2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
Boris BREZILLON 2df6bb5d8b crypto: marvell/cesa - add DT bindings documentation
Add DT bindings documentation for the new marvell-cesa driver.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-19 22:18:06 +08:00

46 lines
1.6 KiB
Plaintext

Marvell Cryptographic Engines And Security Accelerator
Required properties:
- compatible: should be one of the following string
"marvell,orion-crypto"
"marvell,kirkwood-crypto"
"marvell,dove-crypto"
"marvell,armada-370-crypto"
"marvell,armada-xp-crypto"
"marvell,armada-375-crypto"
"marvell,armada-38x-crypto"
- reg: base physical address of the engine and length of memory mapped
region. Can also contain an entry for the SRAM attached to the CESA,
but this representation is deprecated and marvell,crypto-srams should
be used instead
- reg-names: "regs". Can contain an "sram" entry, but this representation
is deprecated and marvell,crypto-srams should be used instead
- interrupts: interrupt number
- clocks: reference to the crypto engines clocks. This property is not
required for orion and kirkwood platforms
- clock-names: "cesaX" and "cesazX", X should be replaced by the crypto engine
id.
This property is not required for the orion and kirkwoord
platforms.
"cesazX" clocks are not required on armada-370 platforms
- marvell,crypto-srams: phandle to crypto SRAM definitions
Optional properties:
- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not
specified the whole SRAM is used (2KB)
Examples:
crypto@90000 {
compatible = "marvell,armada-xp-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
interrupts = <48>, <49>;
clocks = <&gateclk 23>, <&gateclk 23>;
clock-names = "cesa0", "cesa1";
marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>;
marvell,crypto-sram-size = <0x600>;
status = "okay";
};