mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
38 lines
1.1 KiB
Plaintext
38 lines
1.1 KiB
Plaintext
NVIDIA Tegra20 SFLASH controller.
|
|
|
|
Required properties:
|
|
- compatible : should be "nvidia,tegra20-sflash".
|
|
- reg: Should contain SFLASH registers location and length.
|
|
- interrupts: Should contain SFLASH interrupts.
|
|
- clocks : Must contain one entry, for the module clock.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names : Must include the following entries:
|
|
- spi
|
|
- dmas : Must contain an entry for each entry in clock-names.
|
|
See ../dma/dma.txt for details.
|
|
- dma-names : Must include the following entries:
|
|
- rx
|
|
- tx
|
|
|
|
Recommended properties:
|
|
- spi-max-frequency: Definition as per
|
|
Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
|
|
Example:
|
|
|
|
spi@7000c380 {
|
|
compatible = "nvidia,tegra20-sflash";
|
|
reg = <0x7000c380 0x80>;
|
|
interrupts = <0 39 0x04>;
|
|
spi-max-frequency = <25000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 43>;
|
|
resets = <&tegra_car 43>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 11>, <&apbdma 11>;
|
|
dma-names = "rx", "tx";
|
|
};
|