2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/drivers/usb/host/ehci-st.c
Stephen Boyd b33f37064b usb: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30 20:29:18 +02:00

365 lines
8.2 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0
/*
* ST EHCI driver
*
* Copyright (C) 2014 STMicroelectronics All Rights Reserved
*
* Author: Peter Griffin <peter.griffin@linaro.org>
*
* Derived from ehci-platform.c
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/hrtimer.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/pinctrl/consumer.h>
#include "ehci.h"
#define USB_MAX_CLKS 3
struct st_ehci_platform_priv {
struct clk *clks[USB_MAX_CLKS];
struct clk *clk48;
struct reset_control *rst;
struct reset_control *pwr;
struct phy *phy;
};
#define DRIVER_DESC "EHCI STMicroelectronics driver"
#define hcd_to_ehci_priv(h) \
((struct st_ehci_platform_priv *)hcd_to_ehci(h)->priv)
static const char hcd_name[] = "ehci-st";
#define EHCI_CAPS_SIZE 0x10
#define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84)
static int st_ehci_platform_reset(struct usb_hcd *hcd)
{
struct platform_device *pdev = to_platform_device(hcd->self.controller);
struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
u32 threshold;
/* Set EHCI packet buffer IN/OUT threshold to 128 bytes */
threshold = 128 | (128 << 16);
writel(threshold, hcd->regs + AHB2STBUS_INSREG01);
ehci->caps = hcd->regs + pdata->caps_offset;
return ehci_setup(hcd);
}
static int st_ehci_platform_power_on(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
int clk, ret;
ret = reset_control_deassert(priv->pwr);
if (ret)
return ret;
ret = reset_control_deassert(priv->rst);
if (ret)
goto err_assert_power;
/* some SoCs don't have a dedicated 48Mhz clock, but those that do
need the rate to be explicitly set */
if (priv->clk48) {
ret = clk_set_rate(priv->clk48, 48000000);
if (ret)
goto err_assert_reset;
}
for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) {
ret = clk_prepare_enable(priv->clks[clk]);
if (ret)
goto err_disable_clks;
}
ret = phy_init(priv->phy);
if (ret)
goto err_disable_clks;
ret = phy_power_on(priv->phy);
if (ret)
goto err_exit_phy;
return 0;
err_exit_phy:
phy_exit(priv->phy);
err_disable_clks:
while (--clk >= 0)
clk_disable_unprepare(priv->clks[clk]);
err_assert_reset:
reset_control_assert(priv->rst);
err_assert_power:
reset_control_assert(priv->pwr);
return ret;
}
static void st_ehci_platform_power_off(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
int clk;
reset_control_assert(priv->pwr);
reset_control_assert(priv->rst);
phy_power_off(priv->phy);
phy_exit(priv->phy);
for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--)
if (priv->clks[clk])
clk_disable_unprepare(priv->clks[clk]);
}
static struct hc_driver __read_mostly ehci_platform_hc_driver;
static const struct ehci_driver_overrides platform_overrides __initconst = {
.reset = st_ehci_platform_reset,
.extra_priv_size = sizeof(struct st_ehci_platform_priv),
};
static struct usb_ehci_pdata ehci_platform_defaults = {
.power_on = st_ehci_platform_power_on,
.power_suspend = st_ehci_platform_power_off,
.power_off = st_ehci_platform_power_off,
};
static int st_ehci_platform_probe(struct platform_device *dev)
{
struct usb_hcd *hcd;
struct resource *res_mem;
struct usb_ehci_pdata *pdata = &ehci_platform_defaults;
struct st_ehci_platform_priv *priv;
int err, irq, clk = 0;
if (usb_disabled())
return -ENODEV;
irq = platform_get_irq(dev, 0);
if (irq < 0)
return irq;
res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res_mem) {
dev_err(&dev->dev, "no memory resource provided");
return -ENXIO;
}
hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
dev_name(&dev->dev));
if (!hcd)
return -ENOMEM;
platform_set_drvdata(dev, hcd);
dev->dev.platform_data = pdata;
priv = hcd_to_ehci_priv(hcd);
priv->phy = devm_phy_get(&dev->dev, "usb");
if (IS_ERR(priv->phy)) {
err = PTR_ERR(priv->phy);
goto err_put_hcd;
}
for (clk = 0; clk < USB_MAX_CLKS; clk++) {
priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
if (IS_ERR(priv->clks[clk])) {
err = PTR_ERR(priv->clks[clk]);
if (err == -EPROBE_DEFER)
goto err_put_clks;
priv->clks[clk] = NULL;
break;
}
}
/* some SoCs don't have a dedicated 48Mhz clock, but those that
do need the rate to be explicitly set */
priv->clk48 = devm_clk_get(&dev->dev, "clk48");
if (IS_ERR(priv->clk48)) {
dev_info(&dev->dev, "48MHz clk not found\n");
priv->clk48 = NULL;
}
priv->pwr =
devm_reset_control_get_optional_shared(&dev->dev, "power");
if (IS_ERR(priv->pwr)) {
err = PTR_ERR(priv->pwr);
if (err == -EPROBE_DEFER)
goto err_put_clks;
priv->pwr = NULL;
}
priv->rst =
devm_reset_control_get_optional_shared(&dev->dev, "softreset");
if (IS_ERR(priv->rst)) {
err = PTR_ERR(priv->rst);
if (err == -EPROBE_DEFER)
goto err_put_clks;
priv->rst = NULL;
}
if (pdata->power_on) {
err = pdata->power_on(dev);
if (err < 0)
goto err_put_clks;
}
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
goto err_put_clks;
}
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
goto err_put_clks;
device_wakeup_enable(hcd->self.controller);
platform_set_drvdata(dev, hcd);
return err;
err_put_clks:
while (--clk >= 0)
clk_put(priv->clks[clk]);
err_put_hcd:
if (pdata == &ehci_platform_defaults)
dev->dev.platform_data = NULL;
usb_put_hcd(hcd);
return err;
}
static int st_ehci_platform_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
int clk;
usb_remove_hcd(hcd);
if (pdata->power_off)
pdata->power_off(dev);
for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++)
clk_put(priv->clks[clk]);
usb_put_hcd(hcd);
if (pdata == &ehci_platform_defaults)
dev->dev.platform_data = NULL;
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int st_ehci_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
struct platform_device *pdev = to_platform_device(dev);
bool do_wakeup = device_may_wakeup(dev);
int ret;
ret = ehci_suspend(hcd, do_wakeup);
if (ret)
return ret;
if (pdata->power_suspend)
pdata->power_suspend(pdev);
pinctrl_pm_select_sleep_state(dev);
return ret;
}
static int st_ehci_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
struct platform_device *pdev = to_platform_device(dev);
int err;
pinctrl_pm_select_default_state(dev);
if (pdata->power_on) {
err = pdata->power_on(pdev);
if (err < 0)
return err;
}
ehci_resume(hcd, false);
return 0;
}
static SIMPLE_DEV_PM_OPS(st_ehci_pm_ops, st_ehci_suspend, st_ehci_resume);
#endif /* CONFIG_PM_SLEEP */
static const struct of_device_id st_ehci_ids[] = {
{ .compatible = "st,st-ehci-300x", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, st_ehci_ids);
static struct platform_driver ehci_platform_driver = {
.probe = st_ehci_platform_probe,
.remove = st_ehci_platform_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "st-ehci",
#ifdef CONFIG_PM_SLEEP
.pm = &st_ehci_pm_ops,
#endif
.of_match_table = st_ehci_ids,
}
};
static int __init ehci_platform_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
return platform_driver_register(&ehci_platform_driver);
}
module_init(ehci_platform_init);
static void __exit ehci_platform_cleanup(void)
{
platform_driver_unregister(&ehci_platform_driver);
}
module_exit(ehci_platform_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
MODULE_LICENSE("GPL");