2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 22:24:09 +08:00
linux-next/drivers/irqchip/irq-versatile-fpga.c
Thomas Gleixner bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00

231 lines
5.8 KiB
C

/*
* Support for Versatile FPGA-based IRQ controllers
*/
#include <linux/bitops.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/irqchip/versatile-fpga.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
#define IRQ_STATUS 0x00
#define IRQ_RAW_STATUS 0x04
#define IRQ_ENABLE_SET 0x08
#define IRQ_ENABLE_CLEAR 0x0c
#define INT_SOFT_SET 0x10
#define INT_SOFT_CLEAR 0x14
#define FIQ_STATUS 0x20
#define FIQ_RAW_STATUS 0x24
#define FIQ_ENABLE 0x28
#define FIQ_ENABLE_SET 0x28
#define FIQ_ENABLE_CLEAR 0x2C
#define PIC_ENABLES 0x20 /* set interrupt pass through bits */
/**
* struct fpga_irq_data - irq data container for the FPGA IRQ controller
* @base: memory offset in virtual memory
* @chip: chip container for this instance
* @domain: IRQ domain for this instance
* @valid: mask for valid IRQs on this controller
* @used_irqs: number of active IRQs on this controller
*/
struct fpga_irq_data {
void __iomem *base;
struct irq_chip chip;
u32 valid;
struct irq_domain *domain;
u8 used_irqs;
};
/* we cannot allocate memory when the controllers are initially registered */
static struct fpga_irq_data fpga_irq_devices[CONFIG_VERSATILE_FPGA_IRQ_NR];
static int fpga_irq_id;
static void fpga_irq_mask(struct irq_data *d)
{
struct fpga_irq_data *f = irq_data_get_irq_chip_data(d);
u32 mask = 1 << d->hwirq;
writel(mask, f->base + IRQ_ENABLE_CLEAR);
}
static void fpga_irq_unmask(struct irq_data *d)
{
struct fpga_irq_data *f = irq_data_get_irq_chip_data(d);
u32 mask = 1 << d->hwirq;
writel(mask, f->base + IRQ_ENABLE_SET);
}
static void fpga_irq_handle(struct irq_desc *desc)
{
struct fpga_irq_data *f = irq_desc_get_handler_data(desc);
u32 status = readl(f->base + IRQ_STATUS);
if (status == 0) {
do_bad_IRQ(desc);
return;
}
do {
unsigned int irq = ffs(status) - 1;
status &= ~(1 << irq);
generic_handle_irq(irq_find_mapping(f->domain, irq));
} while (status);
}
/*
* Handle each interrupt in a single FPGA IRQ controller. Returns non-zero
* if we've handled at least one interrupt. This does a single read of the
* status register and handles all interrupts in order from LSB first.
*/
static int handle_one_fpga(struct fpga_irq_data *f, struct pt_regs *regs)
{
int handled = 0;
int irq;
u32 status;
while ((status = readl(f->base + IRQ_STATUS))) {
irq = ffs(status) - 1;
handle_domain_irq(f->domain, irq, regs);
handled = 1;
}
return handled;
}
/*
* Keep iterating over all registered FPGA IRQ controllers until there are
* no pending interrupts.
*/
asmlinkage void __exception_irq_entry fpga_handle_irq(struct pt_regs *regs)
{
int i, handled;
do {
for (i = 0, handled = 0; i < fpga_irq_id; ++i)
handled |= handle_one_fpga(&fpga_irq_devices[i], regs);
} while (handled);
}
static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct fpga_irq_data *f = d->host_data;
/* Skip invalid IRQs, only register handlers for the real ones */
if (!(f->valid & BIT(hwirq)))
return -EPERM;
irq_set_chip_data(irq, f);
irq_set_chip_and_handler(irq, &f->chip,
handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
return 0;
}
static const struct irq_domain_ops fpga_irqdomain_ops = {
.map = fpga_irqdomain_map,
.xlate = irq_domain_xlate_onetwocell,
};
void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start,
int parent_irq, u32 valid, struct device_node *node)
{
struct fpga_irq_data *f;
int i;
if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) {
pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_VERSATILE_FPGA_IRQ_NR\n", __func__);
return;
}
f = &fpga_irq_devices[fpga_irq_id];
f->base = base;
f->chip.name = name;
f->chip.irq_ack = fpga_irq_mask;
f->chip.irq_mask = fpga_irq_mask;
f->chip.irq_unmask = fpga_irq_unmask;
f->valid = valid;
if (parent_irq != -1) {
irq_set_chained_handler_and_data(parent_irq, fpga_irq_handle,
f);
}
/* This will also allocate irq descriptors */
f->domain = irq_domain_add_simple(node, fls(valid), irq_start,
&fpga_irqdomain_ops, f);
/* This will allocate all valid descriptors in the linear case */
for (i = 0; i < fls(valid); i++)
if (valid & BIT(i)) {
if (!irq_start)
irq_create_mapping(f->domain, i);
f->used_irqs++;
}
pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs",
fpga_irq_id, name, base, f->used_irqs);
if (parent_irq != -1)
pr_cont(", parent IRQ: %d\n", parent_irq);
else
pr_cont("\n");
fpga_irq_id++;
}
#ifdef CONFIG_OF
int __init fpga_irq_of_init(struct device_node *node,
struct device_node *parent)
{
void __iomem *base;
u32 clear_mask;
u32 valid_mask;
int parent_irq;
if (WARN_ON(!node))
return -ENODEV;
base = of_iomap(node, 0);
WARN(!base, "unable to map fpga irq registers\n");
if (of_property_read_u32(node, "clear-mask", &clear_mask))
clear_mask = 0;
if (of_property_read_u32(node, "valid-mask", &valid_mask))
valid_mask = 0;
/* Some chips are cascaded from a parent IRQ */
parent_irq = irq_of_parse_and_map(node, 0);
if (!parent_irq) {
set_handle_irq(fpga_handle_irq);
parent_irq = -1;
}
fpga_irq_init(base, node->name, 0, parent_irq, valid_mask, node);
writel(clear_mask, base + IRQ_ENABLE_CLEAR);
writel(clear_mask, base + FIQ_ENABLE_CLEAR);
/*
* On Versatile AB/PB, some secondary interrupts have a direct
* pass-thru to the primary controller for IRQs 20 and 22-31 which need
* to be enabled. See section 3.10 of the Versatile AB user guide.
*/
if (of_device_is_compatible(node, "arm,versatile-sic"))
writel(0xffd00000, base + PIC_ENABLES);
return 0;
}
IRQCHIP_DECLARE(arm_fpga, "arm,versatile-fpga-irq", fpga_irq_of_init);
IRQCHIP_DECLARE(arm_fpga_sic, "arm,versatile-sic", fpga_irq_of_init);
#endif