2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/drivers/watchdog/ks8695_wdt.c
Jean Delvare 487722cf2d watchdog: Get rid of MODULE_ALIAS_MISCDEV statements
I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR)
and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements.

Either the device is enumerated and the driver already has a module
alias (e.g. PCI, USB etc.) that will get the right driver loaded
automatically.

Or the device is not enumerated and loading its driver will lead to
more or less intrusive hardware poking. Such hardware poking should be
limited to a bare minimum, so the user should really decide which
drivers should be tried and in what order. Trying them all in
arbitrary order can't do any good.

On top of that, loading that many drivers at once bloats the kernel
log. Also many drivers will stay loaded afterward, bloating the output
of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets
loaded as a dependency) can't even be unloaded!

If defining char-major-10-130 is needed then it should happen in
user-space.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Cc: Jim Cromie <jim.cromie@gmail.com>
2013-11-17 19:38:13 +01:00

327 lines
7.7 KiB
C

/*
* Watchdog driver for Kendin/Micrel KS8695.
*
* (C) 2007 Andrew Victor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <mach/hardware.h>
#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
/*
* Timer registers
*/
#define KS8695_TMCON (0x00) /* Timer Control Register */
#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
/* Timer0 Timeout Counter Register */
#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
#define WDT_DEFAULT_TIME 5 /* seconds */
#define WDT_MAX_TIME 171 /* seconds */
static int wdt_time = WDT_DEFAULT_TIME;
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(wdt_time, int, 0);
MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
__MODULE_STRING(WDT_DEFAULT_TIME) ")");
#ifdef CONFIG_WATCHDOG_NOWAYOUT
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
#endif
static unsigned long ks8695wdt_busy;
static DEFINE_SPINLOCK(ks8695_lock);
/* ......................................................................... */
/*
* Disable the watchdog.
*/
static inline void ks8695_wdt_stop(void)
{
unsigned long tmcon;
spin_lock(&ks8695_lock);
/* disable timer0 */
tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
spin_unlock(&ks8695_lock);
}
/*
* Enable and reset the watchdog.
*/
static inline void ks8695_wdt_start(void)
{
unsigned long tmcon;
unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
spin_lock(&ks8695_lock);
/* disable timer0 */
tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
/* program timer0 */
__raw_writel(tval | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
/* re-enable timer0 */
tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
spin_unlock(&ks8695_lock);
}
/*
* Reload the watchdog timer. (ie, pat the watchdog)
*/
static inline void ks8695_wdt_reload(void)
{
unsigned long tmcon;
spin_lock(&ks8695_lock);
/* disable, then re-enable timer0 */
tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
spin_unlock(&ks8695_lock);
}
/*
* Change the watchdog time interval.
*/
static int ks8695_wdt_settimeout(int new_time)
{
/*
* All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
*
* Since WDV is a 16-bit counter, the maximum period is
* 65536 / 0.256 = 256 seconds.
*/
if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
return -EINVAL;
/* Set new watchdog time. It will be used when
ks8695_wdt_start() is called. */
wdt_time = new_time;
return 0;
}
/* ......................................................................... */
/*
* Watchdog device is opened, and watchdog starts running.
*/
static int ks8695_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &ks8695wdt_busy))
return -EBUSY;
ks8695_wdt_start();
return nonseekable_open(inode, file);
}
/*
* Close the watchdog device.
* If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also
* disabled.
*/
static int ks8695_wdt_close(struct inode *inode, struct file *file)
{
/* Disable the watchdog when file is closed */
if (!nowayout)
ks8695_wdt_stop();
clear_bit(0, &ks8695wdt_busy);
return 0;
}
static const struct watchdog_info ks8695_wdt_info = {
.identity = "ks8695 watchdog",
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
};
/*
* Handle commands from user-space.
*/
static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_value;
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ks8695_wdt_info,
sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_SETOPTIONS:
if (get_user(new_value, p))
return -EFAULT;
if (new_value & WDIOS_DISABLECARD)
ks8695_wdt_stop();
if (new_value & WDIOS_ENABLECARD)
ks8695_wdt_start();
return 0;
case WDIOC_KEEPALIVE:
ks8695_wdt_reload(); /* pat the watchdog */
return 0;
case WDIOC_SETTIMEOUT:
if (get_user(new_value, p))
return -EFAULT;
if (ks8695_wdt_settimeout(new_value))
return -EINVAL;
/* Enable new time value */
ks8695_wdt_start();
/* Return current value */
return put_user(wdt_time, p);
case WDIOC_GETTIMEOUT:
return put_user(wdt_time, p);
default:
return -ENOTTY;
}
}
/*
* Pat the watchdog whenever device is written to.
*/
static ssize_t ks8695_wdt_write(struct file *file, const char *data,
size_t len, loff_t *ppos)
{
ks8695_wdt_reload(); /* pat the watchdog */
return len;
}
/* ......................................................................... */
static const struct file_operations ks8695wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.unlocked_ioctl = ks8695_wdt_ioctl,
.open = ks8695_wdt_open,
.release = ks8695_wdt_close,
.write = ks8695_wdt_write,
};
static struct miscdevice ks8695wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &ks8695wdt_fops,
};
static int ks8695wdt_probe(struct platform_device *pdev)
{
int res;
if (ks8695wdt_miscdev.parent)
return -EBUSY;
ks8695wdt_miscdev.parent = &pdev->dev;
res = misc_register(&ks8695wdt_miscdev);
if (res)
return res;
pr_info("KS8695 Watchdog Timer enabled (%d seconds%s)\n",
wdt_time, nowayout ? ", nowayout" : "");
return 0;
}
static int ks8695wdt_remove(struct platform_device *pdev)
{
int res;
res = misc_deregister(&ks8695wdt_miscdev);
if (!res)
ks8695wdt_miscdev.parent = NULL;
return res;
}
static void ks8695wdt_shutdown(struct platform_device *pdev)
{
ks8695_wdt_stop();
}
#ifdef CONFIG_PM
static int ks8695wdt_suspend(struct platform_device *pdev, pm_message_t message)
{
ks8695_wdt_stop();
return 0;
}
static int ks8695wdt_resume(struct platform_device *pdev)
{
if (ks8695wdt_busy)
ks8695_wdt_start();
return 0;
}
#else
#define ks8695wdt_suspend NULL
#define ks8695wdt_resume NULL
#endif
static struct platform_driver ks8695wdt_driver = {
.probe = ks8695wdt_probe,
.remove = ks8695wdt_remove,
.shutdown = ks8695wdt_shutdown,
.suspend = ks8695wdt_suspend,
.resume = ks8695wdt_resume,
.driver = {
.name = "ks8695_wdt",
.owner = THIS_MODULE,
},
};
static int __init ks8695_wdt_init(void)
{
/* Check that the heartbeat value is within range;
if not reset to the default */
if (ks8695_wdt_settimeout(wdt_time)) {
ks8695_wdt_settimeout(WDT_DEFAULT_TIME);
pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i"
", using %d\n", wdt_time, WDT_MAX_TIME);
}
return platform_driver_register(&ks8695wdt_driver);
}
static void __exit ks8695_wdt_exit(void)
{
platform_driver_unregister(&ks8695wdt_driver);
}
module_init(ks8695_wdt_init);
module_exit(ks8695_wdt_exit);
MODULE_AUTHOR("Andrew Victor");
MODULE_DESCRIPTION("Watchdog driver for KS8695");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ks8695_wdt");