renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00
Code
c25f7cf203
linux-next/drivers/char/rio/rioroute.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

1040 lines
34 KiB
C
Raw Blame History

/*
** -----------------------------------------------------------------------------
**
** Perle Specialix driver for Linux
** Ported from existing RIO Driver for SCO sources.
*
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
** Module : rioroute.c
** SID : 1.3
** Last Modified : 11/6/98 10:33:46
** Retrieved : 11/6/98 10:33:50
**
** ident @(#)rioroute.c 1.3
**
** -----------------------------------------------------------------------------
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/string.h>
#include <asm/uaccess.h>
#include <linux/termios.h>
#include <linux/serial.h>
#include <linux/generic_serial.h>
#include "linux_compat.h"
#include "rio_linux.h"
#include "pkt.h"
#include "daemon.h"
#include "rio.h"
#include "riospace.h"
#include "cmdpkt.h"
#include "map.h"
#include "rup.h"
#include "port.h"
#include "riodrvr.h"
#include "rioinfo.h"
#include "func.h"
#include "errors.h"
#include "pci.h"
#include "parmmap.h"
#include "unixrup.h"
#include "board.h"
#include "host.h"
#include "phb.h"
#include "link.h"
#include "cmdblk.h"
#include "route.h"
#include "cirrus.h"
#include "rioioctl.h"
#include "param.h"
static int RIOCheckIsolated(struct rio_info *, struct Host *, unsigned int);
static int RIOIsolate(struct rio_info *, struct Host *, unsigned int);
static int RIOCheck(struct Host *, unsigned int);
static void RIOConCon(struct rio_info *, struct Host *, unsigned int, unsigned int, unsigned int, unsigned int, int);
/*
** Incoming on the ROUTE_RUP
** I wrote this while I was tired. Forgive me.
*/
int RIORouteRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem * PacketP)
{
struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data;
struct PktCmd_M *PktReplyP;
struct CmdBlk *CmdBlkP;
struct Port *PortP;
struct Map *MapP;
struct Top *TopP;
int ThisLink, ThisLinkMin, ThisLinkMax;
int port;
int Mod, Mod1, Mod2;
unsigned short RtaType;
unsigned int RtaUniq;
unsigned int ThisUnit, ThisUnit2; /* 2 ids to accommodate 16 port RTA */
unsigned int OldUnit, NewUnit, OldLink, NewLink;
char *MyType, *MyName;
int Lies;
unsigned long flags;
/*
** Is this unit telling us it's current link topology?
*/
if (readb(&PktCmdP->Command) == ROUTE_TOPOLOGY) {
MapP = HostP->Mapping;
/*
** The packet can be sent either by the host or by an RTA.
** If it comes from the host, then we need to fill in the
** Topology array in the host structure. If it came in
** from an RTA then we need to fill in the Mapping structure's
** Topology array for the unit.
*/
if (Rup >= (unsigned short) MAX_RUP) {
ThisUnit = HOST_ID;
TopP = HostP->Topology;
MyType = "Host";
MyName = HostP->Name;
ThisLinkMin = ThisLinkMax = Rup - MAX_RUP;
} else {
ThisUnit = Rup + 1;
TopP = HostP->Mapping[Rup].Topology;
MyType = "RTA";
MyName = HostP->Mapping[Rup].Name;
ThisLinkMin = 0;
ThisLinkMax = LINKS_PER_UNIT - 1;
}
/*
** Lies will not be tolerated.
** If any pair of links claim to be connected to the same
** place, then ignore this packet completely.
*/
Lies = 0;
for (ThisLink = ThisLinkMin + 1; ThisLink <= ThisLinkMax; ThisLink++) {
/*
** it won't lie about network interconnect, total disconnects
** and no-IDs. (or at least, it doesn't *matter* if it does)
*/
if (readb(&PktCmdP->RouteTopology[ThisLink].Unit) > (unsigned short) MAX_RUP)
continue;
for (NewLink = ThisLinkMin; NewLink < ThisLink; NewLink++) {
if ((readb(&PktCmdP->RouteTopology[ThisLink].Unit) == readb(&PktCmdP->RouteTopology[NewLink].Unit)) && (readb(&PktCmdP->RouteTopology[ThisLink].Link) == readb(&PktCmdP->RouteTopology[NewLink].Link))) {
Lies++;
}
}
}
if (Lies) {
rio_dprintk(RIO_DEBUG_ROUTE, "LIES! DAMN LIES! %d LIES!\n", Lies);
rio_dprintk(RIO_DEBUG_ROUTE, "%d:%c %d:%c %d:%c %d:%c\n",
readb(&PktCmdP->RouteTopology[0].Unit),
'A' + readb(&PktCmdP->RouteTopology[0].Link),
readb(&PktCmdP->RouteTopology[1].Unit),
'A' + readb(&PktCmdP->RouteTopology[1].Link), readb(&PktCmdP->RouteTopology[2].Unit), 'A' + readb(&PktCmdP->RouteTopology[2].Link), readb(&PktCmdP->RouteTopology[3].Unit), 'A' + readb(&PktCmdP->RouteTopology[3].Link));
return 1;
}
/*
** now, process each link.
*/
for (ThisLink = ThisLinkMin; ThisLink <= ThisLinkMax; ThisLink++) {
/*
** this is what it was connected to
*/
OldUnit = TopP[ThisLink].Unit;
OldLink = TopP[ThisLink].Link;
/*
** this is what it is now connected to
*/
NewUnit = readb(&PktCmdP->RouteTopology[ThisLink].Unit);
NewLink = readb(&PktCmdP->RouteTopology[ThisLink].Link);
if (OldUnit != NewUnit || OldLink != NewLink) {
/*
** something has changed!
*/
if (NewUnit > MAX_RUP && NewUnit != ROUTE_DISCONNECT && NewUnit != ROUTE_NO_ID && NewUnit != ROUTE_INTERCONNECT) {
rio_dprintk(RIO_DEBUG_ROUTE, "I have a link from %s %s to unit %d:%d - I don't like it.\n", MyType, MyName, NewUnit, NewLink);
} else {
/*
** put the new values in
*/
TopP[ThisLink].Unit = NewUnit;
TopP[ThisLink].Link = NewLink;
RIOSetChange(p);
if (OldUnit <= MAX_RUP) {
/*
** If something has become bust, then re-enable them messages
*/
if (!p->RIONoMessage)
RIOConCon(p, HostP, ThisUnit, ThisLink, OldUnit, OldLink, DISCONNECT);
}
if ((NewUnit <= MAX_RUP) && !p->RIONoMessage)
RIOConCon(p, HostP, ThisUnit, ThisLink, NewUnit, NewLink, CONNECT);
if (NewUnit == ROUTE_NO_ID)
rio_dprintk(RIO_DEBUG_ROUTE, "%s %s (%c) is connected to an unconfigured unit.\n", MyType, MyName, 'A' + ThisLink);
if (NewUnit == ROUTE_INTERCONNECT) {
if (!p->RIONoMessage)
printk(KERN_DEBUG "rio: %s '%s' (%c) is connected to another network.\n", MyType, MyName, 'A' + ThisLink);
}
/*
** perform an update for 'the other end', so that these messages
** only appears once. Only disconnect the other end if it is pointing
** at us!
*/
if (OldUnit == HOST_ID) {
if (HostP->Topology[OldLink].Unit == ThisUnit && HostP->Topology[OldLink].Link == ThisLink) {
rio_dprintk(RIO_DEBUG_ROUTE, "SETTING HOST (%c) TO DISCONNECTED!\n", OldLink + 'A');
HostP->Topology[OldLink].Unit = ROUTE_DISCONNECT;
HostP->Topology[OldLink].Link = NO_LINK;
} else {
rio_dprintk(RIO_DEBUG_ROUTE, "HOST(%c) WAS NOT CONNECTED TO %s (%c)!\n", OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A');
}
} else if (OldUnit <= MAX_RUP) {
if (HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit == ThisUnit && HostP->Mapping[OldUnit - 1].Topology[OldLink].Link == ThisLink) {
rio_dprintk(RIO_DEBUG_ROUTE, "SETTING RTA %s (%c) TO DISCONNECTED!\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A');
HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit = ROUTE_DISCONNECT;
HostP->Mapping[OldUnit - 1].Topology[OldLink].Link = NO_LINK;
} else {
rio_dprintk(RIO_DEBUG_ROUTE, "RTA %s (%c) WAS NOT CONNECTED TO %s (%c)\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A');
}
}
if (NewUnit == HOST_ID) {
rio_dprintk(RIO_DEBUG_ROUTE, "MARKING HOST (%c) CONNECTED TO %s (%c)\n", NewLink + 'A', MyName, ThisLink + 'A');
HostP->Topology[NewLink].Unit = ThisUnit;
HostP->Topology[NewLink].Link = ThisLink;
} else if (NewUnit <= MAX_RUP) {
rio_dprintk(RIO_DEBUG_ROUTE, "MARKING RTA %s (%c) CONNECTED TO %s (%c)\n", HostP->Mapping[NewUnit - 1].Name, NewLink + 'A', MyName, ThisLink + 'A');
HostP->Mapping[NewUnit - 1].Topology[NewLink].Unit = ThisUnit;
HostP->Mapping[NewUnit - 1].Topology[NewLink].Link = ThisLink;
}
}
RIOSetChange(p);
RIOCheckIsolated(p, HostP, OldUnit);
}
}
return 1;
}
/*
** The only other command we recognise is a route_request command
*/
if (readb(&PktCmdP->Command) != ROUTE_REQUEST) {
rio_dprintk(RIO_DEBUG_ROUTE, "Unknown command %d received on rup %d host %p ROUTE_RUP\n", readb(&PktCmdP->Command), Rup, HostP);
return 1;
}
RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24);
/*
** Determine if 8 or 16 port RTA
*/
RtaType = GetUnitType(RtaUniq);
rio_dprintk(RIO_DEBUG_ROUTE, "Received a request for an ID for serial number %x\n", RtaUniq);
Mod = readb(&PktCmdP->ModuleTypes);
Mod1 = LONYBLE(Mod);
if (RtaType == TYPE_RTA16) {
/*
** Only one ident is set for a 16 port RTA. To make compatible
** with 8 port, set 2nd ident in Mod2 to the same as Mod1.
*/
Mod2 = Mod1;
rio_dprintk(RIO_DEBUG_ROUTE, "Backplane type is %s (all ports)\n", p->RIOModuleTypes[Mod1].Name);
} else {
Mod2 = HINYBLE(Mod);
rio_dprintk(RIO_DEBUG_ROUTE, "Module types are %s (ports 0-3) and %s (ports 4-7)\n", p->RIOModuleTypes[Mod1].Name, p->RIOModuleTypes[Mod2].Name);
}
/*
** try to unhook a command block from the command free list.
*/
if (!(CmdBlkP = RIOGetCmdBlk())) {
rio_dprintk(RIO_DEBUG_ROUTE, "No command blocks to route RTA! come back later.\n");
return 0;
}
/*
** Fill in the default info on the command block
*/
CmdBlkP->Packet.dest_unit = Rup;
CmdBlkP->Packet.dest_port = ROUTE_RUP;
CmdBlkP->Packet.src_unit = HOST_ID;
CmdBlkP->Packet.src_port = ROUTE_RUP;
CmdBlkP->Packet.len = PKT_CMD_BIT | 1;
CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL;
PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data;
if (!RIOBootOk(p, HostP, RtaUniq)) {
rio_dprintk(RIO_DEBUG_ROUTE, "RTA %x tried to get an ID, but does not belong - FOAD it!\n", RtaUniq);
PktReplyP->Command = ROUTE_FOAD;
memcpy(PktReplyP->CommandText, "RT_FOAD", 7);
RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
return 1;
}
/*
** Check to see if the RTA is configured for this host
*/
for (ThisUnit = 0; ThisUnit < MAX_RUP; ThisUnit++) {
rio_dprintk(RIO_DEBUG_ROUTE, "Entry %d Flags=%s %s UniqueNum=0x%x\n",
ThisUnit, HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE ? "Slot-In-Use" : "Not In Use", HostP->Mapping[ThisUnit].Flags & SLOT_TENTATIVE ? "Slot-Tentative" : "Not Tentative", HostP->Mapping[ThisUnit].RtaUniqueNum);
/*
** We have an entry for it.
*/
if ((HostP->Mapping[ThisUnit].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (HostP->Mapping[ThisUnit].RtaUniqueNum == RtaUniq)) {
if (RtaType == TYPE_RTA16) {
ThisUnit2 = HostP->Mapping[ThisUnit].ID2 - 1;
rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slots %d+%d\n", RtaUniq, ThisUnit, ThisUnit2);
} else
rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slot %d\n", RtaUniq, ThisUnit);
/*
** If we have no knowledge of booting it, then the host has
** been re-booted, and so we must kill the RTA, so that it
** will be booted again (potentially with new bins)
** and it will then re-ask for an ID, which we will service.
*/
if ((HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) && !(HostP->Mapping[ThisUnit].Flags & RTA_BOOTED)) {
if (!(HostP->Mapping[ThisUnit].Flags & MSG_DONE)) {
if (!p->RIONoMessage)
printk(KERN_DEBUG "rio: RTA '%s' is being updated.\n", HostP->Mapping[ThisUnit].Name);
HostP->Mapping[ThisUnit].Flags |= MSG_DONE;
}
PktReplyP->Command = ROUTE_FOAD;
memcpy(PktReplyP->CommandText, "RT_FOAD", 7);
RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
return 1;
}
/*
** Send the ID (entry) to this RTA. The ID number is implicit as
** the offset into the table. It is worth noting at this stage
** that offset zero in the table contains the entries for the
** RTA with ID 1!!!!
*/
PktReplyP->Command = ROUTE_ALLOCATE;
PktReplyP->IDNum = ThisUnit + 1;
if (RtaType == TYPE_RTA16) {
if (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE)
/*
** Adjust the phb and tx pkt dest_units for 2nd block of 8
** only if the RTA has ports associated (SLOT_IN_USE)
*/
RIOFixPhbs(p, HostP, ThisUnit2);
PktReplyP->IDNum2 = ThisUnit2 + 1;
rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated IDs %d+%d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum, PktReplyP->IDNum2);
} else {
PktReplyP->IDNum2 = ROUTE_NO_ID;
rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated ID %d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum);
}
memcpy(PktReplyP->CommandText, "RT_ALLOCAT", 10);
RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
/*
** If this is a freshly booted RTA, then we need to re-open
** the ports, if any where open, so that data may once more
** flow around the system!
*/
if ((HostP->Mapping[ThisUnit].Flags & RTA_NEWBOOT) && (HostP->Mapping[ThisUnit].SysPort != NO_PORT)) {
/*
** look at the ports associated with this beast and
** see if any where open. If they was, then re-open
** them, using the info from the tty flags.
*/
for (port = 0; port < PORTS_PER_RTA; port++) {
PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort];
if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) {
rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n");
rio_spin_lock_irqsave(&PortP->portSem, flags);
PortP->MagicFlags |= MAGIC_REBOOT;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
}
}
if (RtaType == TYPE_RTA16) {
for (port = 0; port < PORTS_PER_RTA; port++) {
PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort];
if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) {
rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n");
rio_spin_lock_irqsave(&PortP->portSem, flags);
PortP->MagicFlags |= MAGIC_REBOOT;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
}
}
}
}
/*
** keep a copy of the module types!
*/
HostP->UnixRups[ThisUnit].ModTypes = Mod;
if (RtaType == TYPE_RTA16)
HostP->UnixRups[ThisUnit2].ModTypes = Mod;
/*
** If either of the modules on this unit is read-only or write-only
** or none-xprint, then we need to transfer that info over to the
** relevant ports.
*/
if (HostP->Mapping[ThisUnit].SysPort != NO_PORT) {
for (port = 0; port < PORTS_PER_MODULE; port++) {
p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK;
p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port];
p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK;
p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port];
}
if (RtaType == TYPE_RTA16) {
for (port = 0; port < PORTS_PER_MODULE; port++) {
p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK;
p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port];
p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK;
p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port];
}
}
}
/*
** Job done, get on with the interrupts!
*/
return 1;
}
}
/*
** There is no table entry for this RTA at all.
**
** Lets check to see if we actually booted this unit - if not,
** then we reset it and it will go round the loop of being booted
** we can then worry about trying to fit it into the table.
*/
for (ThisUnit = 0; ThisUnit < HostP->NumExtraBooted; ThisUnit++)
if (HostP->ExtraUnits[ThisUnit] == RtaUniq)
break;
if (ThisUnit == HostP->NumExtraBooted && ThisUnit != MAX_EXTRA_UNITS) {
/*
** if the unit wasn't in the table, and the table wasn't full, then
** we reset the unit, because we didn't boot it.
** However, if the table is full, it could be that we did boot
** this unit, and so we won't reboot it, because it isn't really
** all that disasterous to keep the old bins in most cases. This
** is a rather tacky feature, but we are on the edge of reallity
** here, because the implication is that someone has connected
** 16+MAX_EXTRA_UNITS onto one host.
*/
static int UnknownMesgDone = 0;
if (!UnknownMesgDone) {
if (!p->RIONoMessage)
printk(KERN_DEBUG "rio: One or more unknown RTAs are being updated.\n");
UnknownMesgDone = 1;
}
PktReplyP->Command = ROUTE_FOAD;
memcpy(PktReplyP->CommandText, "RT_FOAD", 7);
} else {
/*
** we did boot it (as an extra), and there may now be a table
** slot free (because of a delete), so we will try to make
** a tentative entry for it, so that the configurator can see it
** and fill in the details for us.
*/
if (RtaType == TYPE_RTA16) {
if (RIOFindFreeID(p, HostP, &ThisUnit, &ThisUnit2) == 0) {
RIODefaultName(p, HostP, ThisUnit);
rio_fill_host_slot(ThisUnit, ThisUnit2, RtaUniq, HostP);
}
} else {
if (RIOFindFreeID(p, HostP, &ThisUnit, NULL) == 0) {
RIODefaultName(p, HostP, ThisUnit);
rio_fill_host_slot(ThisUnit, 0, RtaUniq, HostP);
}
}
PktReplyP->Command = ROUTE_USED;
memcpy(PktReplyP->CommandText, "RT_USED", 7);
}
RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
return 1;
}
void RIOFixPhbs(struct rio_info *p, struct Host *HostP, unsigned int unit)
{
unsigned short link, port;
struct Port *PortP;
unsigned long flags;
int PortN = HostP->Mapping[unit].SysPort;
rio_dprintk(RIO_DEBUG_ROUTE, "RIOFixPhbs unit %d sysport %d\n", unit, PortN);
if (PortN != -1) {
unsigned short dest_unit = HostP->Mapping[unit].ID2;
/*
** Get the link number used for the 1st 8 phbs on this unit.
*/
PortP = p->RIOPortp[HostP->Mapping[dest_unit - 1].SysPort];
link = readw(&PortP->PhbP->link);
for (port = 0; port < PORTS_PER_RTA; port++, PortN++) {
unsigned short dest_port = port + 8;
u16 __iomem *TxPktP;
struct PKT __iomem *Pkt;
PortP = p->RIOPortp[PortN];
rio_spin_lock_irqsave(&PortP->portSem, flags);
/*
** If RTA is not powered on, the tx packets will be
** unset, so go no further.
*/
if (!PortP->TxStart) {
rio_dprintk(RIO_DEBUG_ROUTE, "Tx pkts not set up yet\n");
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
break;
}
/*
** For the second slot of a 16 port RTA, the driver needs to
** sort out the phb to port mappings. The dest_unit for this
** group of 8 phbs is set to the dest_unit of the accompanying
** 8 port block. The dest_port of the second unit is set to
** be in the range 8-15 (i.e. 8 is added). Thus, for a 16 port
** RTA with IDs 5 and 6, traffic bound for port 6 of unit 6
** (being the second map ID) will be sent to dest_unit 5, port
** 14. When this RTA is deleted, dest_unit for ID 6 will be
** restored, and the dest_port will be reduced by 8.
** Transmit packets also have a destination field which needs
** adjusting in the same manner.
** Note that the unit/port bytes in 'dest' are swapped.
** We also need to adjust the phb and rup link numbers for the
** second block of 8 ttys.
*/
for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) {
/*
** *TxPktP is the pointer to the transmit packet on the host
** card. This needs to be translated into a 32 bit pointer
** so it can be accessed from the driver.
*/
Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(TxPktP));
/*
** If the packet is used, reset it.
*/
Pkt = (struct PKT __iomem *) ((unsigned long) Pkt & ~PKT_IN_USE);
writeb(dest_unit, &Pkt->dest_unit);
writeb(dest_port, &Pkt->dest_port);
}
rio_dprintk(RIO_DEBUG_ROUTE, "phb dest: Old %x:%x New %x:%x\n", readw(&PortP->PhbP->destination) & 0xff, (readw(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port);
writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination);
writew(link, &PortP->PhbP->link);
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
}
/*
** Now make sure the range of ports to be serviced includes
** the 2nd 8 on this 16 port RTA.
*/
if (link > 3)
return;
if (((unit * 8) + 7) > readw(&HostP->LinkStrP[link].last_port)) {
rio_dprintk(RIO_DEBUG_ROUTE, "last port on host link %d: %d\n", link, (unit * 8) + 7);
writew((unit * 8) + 7, &HostP->LinkStrP[link].last_port);
}
}
}
/*
** Check to see if the new disconnection has isolated this unit.
** If it has, then invalidate all its link information, and tell
** the world about it. This is done to ensure that the configurator
** only gets up-to-date information about what is going on.
*/
static int RIOCheckIsolated(struct rio_info *p, struct Host *HostP, unsigned int UnitId)
{
unsigned long flags;
rio_spin_lock_irqsave(&HostP->HostLock, flags);
if (RIOCheck(HostP, UnitId)) {
rio_dprintk(RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId);
rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
return (0);
}
RIOIsolate(p, HostP, UnitId);
RIOSetChange(p);
rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
return 1;
}
/*
** Invalidate all the link interconnectivity of this unit, and of
** all the units attached to it. This will mean that the entire
** subnet will re-introduce itself.
*/
static int RIOIsolate(struct rio_info *p, struct Host *HostP, unsigned int UnitId)
{
unsigned int link, unit;
UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */
if (UnitId >= MAX_RUP) /* dontcha just lurv unsigned maths! */
return (0);
if (HostP->Mapping[UnitId].Flags & BEEN_HERE)
return (0);
HostP->Mapping[UnitId].Flags |= BEEN_HERE;
if (p->RIOPrintDisabled == DO_PRINT)
rio_dprintk(RIO_DEBUG_ROUTE, "RIOMesgIsolated %s", HostP->Mapping[UnitId].Name);
for (link = 0; link < LINKS_PER_UNIT; link++) {
unit = HostP->Mapping[UnitId].Topology[link].Unit;
HostP->Mapping[UnitId].Topology[link].Unit = ROUTE_DISCONNECT;
HostP->Mapping[UnitId].Topology[link].Link = NO_LINK;
RIOIsolate(p, HostP, unit);
}
HostP->Mapping[UnitId].Flags &= ~BEEN_HERE;
return 1;
}
static int RIOCheck(struct Host *HostP, unsigned int UnitId)
{
unsigned char link;
/* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */
rio_dprintk(RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId);
if (UnitId == HOST_ID) {
/* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is NOT isolated - it IS the host!\n", UnitId)); */
return 1;
}
UnitId--;
if (UnitId >= MAX_RUP) {
/* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d - ignored.\n", UnitId)); */
return 0;
}
for (link = 0; link < LINKS_PER_UNIT; link++) {
if (HostP->Mapping[UnitId].Topology[link].Unit == HOST_ID) {
/* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected directly to host via link (%c).\n",
UnitId, 'A'+link)); */
return 1;
}
}
if (HostP->Mapping[UnitId].Flags & BEEN_HERE) {
/* rio_dprint(RIO_DEBUG_ROUTE, ("Been to Unit %d before - ignoring\n", UnitId)); */
return 0;
}
HostP->Mapping[UnitId].Flags |= BEEN_HERE;
for (link = 0; link < LINKS_PER_UNIT; link++) {
/* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d check link (%c)\n", UnitId,'A'+link)); */
if (RIOCheck(HostP, HostP->Mapping[UnitId].Topology[link].Unit)) {
/* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected to something that knows the host via link (%c)\n", UnitId,link+'A')); */
HostP->Mapping[UnitId].Flags &= ~BEEN_HERE;
return 1;
}
}
HostP->Mapping[UnitId].Flags &= ~BEEN_HERE;
/* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESNT KNOW THE HOST!\n", UnitId)); */
return 0;
}
/*
** Returns the type of unit (host, 16/8 port RTA)
*/
unsigned int GetUnitType(unsigned int Uniq)
{
switch ((Uniq >> 28) & 0xf) {
case RIO_AT:
case RIO_MCA:
case RIO_EISA:
case RIO_PCI:
rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Host\n");
return (TYPE_HOST);
case RIO_RTA_16:
rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 16 port RTA\n");
return (TYPE_RTA16);
case RIO_RTA:
rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 8 port RTA\n");
return (TYPE_RTA8);
default:
rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Unrecognised\n");
return (99);
}
}
int RIOSetChange(struct rio_info *p)
{
if (p->RIOQuickCheck != NOT_CHANGED)
return (0);
p->RIOQuickCheck = CHANGED;
if (p->RIOSignalProcess) {
rio_dprintk(RIO_DEBUG_ROUTE, "Send SIG-HUP");
/*
psignal( RIOSignalProcess, SIGHUP );
*/
}
return (0);
}
static void RIOConCon(struct rio_info *p,
struct Host *HostP,
unsigned int FromId,
unsigned int FromLink,
unsigned int ToId,
unsigned int ToLink,
int Change)
{
char *FromName;
char *FromType;
char *ToName;
char *ToType;
unsigned int tp;
/*
** 15.10.1998 ARG - ESIL 0759
** (Part) fix for port being trashed when opened whilst RTA "disconnected"
**
** What's this doing in here anyway ?
** It was causing the port to be 'unmapped' if opened whilst RTA "disconnected"
**
** 09.12.1998 ARG - ESIL 0776 - part fix
** Okay, We've found out what this was all about now !
** Someone had botched this to use RIOHalted to indicated the number of RTAs
** 'disconnected'. The value in RIOHalted was then being used in the
** 'RIO_QUICK_CHECK' ioctl. A none zero value indicating that a least one RTA
** is 'disconnected'. The change was put in to satisfy a customer's needs.
** Having taken this bit of code out 'RIO_QUICK_CHECK' now no longer works for
** the customer.
**
if (Change == CONNECT) {
if (p->RIOHalted) p->RIOHalted --;
}
else {
p->RIOHalted ++;
}
**
** So - we need to implement it slightly differently - a new member of the
** rio_info struct - RIORtaDisCons (RIO RTA connections) keeps track of RTA
** connections and disconnections.
*/
if (Change == CONNECT) {
if (p->RIORtaDisCons)
p->RIORtaDisCons--;
} else {
p->RIORtaDisCons++;
}
if (p->RIOPrintDisabled == DONT_PRINT)
return;
if (FromId > ToId) {
tp = FromId;
FromId = ToId;
ToId = tp;
tp = FromLink;
FromLink = ToLink;
ToLink = tp;
}
FromName = FromId ? HostP->Mapping[FromId - 1].Name : HostP->Name;
FromType = FromId ? "RTA" : "HOST";
ToName = ToId ? HostP->Mapping[ToId - 1].Name : HostP->Name;
ToType = ToId ? "RTA" : "HOST";
rio_dprintk(RIO_DEBUG_ROUTE, "Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected");
printk(KERN_DEBUG "rio: Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected");
}
/*
** RIORemoveFromSavedTable :
**
** Delete and RTA entry from the saved table given to us
** by the configuration program.
*/
static int RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap)
{
int entry;
/*
** We loop for all entries even after finding an entry and
** zeroing it because we may have two entries to delete if
** it's a 16 port RTA.
*/
for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) {
if (p->RIOSavedTable[entry].RtaUniqueNum == pMap->RtaUniqueNum) {
memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map));
}
}
return 0;
}
/*
** RIOCheckDisconnected :
**
** Scan the unit links to and return zero if the unit is completely
** disconnected.
*/
static int RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit)
{
int link;
rio_dprintk(RIO_DEBUG_ROUTE, "RIOFreeDisconnect unit %d\n", unit);
/*
** If the slot is tentative and does not belong to the
** second half of a 16 port RTA then scan to see if
** is disconnected.
*/
for (link = 0; link < LINKS_PER_UNIT; link++) {
if (HostP->Mapping[unit].Topology[link].Unit != ROUTE_DISCONNECT)
break;
}
/*
** If not all links are disconnected then we can forget about it.
*/
if (link < LINKS_PER_UNIT)
return 1;
#ifdef NEED_TO_FIX_THIS
/* Ok so all the links are disconnected. But we may have only just
** made this slot tentative and not yet received a topology update.
** Lets check how long ago we made it tentative.
*/
rio_dprintk(RIO_DEBUG_ROUTE, "Just about to check LBOLT on entry %d\n", unit);
if (drv_getparm(LBOLT, (ulong_t *) & current_time))
rio_dprintk(RIO_DEBUG_ROUTE, "drv_getparm(LBOLT,....) Failed.\n");
elapse_time = current_time - TentTime[unit];
rio_dprintk(RIO_DEBUG_ROUTE, "elapse %d = current %d - tent %d (%d usec)\n", elapse_time, current_time, TentTime[unit], drv_hztousec(elapse_time));
if (drv_hztousec(elapse_time) < WAIT_TO_FINISH) {
rio_dprintk(RIO_DEBUG_ROUTE, "Skipping slot %d, not timed out yet %d\n", unit, drv_hztousec(elapse_time));
return 1;
}
#endif
/*
** We have found an usable slot.
** If it is half of a 16 port RTA then delete the other half.
*/
if (HostP->Mapping[unit].ID2 != 0) {
int nOther = (HostP->Mapping[unit].ID2) - 1;
rio_dprintk(RIO_DEBUG_ROUTE, "RioFreedis second slot %d.\n", nOther);
memset(&HostP->Mapping[nOther], 0, sizeof(struct Map));
}
RIORemoveFromSavedTable(p, &HostP->Mapping[unit]);
return 0;
}
/*
** RIOFindFreeID :
**
** This function scans the given host table for either one
** or two free unit ID's.
*/
int RIOFindFreeID(struct rio_info *p, struct Host *HostP, unsigned int * pID1, unsigned int * pID2)
{
int unit, tempID;
/*
** Initialise the ID's to MAX_RUP.
** We do this to make the loop for setting the ID's as simple as
** possible.
*/
*pID1 = MAX_RUP;
if (pID2 != NULL)
*pID2 = MAX_RUP;
/*
** Scan all entries of the host mapping table for free slots.
** We scan for free slots first and then if that is not successful
** we start all over again looking for tentative slots we can re-use.
*/
for (unit = 0; unit < MAX_RUP; unit++) {
rio_dprintk(RIO_DEBUG_ROUTE, "Scanning unit %d\n", unit);
/*
** If the flags are zero then the slot is empty.
*/
if (HostP->Mapping[unit].Flags == 0) {
rio_dprintk(RIO_DEBUG_ROUTE, " This slot is empty.\n");
/*
** If we haven't allocated the first ID then do it now.
*/
if (*pID1 == MAX_RUP) {
rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for first unit %d\n", unit);
*pID1 = unit;
/*
** If the second ID is not needed then we can return
** now.
*/
if (pID2 == NULL)
return 0;
} else {
/*
** Allocate the second slot and return.
*/
rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for second unit %d\n", unit);
*pID2 = unit;
return 0;
}
}
}
/*
** If we manage to come out of the free slot loop then we
** need to start all over again looking for tentative slots
** that we can re-use.
*/
rio_dprintk(RIO_DEBUG_ROUTE, "Starting to scan for tentative slots\n");
for (unit = 0; unit < MAX_RUP; unit++) {
if (((HostP->Mapping[unit].Flags & SLOT_TENTATIVE) || (HostP->Mapping[unit].Flags == 0)) && !(HostP->Mapping[unit].Flags & RTA16_SECOND_SLOT)) {
rio_dprintk(RIO_DEBUG_ROUTE, " Slot %d looks promising.\n", unit);
if (unit == *pID1) {
rio_dprintk(RIO_DEBUG_ROUTE, " No it isn't, its the 1st half\n");
continue;
}
/*
** Slot is Tentative or Empty, but not a tentative second
** slot of a 16 porter.
** Attempt to free up this slot (and its parnter if
** it is a 16 port slot. The second slot will become
** empty after a call to RIOFreeDisconnected so thats why
** we look for empty slots above as well).
*/
if (HostP->Mapping[unit].Flags != 0)
if (RIOFreeDisconnected(p, HostP, unit) != 0)
continue;
/*
** If we haven't allocated the first ID then do it now.
*/
if (*pID1 == MAX_RUP) {
rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative entry for first unit %d\n", unit);
*pID1 = unit;
/*
** Clear out this slot now that we intend to use it.
*/
memset(&HostP->Mapping[unit], 0, sizeof(struct Map));
/*
** If the second ID is not needed then we can return
** now.
*/
if (pID2 == NULL)
return 0;
} else {
/*
** Allocate the second slot and return.
*/
rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative/empty entry for second unit %d\n", unit);
*pID2 = unit;
/*
** Clear out this slot now that we intend to use it.
*/
memset(&HostP->Mapping[unit], 0, sizeof(struct Map));
/* At this point under the right(wrong?) conditions
** we may have a first unit ID being higher than the
** second unit ID. This is a bad idea if we are about
** to fill the slots with a 16 port RTA.
** Better check and swap them over.
*/
if (*pID1 > *pID2) {
rio_dprintk(RIO_DEBUG_ROUTE, "Swapping IDS %d %d\n", *pID1, *pID2);
tempID = *pID1;
*pID1 = *pID2;
*pID2 = tempID;
}
return 0;
}
}
}
/*
** If we manage to get to the end of the second loop then we
** can give up and return a failure.
*/
return 1;
}
/*
** The link switch scenario.
**
** Rta Wun (A) is connected to Tuw (A).
** The tables are all up to date, and the system is OK.
**
** If Wun (A) is now moved to Wun (B) before Wun (A) can
** become disconnected, then the follow happens:
**
** Tuw (A) spots the change of unit:link at the other end
** of its link and Tuw sends a topology packet reflecting
** the change: Tuw (A) now disconnected from Wun (A), and
** this is closely followed by a packet indicating that
** Tuw (A) is now connected to Wun (B).
**
** Wun (B) will spot that it has now become connected, and
** Wun will send a topology packet, which indicates that
** both Wun (A) and Wun (B) is connected to Tuw (A).
**
** Eventually Wun (A) realises that it is now disconnected
** and Wun will send out a topology packet indicating that
** Wun (A) is now disconnected.
*/
View Git Blame Copy Permalink