mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
5567f9ddaf
This patch adds a DTS file for Sony Xperia Z1 Compact with support for regulators, serial UART, eMMC/SD-card, USB, charger, backlight, coincell and buttons. Work based on arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts. Signed-off-by: Attila Szöllősi <ata2001@airmail.cc> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
437 lines
8.2 KiB
Plaintext
437 lines
8.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
#include "qcom-msm8974.dtsi"
|
|
#include "qcom-pm8841.dtsi"
|
|
#include "qcom-pm8941.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
|
|
/ {
|
|
model = "Sony Xperia Z1 Compact";
|
|
compatible = "sony,xperia-amami", "qcom,msm8974";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_pin_a>;
|
|
|
|
volume-down {
|
|
label = "volume_down";
|
|
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
|
|
camera-snapshot {
|
|
label = "camera_snapshot";
|
|
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_CAMERA>;
|
|
};
|
|
|
|
camera-focus {
|
|
label = "camera_focus";
|
|
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_CAMERA_FOCUS>;
|
|
};
|
|
|
|
volume-up {
|
|
label = "volume_up";
|
|
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
reg = <0 0x40000000>, <0x40000000 0x40000000>;
|
|
device_type = "memory";
|
|
};
|
|
|
|
smd {
|
|
rpm {
|
|
rpm_requests {
|
|
pm8841-regulators {
|
|
s1 {
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
s2 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
s4 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
};
|
|
|
|
pm8941-regulators {
|
|
vdd_l1_l3-supply = <&pm8941_s1>;
|
|
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
|
|
vdd_l4_l11-supply = <&pm8941_s1>;
|
|
vdd_l5_l7-supply = <&pm8941_s2>;
|
|
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
|
|
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
|
|
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
|
|
vdd_l21-supply = <&vreg_boost>;
|
|
|
|
s1 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
s2 {
|
|
regulator-min-microvolt = <2150000>;
|
|
regulator-max-microvolt = <2150000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
s3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
s4 {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
l1 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
l4 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l9 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
l11 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
};
|
|
|
|
l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
l15 {
|
|
regulator-min-microvolt = <2050000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
l16 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
l17 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
l18 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
l19 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
l20 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-allow-set-load;
|
|
regulator-boot-on;
|
|
regulator-system-load = <200000>;
|
|
};
|
|
|
|
l21 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
|
|
l22 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
l23 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
l24 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
sdhci@f9824900 {
|
|
status = "ok";
|
|
|
|
vmmc-supply = <&pm8941_l20>;
|
|
vqmmc-supply = <&pm8941_s3>;
|
|
|
|
bus-width = <8>;
|
|
non-removable;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc1_pin_a>;
|
|
};
|
|
|
|
sdhci@f98a4900 {
|
|
status = "ok";
|
|
|
|
bus-width = <4>;
|
|
|
|
vmmc-supply = <&pm8941_l21>;
|
|
vqmmc-supply = <&pm8941_l13>;
|
|
|
|
cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
|
|
};
|
|
|
|
serial@f991e000 {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&blsp1_uart2_pin_a>;
|
|
};
|
|
|
|
|
|
pinctrl@fd510000 {
|
|
blsp1_uart2_pin_a: blsp1-uart2-pin-active {
|
|
rx {
|
|
pins = "gpio5";
|
|
function = "blsp_uart2";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
tx {
|
|
pins = "gpio4";
|
|
function = "blsp_uart2";
|
|
|
|
drive-strength = <4>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c2_pins: i2c2 {
|
|
mux {
|
|
pins = "gpio6", "gpio7";
|
|
function = "blsp_i2c2";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdhc1_pin_a: sdhc1-pin-active {
|
|
clk {
|
|
pins = "sdc1_clk";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc1_cmd", "sdc1_data";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdhc2_cd_pin_a: sdhc2-cd-pin-active {
|
|
pins = "gpio62";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
sdhc2_pin_a: sdhc2-pin-active {
|
|
clk {
|
|
pins = "sdc2_clk";
|
|
drive-strength = <10>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc2_cmd", "sdc2_data";
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
dma-controller@f9944000 {
|
|
qcom,controlled-remotely;
|
|
};
|
|
|
|
usb@f9a55000 {
|
|
status = "ok";
|
|
|
|
phys = <&usb_hs1_phy>;
|
|
phy-select = <&tcsr 0xb000 0>;
|
|
extcon = <&smbb>, <&usb_id>;
|
|
vbus-supply = <&chg_otg>;
|
|
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
|
|
ulpi {
|
|
phy@a {
|
|
status = "ok";
|
|
|
|
v1p8-supply = <&pm8941_l6>;
|
|
v3p3-supply = <&pm8941_l24>;
|
|
|
|
extcon = <&smbb>;
|
|
qcom,init-seq = /bits/ 8 <0x1 0x64>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
pm8941@0 {
|
|
charger@1000 {
|
|
qcom,fast-charge-safe-current = <1300000>;
|
|
qcom,fast-charge-current-limit = <1300000>;
|
|
qcom,dc-current-limit = <1300000>;
|
|
qcom,fast-charge-safe-voltage = <4400000>;
|
|
qcom,fast-charge-high-threshold-voltage = <4350000>;
|
|
qcom,fast-charge-low-threshold-voltage = <3400000>;
|
|
qcom,auto-recharge-threshold-voltage = <4200000>;
|
|
qcom,minimum-input-voltage = <4300000>;
|
|
};
|
|
|
|
gpios@c000 {
|
|
gpio_keys_pin_a: gpio-keys-active {
|
|
pins = "gpio2", "gpio3", "gpio4", "gpio5";
|
|
function = "normal";
|
|
|
|
bias-pull-up;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
};
|
|
|
|
coincell@2800 {
|
|
status = "ok";
|
|
qcom,rset-ohms = <2100>;
|
|
qcom,vset-millivolts = <3000>;
|
|
};
|
|
};
|
|
|
|
pm8941@1 {
|
|
wled@d800 {
|
|
status = "ok";
|
|
|
|
qcom,cs-out;
|
|
qcom,current-limit = <20>;
|
|
qcom,current-boost-limit = <805>;
|
|
qcom,switching-freq = <1600>;
|
|
qcom,ovp = <29>;
|
|
qcom,num-strings = <2>;
|
|
};
|
|
};
|
|
};
|