renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
Code
c0407a96d0
linux-next/arch/arm/mach-omap2
History
Paul Walmsley c0407a96d0 OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer 
The interface provides device drivers, CPUFreq, and DSPBridge with a
means of controlling OMAP power management parameters that are not yet
supported by the Linux PM PMQoS interface.  Copious documentation is
in the patch in Documentation/arm/OMAP/omap_pm and the interface
header file, arch/arm/plat-omap/include/mach/omap-pm.h.

Thanks to Rajendra Nayak <rnayak@ti.com> for adding CORE (VDD2) OPP
support and moving the OPP table initialization earlier in the event
that the clock code needs them.  Thanks to Tero Kristo
<tero.kristo@nokia.com> for fixing the parameter check in
omap_pm_set_min_bus_tput().  Jouni signed off on Tero's patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Jouni Högander <jouni.hogander@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Igor Stoppa <igor.stoppa@nokia.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Veeramanikandan Raju <veera@ti.com>
Cc: Karthik Dasu <karthik-dp@ti.com>
2009-09-03 20:14:01 +03:00
..
board-2430sdp.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-3430sdp.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-4430sdp.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-apollon.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-generic.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-h4.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-ldp.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-n8x0.c OMAP2: add board file for Nokia N800 and N810 2009-08-28 10:51:38 -07:00
board-omap3beagle.c OMAP3: beagle: add missing twl4030 usb platform_data 2009-08-28 11:24:15 -07:00
board-omap3evm.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-omap3pandora.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-overo.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-rx51-peripherals.c OMAP3: RX51: Define TWL4030 USB transceiver in board file 2009-08-10 14:49:51 +03:00
board-rx51.c OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle 2009-08-28 10:51:31 -07:00
board-zoom2.c OMAP3: Zoom2: Add TWL4030 support 2009-08-28 11:24:13 -07:00
board-zoom-debugboard.c OMAP2/3: Pass irqflags to 8250 driver 2009-08-28 11:24:08 -07:00
clock24xx.c OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register 2009-07-24 20:10:36 -06:00
clock24xx.h OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register 2009-07-24 20:10:36 -06:00
clock34xx.c OMAP3 clock: Fixed processing of bootarg 'mpurate' 2009-09-03 20:13:58 +03:00
clock34xx.h OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm 2009-09-03 20:14:00 +03:00
clock.c OMAP2/3 clock: split, rename omap2_wait_clock_ready() 2009-07-24 20:10:35 -06:00
clock.h OMAP2/3 clock: split, rename omap2_wait_clock_ready() 2009-07-24 20:10:35 -06:00
clockdomain.c [ARM] omap: ensure that failing power domain lookups produce errors 2009-02-23 14:55:34 +00:00
clockdomains.h OMAP3: PM: D2D clockdomain supports SW supervised transitions 2009-05-28 10:59:08 -07:00
cm-regbits-24xx.h [ARM] OMAP2 PRCM: clean up CM_IDLEST bits 2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init 2009-05-28 10:59:07 -07:00
cm.h OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
control.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
devices.c OMAP3: MMC: Add mux for pins 2009-08-28 11:24:11 -07:00
gpmc-onenand.c OMAP2/3: gpmc-onenand: correct use of async timings 2009-06-23 13:30:24 +03:00
gpmc-smc91x.c ARM: OMAP2/3: Add generic smc91x support when connected to GPMC 2009-05-28 13:23:52 -07:00
gpmc.c ARM: OMAP4: Add minimal support for omap4 2009-05-28 14:16:04 -07:00
id.c OMAP2/3: Add omap_type() for determining GP/EMU/HS 2009-06-23 13:30:23 +03:00
io.c OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer 2009-09-03 20:14:01 +03:00
iommu2.c OMAP: iommu: add initial debugfs support 2009-08-28 10:54:41 -07:00
irq.c OMAP: Add new function to check wether there is irq pending 2009-05-28 10:59:04 -07:00
Kconfig OMAP2: add board file for Nokia N800 and N810 2009-08-28 10:51:38 -07:00
mailbox.c OMAP2/3: omap mailbox: platform_get_irq() error ignored 2009-06-23 13:30:22 +03:00
Makefile OMAP2: add board file for Nokia N800 and N810 2009-08-28 10:51:38 -07:00
Makefile.boot [ARM] 3145/1: OMAP 3a/5: Add support for omap24xx 2005-11-10 14:26:51 +00:00
mcbsp.c ARM: includecheck fix: mach-omap2/mcbsp.c 2009-07-25 17:08:23 +01:00
mmc-twl4030.c OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up 2009-08-10 14:49:51 +03:00
mmc-twl4030.h ARM: OMAP3: mmc-twl4030 uses regulator framework 2009-05-28 14:04:03 -07:00
mux.c OMAP3: MMC: Add mux for pins 2009-08-28 11:24:11 -07:00
omap3-iommu.c omap iommu: add MPU_BRIDGE_IOMMU for tidspbridge migration 2009-05-22 10:17:02 +03:00
omap-headsmp.S ARM: OMAP4: SMP: Add OMAP4430 SMP board files 2009-06-09 13:03:50 +05:30
omap-smp.c OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
pm24xx.c OMAP2/3: PM: make PM __init calls static 2009-08-05 09:10:50 -07:00
pm34xx.c OMAP3: PM: Fix wrong sequence in suspend. 2009-08-05 09:10:54 -07:00
pm-debug.c OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
pm.h OMAP2/3: PM: make PM __init calls static 2009-08-05 09:10:50 -07:00
powerdomain.c OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups. 2009-09-03 20:13:53 +03:00
powerdomains24xx.h ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains 2008-08-19 11:08:42 +03:00
powerdomains34xx.h [ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond 2009-02-23 14:52:51 +00:00
powerdomains.h [ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond 2009-02-23 14:52:51 +00:00
prcm-common.h OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
prcm.c OMAP2/3 clock: split, rename omap2_wait_clock_ready() 2009-07-24 20:10:35 -06:00
prm-regbits-24xx.h ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains 2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h ARM: OMAP3: Fix HW SAVEANDRESTORE shift define 2009-05-16 08:28:17 -07:00
prm.h OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
sdram-micron-mt46h32m32lf-6.h ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2 2009-05-28 14:03:59 -07:00
sdram-qimonda-hyb18m512160af-6.h ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6 2009-05-28 14:03:59 -07:00
sdrc2xxx.c ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE 2009-05-25 11:26:42 -07:00
sdrc.c OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot 2009-07-24 19:44:01 -06:00
sdrc.h OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
serial.c OMAP2/3: Pass irqflags to 8250 driver 2009-08-28 11:24:08 -07:00
sleep24xx.S OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
sleep34xx.S OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
sram34xx.S OMAP3 SDRC: Move the clk stabilization delay to the right place 2009-07-24 20:10:35 -06:00
sram242x.S OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
sram243x.S OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
timer-gp.c OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
timer-mpu.c ARM: OMAP4: SMP: Add mpu timer support for OMAP4430 2009-06-09 13:03:59 +05:30
usb-musb.c USB: musb: fix the nop registration for OMAP3EVM 2009-08-07 16:05:13 -07:00
usb-tusb6010.c ARM: OMAP2: Fix tusb6010 init error and compilation warning 2009-05-12 11:20:02 -07:00