Alexander Duyck c44f5f516e ixgbe: Always use context 0, even for FCoE and TSO ... We were spending cycles separating the FCoE and TSO contexts even though we always overwriting the context anyway. Instead of doing that we can just use context 0 for all descriptors. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2013-01-19 04:06:14 -08:00
..
ixgbe_82598.c	ixgbe: Update link flow control to correctly handle multiple packet buffer DCB	2012-05-04 03:25:24 -07:00
ixgbe_82599.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_common.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_common.h	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_dcb_82598.c	ixgbe: Clean up priority based flow control	2012-05-09 22:15:40 -07:00
ixgbe_dcb_82598.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_dcb_82599.c	ixgbe: Clean up priority based flow control	2012-05-09 22:15:40 -07:00
ixgbe_dcb_82599.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_dcb_nl.c	ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes	2013-01-19 03:35:15 -08:00
ixgbe_dcb.c	ixgbe: Use num_tcs.pg_tcs as upper limit for TC when checking based on UP	2012-07-21 16:05:28 -07:00
ixgbe_dcb.h	ixgbe: Populate the prio_tc_map in ixgbe_setup_tc	2012-07-14 14:29:19 -07:00
ixgbe_debugfs.c	ixgbe: eliminate Smatch warnings in ixgbe_debugfs.c	2012-12-01 02:29:19 -08:00
ixgbe_ethtool.c	ixgbe: ethtool correctly identify autoneg setting	2012-11-22 01:39:43 -08:00
ixgbe_fcoe.c	ixgbe: Always use context 0, even for FCoE and TSO	2013-01-19 04:06:14 -08:00
ixgbe_fcoe.h	ixgbe: Make FCoE allocation and configuration closer to how rings work	2012-07-19 18:18:49 -07:00
ixgbe_lib.c	ixgbe: fix default setting of TXDCTL.WTHRESH	2012-11-01 02:00:10 -07:00
ixgbe_main.c	ixgbe: Always use context 0, even for FCoE and TSO	2013-01-19 04:06:14 -08:00
ixgbe_mbx.c	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_mbx.h	ixgbe: Add support for GET_QUEUES message to get DCB configuration	2012-10-22 21:14:54 -07:00
ixgbe_phy.c	ixgbe: add support for 1G SX modules	2012-06-20 01:37:04 -07:00
ixgbe_phy.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_ptp.c	ixgbe: remove needless queuing for L4 ptp packets	2012-11-22 01:39:37 -08:00
ixgbe_sriov.c	ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes	2013-01-19 03:35:15 -08:00
ixgbe_sriov.h	ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes	2013-01-19 03:35:15 -08:00
ixgbe_sysfs.c	drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functions	2012-07-10 23:13:46 -07:00
ixgbe_type.h	ixgbe: check whether thermal sensor is enabled.	2012-12-06 21:38:38 -08:00
ixgbe_x540.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe.h	ixgbe: Make the bridge mode setting sticky	2012-11-28 04:46:11 -08:00
Makefile	ptp: Enable clock drivers along with associated net/PHY drivers	2012-11-01 11:35:18 -04:00