REG_WRITE(BLC_PWM_CTL2, regs->saveBLC_PWM_CTL2);
REG_WRITE(LVDS, regs->cdv.saveLVDS);
REG_WRITE(PFIT_CONTROL, regs->cdv.savePFIT_CONTROL);
REG_WRITE(PFIT_PGM_RATIOS, regs->cdv.savePFIT_PGM_RATIOS);
REG_WRITE(BLC_PWM_CTL, regs->saveBLC_PWM_CTL);
REG_WRITE(PP_ON_DELAYS, regs->cdv.savePP_ON_DELAYS);
REG_WRITE(PP_OFF_DELAYS, regs->cdv.savePP_OFF_DELAYS);
REG_WRITE(PP_CYCLE, regs->cdv.savePP_CYCLE);
REG_WRITE(PP_CONTROL, regs->cdv.savePP_CONTROL);
REG_WRITE(VGACNTRL, regs->cdv.saveVGACNTRL);
REG_WRITE(PSB_INT_ENABLE_R, regs->cdv.saveIER);
REG_WRITE(PSB_INT_MASK_R, regs->cdv.saveIMR);
/* Fix arbitration bug */
cdv_errata(dev);
drm_mode_config_reset(dev);
list_for_each_entry(connector, &dev->mode_config.connector_list, head)
connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
/* Resume the modeset for every activated CRTC */
drm_helper_resume_force_mode(dev);
return 0;
}
static int cdv_power_down(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 pwr_cnt, pwr_mask, pwr_sts;
int tries = 5;
pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
pwr_cnt |= PSB_PWRGT_GFX_OFF;
pwr_mask = PSB_PWRGT_GFX_MASK;
outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
while (tries--) {
pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D3)
return 0;
udelay(10);
}
return 0;
}
static int cdv_power_up(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 pwr_cnt, pwr_mask, pwr_sts;
int tries = 5;
pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
pwr_cnt |= PSB_PWRGT_GFX_ON;
pwr_mask = PSB_PWRGT_GFX_MASK;
outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
while (tries--) {
pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D0)
return 0;
udelay(10);
}
return 0;
}
static void cdv_hotplug_work_func(struct work_struct *work)
{
struct drm_psb_private *dev_priv = container_of(work, struct drm_psb_private,
hotplug_work);
struct drm_device *dev = dev_priv->dev;
/* Just fire off a uevent and let userspace tell us what to do */
drm_helper_hpd_irq_event(dev);
}
/* The core driver has received a hotplug IRQ. We are in IRQ context
so extract the needed information and kick off queued processing */
static int cdv_hotplug_event(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
schedule_work(&dev_priv->hotplug_work);
REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
return 1;
}
static void cdv_hotplug_enable(struct drm_device *dev, bool on)
{
if (on) {
u32 hotplug = REG_READ(PORT_HOTPLUG_EN);
hotplug |= HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN |
HDMID_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN;
REG_WRITE(PORT_HOTPLUG_EN, hotplug);
} else {
REG_WRITE(PORT_HOTPLUG_EN, 0);
REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
}
}
static const char *force_audio_names[] = {
"off",
"auto",
"on",
};
void cdv_intel_attach_force_audio_property(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_property *prop;
int i;
prop = dev_priv->force_audio_property;
if (prop == NULL) {
prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
"audio",
ARRAY_SIZE(force_audio_names));
if (prop == NULL)
return;
for (i = 0; i < ARRAY_SIZE(force_audio_names); i++)
drm_property_add_enum(prop, i-1, force_audio_names[i]);
dev_priv->force_audio_property = prop;
}
drm_object_attach_property(&connector->base, prop, 0);
}
static const char *broadcast_rgb_names[] = {
"Full",
"Limited 16:235",
};
void cdv_intel_attach_broadcast_rgb_property(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_property *prop;
int i;
prop = dev_priv->broadcast_rgb_property;
if (prop == NULL) {
prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
"Broadcast RGB",
ARRAY_SIZE(broadcast_rgb_names));
if (prop == NULL)
return;
for (i = 0; i < ARRAY_SIZE(broadcast_rgb_names); i++)
drm_property_add_enum(prop, i, broadcast_rgb_names[i]);
dev_priv->broadcast_rgb_property = prop;
}
drm_object_attach_property(&connector->base, prop, 0);
}
/* Cedarview */
static const struct psb_offset cdv_regmap[2] = {
{
.fp0 = FPA0,
.fp1 = FPA1,
.cntr = DSPACNTR,
.conf = PIPEACONF,
.src = PIPEASRC,
.dpll = DPLL_A,
.dpll_md = DPLL_A_MD,
.htotal = HTOTAL_A,
.hblank = HBLANK_A,
.hsync = HSYNC_A,
.vtotal = VTOTAL_A,
.vblank = VBLANK_A,
.vsync = VSYNC_A,
.stride = DSPASTRIDE,
.size = DSPASIZE,
.pos = DSPAPOS,
.base = DSPABASE,
.surf = DSPASURF,
.addr = DSPABASE,
.status = PIPEASTAT,
.linoff = DSPALINOFF,
.tileoff = DSPATILEOFF,
.palette = PALETTE_A,
},
{
.fp0 = FPB0,
.fp1 = FPB1,
.cntr = DSPBCNTR,
.conf = PIPEBCONF,
.src = PIPEBSRC,
.dpll = DPLL_B,
.dpll_md = DPLL_B_MD,
.htotal = HTOTAL_B,
.hblank = HBLANK_B,
.hsync = HSYNC_B,
.vtotal = VTOTAL_B,
.vblank = VBLANK_B,
.vsync = VSYNC_B,
.stride = DSPBSTRIDE,
.size = DSPBSIZE,
.pos = DSPBPOS,
.base = DSPBBASE,
.surf = DSPBSURF,
.addr = DSPBBASE,
.status = PIPEBSTAT,
.linoff = DSPBLINOFF,
.tileoff = DSPBTILEOFF,
.palette = PALETTE_B,
}
};
static int cdv_chip_setup(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
INIT_WORK(&dev_priv->hotplug_work, cdv_hotplug_work_func);
if (pci_enable_msi(dev->pdev))
dev_warn(dev->dev, "Enabling MSI failed!\n");
dev_priv->regmap = cdv_regmap;
gma_get_core_freq(dev);
psb_intel_opregion_init(dev);
psb_intel_init_bios(dev);
cdv_hotplug_enable(dev, false);
return 0;
}
/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
const struct psb_ops cdv_chip_ops = {
.name = "GMA3600/3650",
.accel_2d = 0,
.pipes = 2,
.crtcs = 2,
.hdmi_mask = (1 << 0) | (1 << 1),
.lvds_mask = (1 << 1),
.sdvo_mask = (1 << 0),
.cursor_needs_phys = 0,
.sgx_offset = MRST_SGX_OFFSET,
.chip_setup = cdv_chip_setup,
.errata = cdv_errata,
.crtc_helper = &cdv_intel_helper_funcs,
.crtc_funcs = &cdv_intel_crtc_funcs,
.clock_funcs = &cdv_clock_funcs,
.output_init = cdv_output_init,
.hotplug = cdv_hotplug_event,
.hotplug_enable = cdv_hotplug_enable,
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
.backlight_init = cdv_backlight_init,
#endif
.init_pm = cdv_init_pm,
.save_regs = cdv_save_display_registers,
.restore_regs = cdv_restore_display_registers,
.save_crtc = gma_crtc_save,
.restore_crtc = gma_crtc_restore,
.power_down = cdv_power_down,
.power_up = cdv_power_up,
.update_wm = cdv_update_wm,
.disable_sr = cdv_disable_sr,
};