Roman Byshko c2365ce5d5 usb: musb: replace hard coded registers with defines ... musb registers can be dumped using the file regdump which is created in debugfs. Up to now hard coded register addresses are used for that. Different glue layers however have different register addresses. The patch addresses this issue by substituting bare register addresses with defines. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>		2014-11-18 09:35:12 -06:00
..
am35x.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
blackfin.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
blackfin.h	usb: musb: drop a gigantic amount of ifdeferry	2011-07-01 14:31:10 -07:00
cppi_dma.c	usb: musb: dma: merge ->start/stop into create/destroy	2013-07-29 13:53:18 +03:00
cppi_dma.h
da8xx.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
davinci.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
davinci.h	usb: musb: davinci: Fix build breakage	2012-06-04 18:29:42 +03:00
jz4740.c	usb: musb: register nop transceiver driver for jz4740	2014-07-10 08:36:50 -05:00
Kconfig	usb: musb: omap2plus bus glue needs USB host support	2014-05-14 09:23:32 -05:00
Makefile	usb: musb: add support for JZ4740 usb device controller	2013-12-20 09:53:24 -06:00
musb_am335x.c	usb: musb: Fix panic upon musb_am335x module removal	2014-06-27 10:53:06 -05:00
musb_core.c	usb: musb: core: make sure musb is in RPM_ACTIVE on resume	2014-11-18 08:47:45 -06:00
musb_core.h	usb: musb: try a race-free wakeup	2014-11-05 13:26:41 -06:00
musb_cppi41.c	usb: musb: cppi41: restart hrtimer only if not yet done	2014-10-23 09:55:41 -05:00
musb_debug.h	usb: musb: remove extern qualifier from musb_debug.h header	2011-12-21 13:21:02 +02:00
musb_debugfs.c	usb: musb: replace hard coded registers with defines	2014-11-18 09:35:12 -06:00
musb_dma.h	usb: musb: introduce dma_channel.rx_packet_done	2014-06-30 14:26:24 -05:00
musb_dsps.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
musb_gadget_ep0.c	usb: musb: gadget: read ep0 fifo only if rxcount is non zero	2013-04-02 11:42:50 +03:00
musb_gadget.c	usb: musb: gadget: use udc-core's reset notifier	2014-11-10 17:19:34 -06:00
musb_gadget.h	usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes	2013-05-28 19:22:23 +03:00
musb_host.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
musb_host.h	usb: musb: fix prototype for musb_port_reset	2013-12-20 15:05:43 -06:00
musb_io.h	usb: musb: use io{read,write}*_rep accessors	2012-12-17 17:15:13 -08:00
musb_regs.h	usb: Fixed a few typos	2014-09-23 22:15:18 -07:00
musb_virthub.c	usb: musb: try a race-free wakeup	2014-11-05 13:26:41 -06:00
musbhsdma.c	usb: musb: dma: merge ->start/stop into create/destroy	2013-07-29 13:53:18 +03:00
musbhsdma.h	usb: musb: remove generic_interrupt	2012-11-06 15:32:13 +02:00
omap2430.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
omap2430.h	usb: start using the control module driver	2013-01-25 12:27:24 +02:00
tusb6010_omap.c	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
tusb6010.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
tusb6010.h	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
ux500_dma.c	usb: musb: ux500_dma: use dmaengine_xxx() APIs	2014-11-03 10:01:07 -06:00
ux500.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00