2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/arch/powerpc/platforms/44x/warp.c
Sean MacLennan c41f4af8fe [POWERPC] 4xx: Fix offset value on Warp board
While merging, I found a small bug that I forgot to send. I add an
offset to a value twice.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-06 21:02:54 -06:00

154 lines
3.2 KiB
C

/*
* PIKA Warp(tm) board specific routines
*
* Copyright (c) 2008 PIKA Technologies
* Sean MacLennan <smaclennan@pikatech.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/kthread.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
#include "44x.h"
static __initdata struct of_device_id warp_of_bus[] = {
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,opb", },
{ .compatible = "ibm,ebc", },
{},
};
static int __init warp_device_probe(void)
{
of_platform_bus_probe(NULL, warp_of_bus, NULL);
return 0;
}
machine_device_initcall(warp, warp_device_probe);
static int __init warp_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "pika,warp");
}
define_machine(warp) {
.name = "Warp",
.probe = warp_probe,
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
#define LED_GREEN (0x80000000 >> 0)
#define LED_RED (0x80000000 >> 1)
/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
void warp_set_power_leds(int green, int red)
{
static void __iomem *gpio_base = NULL;
unsigned leds;
if (gpio_base == NULL) {
struct device_node *np;
/* Power LEDS are on the second GPIO controller */
np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
if (np)
np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
if (np == NULL) {
printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
return;
}
gpio_base = of_iomap(np, 0);
of_node_put(np);
if (gpio_base == NULL) {
printk(KERN_ERR __FILE__ ": Unable to map gpio");
return;
}
}
leds = in_be32(gpio_base);
switch (green) {
case 0: leds &= ~LED_GREEN; break;
case 1: leds |= LED_GREEN; break;
}
switch (red) {
case 0: leds &= ~LED_RED; break;
case 1: leds |= LED_RED; break;
}
out_be32(gpio_base, leds);
}
EXPORT_SYMBOL(warp_set_power_leds);
#ifdef CONFIG_SENSORS_AD7414
static int pika_dtm_thread(void __iomem *fpga)
{
extern int ad7414_get_temp(int index);
while (!kthread_should_stop()) {
int temp = ad7414_get_temp(0);
out_be32(fpga, temp);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ);
}
return 0;
}
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
struct device_node *np;
struct resource res;
void __iomem *fpga;
np = of_find_compatible_node(NULL, NULL, "pika,fpga");
if (np == NULL)
return -ENOENT;
/* We do not call of_iomap here since it would map in the entire
* fpga space, which is over 8k.
*/
if (of_address_to_resource(np, 0, &res)) {
of_node_put(np);
return -ENOENT;
}
of_node_put(np);
fpga = ioremap(res.start, 0x24);
if (fpga == NULL)
return -ENOENT;
dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
if (IS_ERR(dtm_thread)) {
iounmap(fpga);
return PTR_ERR(dtm_thread);
}
return 0;
}
device_initcall(pika_dtm_start);
#endif