2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 23:53:55 +08:00
linux-next/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
Arnd Bergmann 4fda1e7387 64bit Rockchip devicetree changes containing fixes for pinctrl typos
and the use of keep-power-in-suspend in non-sdio nodes as well as the
 removal of the deprecated num-slots property from dwmmc nodes.
 
 rk3328 gets support for spdif, io-domains and usb (including enablement
 of usb on the evaluation board), while rk3368 gains support for spdif.
 
 The biggest chunk of course aims for the rk3399 with a number of pcie
 changes, support for the mali gpu, a new power-domain, sdmmc support
 on the firefly board and dynamic-power-coefficients.
 
 The gru family also gets support for their quite central pwm regulators
 using the newly introduced vctrl regulator types.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmET9EQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgZbjCACKFO9Hp8Xwwg2nEM8DL3i+MlGaqxjIrcsb
 WskuVOJjkAA4hMnrd7XvbpzJJusAquGqMd042ZCWtrNa1AwzCy0ZkYjDFNL27rXH
 DqrHmJZowSoTHxlo8QKaevXH3ZZnp8TDz4IqaD0+UZx7DgZSOjR1a+feseh1Jn/V
 9WBUJhNAFtKMiJBkTIpaDUk0E6OxIspdvlJurYmwUvDbfZKlpZrXHYKXSuUhFS9s
 JX4Dqi5eF96Mctpi8GhaHGf7awPQf4oQBZfsXxhhS/efzX/v0HWqUPt40o2THi0F
 ZbFFE3xAFaWisA+cbg8xnzJc8ZAwz2UmS6FgQ9lrqKyGN74buwgP
 =spNi
 -----END PGP SIGNATURE-----

Merge tag 'v4.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Pull "Rockchip dts64 changes for 4.14" from Heiko Stübner:

64bit Rockchip devicetree changes containing fixes for pinctrl typos
and the use of keep-power-in-suspend in non-sdio nodes as well as the
removal of the deprecated num-slots property from dwmmc nodes.

rk3328 gets support for spdif, io-domains and usb (including enablement
of usb on the evaluation board), while rk3368 gains support for spdif.

The biggest chunk of course aims for the rk3399 with a number of pcie
changes, support for the mali gpu, a new power-domain, sdmmc support
on the firefly board and dynamic-power-coefficients.

The gru family also gets support for their quite central pwm regulators
using the newly introduced vctrl regulator types.

* tag 'v4.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: update dynamic-power-coefficient for rk3399
  arm64: dts: rockchip: add rk3328 spdif node
  arm64: dts: rockchip: add rk3368 spdif node
  arm64: dts: rockchip: enable sdmmc controller on rk3399-firefly
  arm64: dts: rockchip: Add rk3328 io-domain node
  arm64: dts: rockchip: kill pcie_clkreqn and pcie_clkreqnb for rk3399
  arm64: dts: rockchip: change clkreq mode for rk3399-firefly
  arm64: dts: rockchip: enable the GPU for RK3399-GRU
  arm64: dts: rockchip: add ARM Mali GPU node for RK3399 SoCs
  dt-bindings: gpu: add the RK3399 mali for rockchip specifics
  arm64: dts: rockchip: remove abused keep-power-in-suspend
  arm64: dts: rockchip: remove num-slots from all platforms
  arm64: dts: rockchip: change clkreq mode for rk3399-evb
  arm64: dts: rockchip: add SdioAudio pd control for rk3399
  arm64: dts: rockchip: enable usb2 for RK3328 evaluation board
  arm64: dts: rockchip: add usb2 nodes for RK3328 SoCs
  arm64: dts: rockchip: set rk3399 dynamic CPU power coefficients
  arm64: dts: rockchip: Use vctrl regulators for dynamic CPU voltages on Gru/Kevin
  arm64: dts: rockchip: Update CPU regulator voltage ranges for Gru
  arm64: dts: rockchip: fix typo in mmc pinctrl
2017-08-16 23:41:03 +02:00

88 lines
2.1 KiB
Plaintext

ARM Mali Midgard GPU
====================
Required properties:
- compatible :
* Must contain one of the following:
+ "arm,mali-t604"
+ "arm,mali-t624"
+ "arm,mali-t628"
+ "arm,mali-t720"
+ "arm,mali-t760"
+ "arm,mali-t820"
+ "arm,mali-t830"
+ "arm,mali-t860"
+ "arm,mali-t880"
* which must be preceded by one of the following vendor specifics:
+ "amlogic,meson-gxm-mali"
+ "rockchip,rk3288-mali"
+ "rockchip,rk3399-mali"
- reg : Physical base address of the device and length of the register area.
- interrupts : Contains the three IRQ lines required by Mali Midgard devices.
- interrupt-names : Contains the names of IRQ resources in the order they were
provided in the interrupts property. Must contain: "job", "mmu", "gpu".
Optional properties:
- clocks : Phandle to clock for the Mali Midgard device.
- mali-supply : Phandle to regulator for the Mali device. Refer to
Documentation/devicetree/bindings/regulator/regulator.txt for details.
- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
for details.
Example for a Mali-T760:
gpu@ffa30000 {
compatible = "rockchip,rk3288-mali", "arm,mali-t760";
reg = <0xffa30000 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
mali-supply = <&vdd_gpu>;
operating-points-v2 = <&gpu_opp_table>;
power-domains = <&power RK3288_PD_GPU>;
};
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp@533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
opp@450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
opp@400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
opp@350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
opp@266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
opp@160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
};