2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
linux-next/include/asm-alpha/core_lca.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

362 lines
11 KiB
C

#ifndef __ALPHA_LCA__H__
#define __ALPHA_LCA__H__
#include <asm/system.h>
#include <asm/compiler.h>
/*
* Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
* for example).
*
* This file is based on:
*
* DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
* Hardware Reference Manual; Digital Equipment Corp.; May 1994;
* Maynard, MA; Order Number: EC-N2681-71.
*/
/*
* NOTE: The LCA uses a Host Address Extension (HAE) register to access
* PCI addresses that are beyond the first 27 bits of address
* space. Updating the HAE requires an external cycle (and
* a memory barrier), which tends to be slow. Instead of updating
* it on each sparse memory access, we keep the current HAE value
* cached in variable cache_hae. Only if the cached HAE differs
* from the desired HAE value do we actually updated HAE register.
* The HAE register is preserved by the interrupt handler entry/exit
* code, so this scheme works even in the presence of interrupts.
*
* Dense memory space doesn't require the HAE, but is restricted to
* aligned 32 and 64 bit accesses. Special Cycle and Interrupt
* Acknowledge cycles may also require the use of the HAE. The LCA
* limits I/O address space to the bottom 24 bits of address space,
* but this easily covers the 16 bit ISA I/O address space.
*/
/*
* NOTE 2! The memory operations do not set any memory barriers, as
* it's not needed for cases like a frame buffer that is essentially
* memory-like. You need to do them by hand if the operations depend
* on ordering.
*
* Similarly, the port I/O operations do a "mb" only after a write
* operation: if an mb is needed before (as in the case of doing
* memory mapped I/O first, and then a port I/O operation to the same
* device), it needs to be done by hand.
*
* After the above has bitten me 100 times, I'll give up and just do
* the mb all the time, but right now I'm hoping this will work out.
* Avoiding mb's may potentially be a noticeable speed improvement,
* but I can't honestly say I've tested it.
*
* Handling interrupts that need to do mb's to synchronize to
* non-interrupts is another fun race area. Don't do it (because if
* you do, I'll have to do *everything* with interrupts disabled,
* ugh).
*/
/*
* Memory Controller registers:
*/
#define LCA_MEM_BCR0 (IDENT_ADDR + 0x120000000UL)
#define LCA_MEM_BCR1 (IDENT_ADDR + 0x120000008UL)
#define LCA_MEM_BCR2 (IDENT_ADDR + 0x120000010UL)
#define LCA_MEM_BCR3 (IDENT_ADDR + 0x120000018UL)
#define LCA_MEM_BMR0 (IDENT_ADDR + 0x120000020UL)
#define LCA_MEM_BMR1 (IDENT_ADDR + 0x120000028UL)
#define LCA_MEM_BMR2 (IDENT_ADDR + 0x120000030UL)
#define LCA_MEM_BMR3 (IDENT_ADDR + 0x120000038UL)
#define LCA_MEM_BTR0 (IDENT_ADDR + 0x120000040UL)
#define LCA_MEM_BTR1 (IDENT_ADDR + 0x120000048UL)
#define LCA_MEM_BTR2 (IDENT_ADDR + 0x120000050UL)
#define LCA_MEM_BTR3 (IDENT_ADDR + 0x120000058UL)
#define LCA_MEM_GTR (IDENT_ADDR + 0x120000060UL)
#define LCA_MEM_ESR (IDENT_ADDR + 0x120000068UL)
#define LCA_MEM_EAR (IDENT_ADDR + 0x120000070UL)
#define LCA_MEM_CAR (IDENT_ADDR + 0x120000078UL)
#define LCA_MEM_VGR (IDENT_ADDR + 0x120000080UL)
#define LCA_MEM_PLM (IDENT_ADDR + 0x120000088UL)
#define LCA_MEM_FOR (IDENT_ADDR + 0x120000090UL)
/*
* I/O Controller registers:
*/
#define LCA_IOC_HAE (IDENT_ADDR + 0x180000000UL)
#define LCA_IOC_CONF (IDENT_ADDR + 0x180000020UL)
#define LCA_IOC_STAT0 (IDENT_ADDR + 0x180000040UL)
#define LCA_IOC_STAT1 (IDENT_ADDR + 0x180000060UL)
#define LCA_IOC_TBIA (IDENT_ADDR + 0x180000080UL)
#define LCA_IOC_TB_ENA (IDENT_ADDR + 0x1800000a0UL)
#define LCA_IOC_SFT_RST (IDENT_ADDR + 0x1800000c0UL)
#define LCA_IOC_PAR_DIS (IDENT_ADDR + 0x1800000e0UL)
#define LCA_IOC_W_BASE0 (IDENT_ADDR + 0x180000100UL)
#define LCA_IOC_W_BASE1 (IDENT_ADDR + 0x180000120UL)
#define LCA_IOC_W_MASK0 (IDENT_ADDR + 0x180000140UL)
#define LCA_IOC_W_MASK1 (IDENT_ADDR + 0x180000160UL)
#define LCA_IOC_T_BASE0 (IDENT_ADDR + 0x180000180UL)
#define LCA_IOC_T_BASE1 (IDENT_ADDR + 0x1800001a0UL)
#define LCA_IOC_TB_TAG0 (IDENT_ADDR + 0x188000000UL)
#define LCA_IOC_TB_TAG1 (IDENT_ADDR + 0x188000020UL)
#define LCA_IOC_TB_TAG2 (IDENT_ADDR + 0x188000040UL)
#define LCA_IOC_TB_TAG3 (IDENT_ADDR + 0x188000060UL)
#define LCA_IOC_TB_TAG4 (IDENT_ADDR + 0x188000070UL)
#define LCA_IOC_TB_TAG5 (IDENT_ADDR + 0x1880000a0UL)
#define LCA_IOC_TB_TAG6 (IDENT_ADDR + 0x1880000c0UL)
#define LCA_IOC_TB_TAG7 (IDENT_ADDR + 0x1880000e0UL)
/*
* Memory spaces:
*/
#define LCA_IACK_SC (IDENT_ADDR + 0x1a0000000UL)
#define LCA_CONF (IDENT_ADDR + 0x1e0000000UL)
#define LCA_IO (IDENT_ADDR + 0x1c0000000UL)
#define LCA_SPARSE_MEM (IDENT_ADDR + 0x200000000UL)
#define LCA_DENSE_MEM (IDENT_ADDR + 0x300000000UL)
/*
* Bit definitions for I/O Controller status register 0:
*/
#define LCA_IOC_STAT0_CMD 0xf
#define LCA_IOC_STAT0_ERR (1<<4)
#define LCA_IOC_STAT0_LOST (1<<5)
#define LCA_IOC_STAT0_THIT (1<<6)
#define LCA_IOC_STAT0_TREF (1<<7)
#define LCA_IOC_STAT0_CODE_SHIFT 8
#define LCA_IOC_STAT0_CODE_MASK 0x7
#define LCA_IOC_STAT0_P_NBR_SHIFT 13
#define LCA_IOC_STAT0_P_NBR_MASK 0x7ffff
#define LCA_HAE_ADDRESS LCA_IOC_HAE
/* LCA PMR Power Management register defines */
#define LCA_PMR_ADDR (IDENT_ADDR + 0x120000098UL)
#define LCA_PMR_PDIV 0x7 /* Primary clock divisor */
#define LCA_PMR_ODIV 0x38 /* Override clock divisor */
#define LCA_PMR_INTO 0x40 /* Interrupt override */
#define LCA_PMR_DMAO 0x80 /* DMA override */
#define LCA_PMR_OCCEB 0xffff0000L /* Override cycle counter - even bits */
#define LCA_PMR_OCCOB 0xffff000000000000L /* Override cycle counter - even bits */
#define LCA_PMR_PRIMARY_MASK 0xfffffffffffffff8L
/* LCA PMR Macros */
#define LCA_READ_PMR (*(volatile unsigned long *)LCA_PMR_ADDR)
#define LCA_WRITE_PMR(d) (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
#define LCA_GET_PRIMARY(r) ((r) & LCA_PMR_PDIV)
#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
/* LCA PMR Divisor values */
#define LCA_PMR_DIV_1 0x0
#define LCA_PMR_DIV_1_5 0x1
#define LCA_PMR_DIV_2 0x2
#define LCA_PMR_DIV_4 0x3
#define LCA_PMR_DIV_8 0x4
#define LCA_PMR_DIV_16 0x5
#define LCA_PMR_DIV_MIN DIV_1
#define LCA_PMR_DIV_MAX DIV_16
/*
* Data structure for handling LCA machine checks. Correctable errors
* result in a short logout frame, uncorrectable ones in a long one.
*/
struct el_lca_mcheck_short {
struct el_common h; /* common logout header */
unsigned long esr; /* error-status register */
unsigned long ear; /* error-address register */
unsigned long dc_stat; /* dcache status register */
unsigned long ioc_stat0; /* I/O controller status register 0 */
unsigned long ioc_stat1; /* I/O controller status register 1 */
};
struct el_lca_mcheck_long {
struct el_common h; /* common logout header */
unsigned long pt[31]; /* PAL temps */
unsigned long exc_addr; /* exception address */
unsigned long pad1[3];
unsigned long pal_base; /* PALcode base address */
unsigned long hier; /* hw interrupt enable */
unsigned long hirr; /* hw interrupt request */
unsigned long mm_csr; /* MMU control & status */
unsigned long dc_stat; /* data cache status */
unsigned long dc_addr; /* data cache addr register */
unsigned long abox_ctl; /* address box control register */
unsigned long esr; /* error status register */
unsigned long ear; /* error address register */
unsigned long car; /* cache control register */
unsigned long ioc_stat0; /* I/O controller status register 0 */
unsigned long ioc_stat1; /* I/O controller status register 1 */
unsigned long va; /* virtual address register */
};
union el_lca {
struct el_common * c;
struct el_lca_mcheck_long * l;
struct el_lca_mcheck_short * s;
};
#ifdef __KERNEL__
#ifndef __EXTERN_INLINE
#define __EXTERN_INLINE extern inline
#define __IO_EXTERN_INLINE
#endif
/*
* I/O functions:
*
* Unlike Jensen, the Noname machines have no concept of local
* I/O---everything goes over the PCI bus.
*
* There is plenty room for optimization here. In particular,
* the Alpha's insb/insw/extb/extw should be useful in moving
* data to/from the right byte-lanes.
*/
#define vip volatile int __force *
#define vuip volatile unsigned int __force *
#define vulp volatile unsigned long __force *
#define LCA_SET_HAE \
do { \
if (addr >= (1UL << 24)) { \
unsigned long msb = addr & 0xf8000000; \
addr -= msb; \
set_hae(msb); \
} \
} while (0)
__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
unsigned long result, base_and_type;
if (addr >= LCA_DENSE_MEM) {
addr -= LCA_DENSE_MEM;
LCA_SET_HAE;
base_and_type = LCA_SPARSE_MEM + 0x00;
} else {
addr -= LCA_IO;
base_and_type = LCA_IO + 0x00;
}
result = *(vip) ((addr << 5) + base_and_type);
return __kernel_extbl(result, addr & 3);
}
__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
unsigned long w, base_and_type;
if (addr >= LCA_DENSE_MEM) {
addr -= LCA_DENSE_MEM;
LCA_SET_HAE;
base_and_type = LCA_SPARSE_MEM + 0x00;
} else {
addr -= LCA_IO;
base_and_type = LCA_IO + 0x00;
}
w = __kernel_insbl(b, addr & 3);
*(vuip) ((addr << 5) + base_and_type) = w;
}
__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
unsigned long result, base_and_type;
if (addr >= LCA_DENSE_MEM) {
addr -= LCA_DENSE_MEM;
LCA_SET_HAE;
base_and_type = LCA_SPARSE_MEM + 0x08;
} else {
addr -= LCA_IO;
base_and_type = LCA_IO + 0x08;
}
result = *(vip) ((addr << 5) + base_and_type);
return __kernel_extwl(result, addr & 3);
}
__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
unsigned long w, base_and_type;
if (addr >= LCA_DENSE_MEM) {
addr -= LCA_DENSE_MEM;
LCA_SET_HAE;
base_and_type = LCA_SPARSE_MEM + 0x08;
} else {
addr -= LCA_IO;
base_and_type = LCA_IO + 0x08;
}
w = __kernel_inswl(b, addr & 3);
*(vuip) ((addr << 5) + base_and_type) = w;
}
__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
if (addr < LCA_DENSE_MEM)
addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
return *(vuip)addr;
}
__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
if (addr < LCA_DENSE_MEM)
addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
*(vuip)addr = b;
}
__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
{
return (void __iomem *)(addr + LCA_IO);
}
__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
unsigned long size)
{
return (void __iomem *)(addr + LCA_DENSE_MEM);
}
__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
{
return addr >= IDENT_ADDR + 0x120000000UL;
}
__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
{
return (unsigned long)addr >= LCA_DENSE_MEM;
}
#undef vip
#undef vuip
#undef vulp
#undef __IO_PREFIX
#define __IO_PREFIX lca
#define lca_trivial_rw_bw 2
#define lca_trivial_rw_lq 1
#define lca_trivial_io_bw 0
#define lca_trivial_io_lq 0
#define lca_trivial_iounmap 1
#include <asm/io_trivial.h>
#ifdef __IO_EXTERN_INLINE
#undef __EXTERN_INLINE
#undef __IO_EXTERN_INLINE
#endif
#endif /* __KERNEL__ */
#endif /* __ALPHA_LCA__H__ */