mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
2ec3b6287b
Add the devicetree bindings documentation for the Analog Devices axi-spi-engine SPI master peripheral. This is a soft-peripheral used in FPGAs. The external interfaces of the peripheral are: * A memory mapped register map which is used to configure the peripheral. * One interrupt. * Two clocks, one for the memory mapped register interface and one for the SPI bus. * A SPI master interface to which the slave devices are connected. These interfaces are described by the devicetree bindings accordingly. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
32 lines
955 B
Plaintext
32 lines
955 B
Plaintext
Analog Devices AXI SPI Engine controller Device Tree Bindings
|
|
|
|
Required properties:
|
|
- compatible : Must be "adi,axi-spi-engine-1.00.a""
|
|
- reg : Physical base address and size of the register map.
|
|
- interrupts : Property with a value describing the interrupt
|
|
number.
|
|
- clock-names : List of input clock names - "s_axi_aclk", "spi_clk"
|
|
- clocks : Clock phandles and specifiers (See clock bindings for
|
|
details on clock-names and clocks).
|
|
- #address-cells : Must be <1>
|
|
- #size-cells : Must be <0>
|
|
|
|
Optional subnodes:
|
|
Subnodes are use to represent the SPI slave devices connected to the SPI
|
|
master. They follow the generic SPI bindings as outlined in spi-bus.txt.
|
|
|
|
Example:
|
|
|
|
spi@@44a00000 {
|
|
compatible = "adi,axi-spi-engine-1.00.a";
|
|
reg = <0x44a00000 0x1000>;
|
|
interrupts = <0 56 4>;
|
|
clocks = <&clkc 15 &clkc 15>;
|
|
clock-names = "s_axi_aclk", "spi_clk";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* SPI devices */
|
|
};
|