mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
d1ff70241a
When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
161 lines
5.9 KiB
Plaintext
161 lines
5.9 KiB
Plaintext
What: /sys/bus/thunderbolt/devices/.../domainX/security
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This attribute holds current Thunderbolt security level
|
|
set by the system BIOS. Possible values are:
|
|
|
|
none: All devices are automatically authorized
|
|
user: Devices are only authorized based on writing
|
|
appropriate value to the authorized attribute
|
|
secure: Require devices that support secure connect at
|
|
minimum. User needs to authorize each device.
|
|
dponly: Automatically tunnel Display port (and USB). No
|
|
PCIe tunnels are created.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../authorized
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This attribute is used to authorize Thunderbolt devices
|
|
after they have been connected. If the device is not
|
|
authorized, no devices such as PCIe and Display port are
|
|
available to the system.
|
|
|
|
Contents of this attribute will be 0 when the device is not
|
|
yet authorized.
|
|
|
|
Possible values are supported:
|
|
1: The device will be authorized and connected
|
|
|
|
When key attribute contains 32 byte hex string the possible
|
|
values are:
|
|
1: The 32 byte hex string is added to the device NVM and
|
|
the device is authorized.
|
|
2: Send a challenge based on the 32 byte hex string. If the
|
|
challenge response from device is valid, the device is
|
|
authorized. In case of failure errno will be ENOKEY if
|
|
the device did not contain a key at all, and
|
|
EKEYREJECTED if the challenge response did not match.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../key
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: When a devices supports Thunderbolt secure connect it will
|
|
have this attribute. Writing 32 byte hex string changes
|
|
authorization to use the secure connection method instead.
|
|
Writing an empty string clears the key and regular connection
|
|
method can be used again.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../device
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This attribute contains id of this device extracted from
|
|
the device DROM.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../device_name
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This attribute contains name of this device extracted from
|
|
the device DROM.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../vendor
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This attribute contains vendor id of this device extracted
|
|
from the device DROM.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../vendor_name
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This attribute contains vendor name of this device extracted
|
|
from the device DROM.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../unique_id
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This attribute contains unique_id string of this device.
|
|
This is either read from hardware registers (UUID on
|
|
newer hardware) or based on UID from the device DROM.
|
|
Can be used to uniquely identify particular device.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../nvm_version
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: If the device has upgradeable firmware the version
|
|
number is available here. Format: %x.%x, major.minor.
|
|
If the device is in safe mode reading the file returns
|
|
-ENODATA instead as the NVM version is not available.
|
|
|
|
What: /sys/bus/thunderbolt/devices/.../nvm_authenticate
|
|
Date: Sep 2017
|
|
KernelVersion: 4.13
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: When new NVM image is written to the non-active NVM
|
|
area (through non_activeX NVMem device), the
|
|
authentication procedure is started by writing 1 to
|
|
this file. If everything goes well, the device is
|
|
restarted with the new NVM firmware. If the image
|
|
verification fails an error code is returned instead.
|
|
|
|
When read holds status of the last authentication
|
|
operation if an error occurred during the process. This
|
|
is directly the status value from the DMA configuration
|
|
based mailbox before the device is power cycled. Writing
|
|
0 here clears the status.
|
|
|
|
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/key
|
|
Date: Jan 2018
|
|
KernelVersion: 4.15
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This contains name of the property directory the XDomain
|
|
service exposes. This entry describes the protocol in
|
|
question. Following directories are already reserved by
|
|
the Apple XDomain specification:
|
|
|
|
network: IP/ethernet over Thunderbolt
|
|
targetdm: Target disk mode protocol over Thunderbolt
|
|
extdisp: External display mode protocol over Thunderbolt
|
|
|
|
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias
|
|
Date: Jan 2018
|
|
KernelVersion: 4.15
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: Stores the same MODALIAS value emitted by uevent for
|
|
the XDomain service. Format: tbtsvc:kSpNvNrN
|
|
|
|
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcid
|
|
Date: Jan 2018
|
|
KernelVersion: 4.15
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This contains XDomain protocol identifier the XDomain
|
|
service supports.
|
|
|
|
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcvers
|
|
Date: Jan 2018
|
|
KernelVersion: 4.15
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This contains XDomain protocol version the XDomain
|
|
service supports.
|
|
|
|
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcrevs
|
|
Date: Jan 2018
|
|
KernelVersion: 4.15
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This contains XDomain software version the XDomain
|
|
service supports.
|
|
|
|
What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcstns
|
|
Date: Jan 2018
|
|
KernelVersion: 4.15
|
|
Contact: thunderbolt-software@lists.01.org
|
|
Description: This contains XDomain service specific settings as
|
|
bitmask. Format: %x
|