mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
fcd0864cdb
Like most clock drivers, the Maxim 77686 PMIC clock binding follows the convention that the "#clock-cells" property is used to specify the number of cells in a clock provider. But the binding document is not clear enough that it shall be set to 1 since the PMIC support multiple clocks outputs. Also, explain that the clocks identifiers are defined in a header file that can be included by Device Tree source with client nodes to avoid using magic numbers. Finally, add "clock-output-names" as an optional property since now is supported by the clock driver. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
47 lines
1.2 KiB
Plaintext
47 lines
1.2 KiB
Plaintext
Binding for Maxim MAX77686 32k clock generator block
|
|
|
|
This is a part of device tree bindings of MAX77686 multi-function device.
|
|
More information can be found in bindings/mfd/max77686.txt file.
|
|
|
|
The MAX77686 contains three 32.768khz clock outputs that can be controlled
|
|
(gated/ungated) over I2C.
|
|
|
|
Following properties should be presend in main device node of the MFD chip.
|
|
|
|
Required properties:
|
|
|
|
- #clock-cells: from common clock binding; shall be set to 1.
|
|
|
|
Optional properties:
|
|
- clock-output-names: From common clock binding.
|
|
|
|
Each clock is assigned an identifier and client nodes can use this identifier
|
|
to specify the clock which they consume. Following indices are allowed:
|
|
- 0: 32khz_ap clock,
|
|
- 1: 32khz_cp clock,
|
|
- 2: 32khz_pmic clock.
|
|
|
|
Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h
|
|
header and can be used in device tree sources.
|
|
|
|
Example: Node of the MFD chip
|
|
|
|
max77686: max77686@09 {
|
|
compatible = "maxim,max77686";
|
|
interrupt-parent = <&wakeup_eint>;
|
|
interrupts = <26 0>;
|
|
reg = <0x09>;
|
|
#clock-cells = <1>;
|
|
|
|
/* ... */
|
|
};
|
|
|
|
Example: Clock consumer node
|
|
|
|
foo@0 {
|
|
compatible = "bar,foo";
|
|
/* ... */
|
|
clock-names = "my-clock";
|
|
clocks = <&max77686 MAX77686_CLK_PMIC>;
|
|
};
|