2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/drivers/iio
Tomas Novotny be38866fbb iio: vcnl4000: add support for VCNL4200
VCNL4200 is an integrated long distance (up to 1500mm) proximity and
ambient light sensor.

The support is very basic. There is no configuration of proximity and
ambient light sensing yet. Only the reading of both measured values is
done.

The reading of ambient light and proximity values is blocking. If you
request a new value too early, the driver waits for new value to be
ready.

Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-29 12:19:28 +01:00
..
accel Second set of IIO new device support, features and cleanups. 2018-07-25 10:12:07 +02:00
adc iio: ad_sigma_delta: use unsigned long for timeout 2018-07-28 12:15:03 +01:00
afe iio: afe: rescale: new driver 2018-04-28 18:03:22 +01:00
amplifiers iio: amplifiers: ad8366: move channel init before iio_device_register() 2018-05-22 18:13:45 +01:00
buffer iio:kfifo_buf: check for uint overflow 2018-03-30 11:16:12 +01:00
chemical iio: chemical: Add support for Bosch BME680 sensor 2018-07-28 11:38:46 +01:00
common iio: change strncpy+truncation to strlcpy 2018-07-15 11:38:06 +01:00
counter iio: 104-quad-8: Provide defines for magic numbers 2018-06-10 11:52:30 +01:00
dac iio: dac: Add AD5758 support 2018-07-07 18:16:32 +01:00
dummy iio:dummy: Add extra paragraphs on Kconfig 2018-03-03 15:20:16 +00:00
frequency iio: ad9523: support for external signals via gpios 2018-07-28 10:41:14 +01:00
gyro iio: Replace occurrences of magic number 0 by IIO_CHAN_INFO_RAW 2018-03-07 20:14:36 +00:00
health iio: add SPDX identifier for various drivers 2018-02-18 11:55:19 +00:00
humidity iio: add SPDX identifier for various drivers 2018-02-18 11:55:19 +00:00
imu Second set of IIO new device support, features and cleanups. 2018-07-25 10:12:07 +02:00
light iio: vcnl4000: add support for VCNL4200 2018-07-29 12:19:28 +01:00
magnetometer iio: magnetometer: mag3110: Add ability to run in continuous mode 2018-05-12 11:01:59 +01:00
multiplexer treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
orientation iio:orientation: drop assign iio_info.driver_module 2017-08-22 21:33:36 +01:00
potentiometer iio: potentiometer: mcp4531: switch to using .probe_new 2018-04-15 18:12:51 +01:00
potentiostat iio: potentiostat: lmp91000: add LMP91002 support 2018-05-12 11:02:44 +01:00
pressure Second set of IIO new device support, features and cleanups. 2018-07-25 10:12:07 +02:00
proximity iio: light: isl29501: Add support for the ISL29501 ToF sensor. 2018-07-23 19:18:10 +01:00
resolver staging: iio: ad2s1200: Move driver out of staging 2018-05-20 12:17:48 +01:00
temperature iio temperature/mlx90632: silence a static checker warning 2018-02-24 13:32:05 +00:00
trigger iio: stm32: Adopt SPDX identifier 2018-01-08 16:03:41 +01:00
iio_core_trigger.h
iio_core.h the rest of drivers/*: annotate ->poll() instances 2017-11-28 11:06:58 -05:00
industrialio-buffer.c First round of IIO fixes for the 4.16 cycle. 2018-02-20 10:03:22 +01:00
industrialio-configfs.c iio: make function argument and some structures const 2017-10-19 16:15:24 +02:00
industrialio-core.c iio: Add modifier for DUV light 2018-07-23 19:18:10 +01:00
industrialio-event.c vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
industrialio-sw-device.c iio: make function argument and some structures const 2017-10-19 16:15:24 +02:00
industrialio-sw-trigger.c iio: make function argument and some structures const 2017-10-19 16:15:24 +02:00
industrialio-trigger.c iio:trigger: Remove necessity to have a trig->ops structure. 2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c
inkern.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
Kconfig staging: iio: ad2s1200: Move driver out of staging 2018-05-20 12:17:48 +01:00
Makefile staging: iio: ad2s1200: Move driver out of staging 2018-05-20 12:17:48 +01:00