Anton Vorontsov bc2fd1c09c [ARM] pxa: add basic support for HP iPAQ h5000 ... This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions. Kernel will able to boot, work via serial console, mount filesystems placed on flashes and run USB gadgets (g_ether by default). Other device drivers (frame buffer, LCD, touchscreen, backlight, bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ SoCs/MFDs, drivers to which will be submitted too, after massive cleanups. This machine will be used as "real user" for these new drivers. This is an updated version of the patch, which contains fixes proposed on linux-arm-kernel mailing list. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>		2008-12-02 14:43:50 +08:00
..
audio.h
bitfield.h
camera.h	V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver	2008-10-12 09:36:50 -02:00
colibri.h
corgi.h	Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"	2008-10-21 09:42:29 +08:00
debug-macro.S
dma.h
entry-macro.S	[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15	2008-09-01 17:13:26 +01:00
eseries-gpio.h
eseries-irq.h
gpio.h
gumstix.h
h5000.h	[ARM] pxa: add basic support for HP iPAQ h5000	2008-12-02 14:43:50 +08:00
hardware.h	[ARM] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx()	2008-12-02 14:42:40 +08:00
i2c.h	[ARM] 5278/1: i2c-pxa fast mode support	2008-10-03 15:57:06 +01:00
idp.h
io.h
irda.h
irqs.h	[ARM] pxa: fix redefinition of NR_IRQS	2008-10-17 13:19:08 +01:00
littleton.h	[ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driver	2008-09-23 22:04:38 +01:00
lpd270.h
lubbock.h
magician.h
mainstone.h
memory.h	[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255	2008-10-07 12:05:05 +01:00
mfp-pxa2xx.h
mfp-pxa3xx.h
mfp-pxa25x.h	[ARM] pxa: add support for additional GPIOs on PXA26x	2008-12-02 14:42:37 +08:00
mfp-pxa27x.h	[ARM] pxa: add missing GPIOs definitions	2008-12-02 14:42:41 +08:00
mfp-pxa300.h
mfp-pxa320.h	[ARM] pxa: fix incorrect definitions of SSP3 on pxa320	2008-08-26 17:02:00 +01:00
mfp-pxa930.h
mfp.h	[ARM] pxa: better MFP low power state support for pxa25x/pxa27x	2008-09-26 23:43:20 +01:00
mioa701.h	[ARM] pxa/MioA701: discovered new gpio definitions.	2008-12-02 14:43:48 +08:00
mmc.h
mtd-xip.h	[ARM] 5191/1: ARM: remove CVS keywords	2008-08-16 20:01:18 +01:00
ohci.h	[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers	2008-10-07 19:12:57 +01:00
palmtx.h
palmz72.h	[ARM] 5239/1: Palm Zire 72 power management support	2008-10-09 15:12:07 +01:00
pcm027.h
pcm990_baseboard.h
pm.h	[ARM] pxa: Allow platforms to override PSPR setting	2008-09-09 16:32:52 +01:00
poodle.h	[ARM] pxa/poodle: prepare scoop for the generic GPIO API	2008-09-23 22:04:38 +01:00
pxa2xx_spi.h
pxa2xx-gpio.h	[ARM] pxa: removed unused declarations of pxa_gpio_* in hardware.h	2008-12-02 14:42:37 +08:00
pxa2xx-regs.h	[ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support	2008-12-02 14:43:47 +08:00
pxa3xx_nand.h	[MTD] [NAND] pxa3xx_nand: moved some helper variables out from platform data	2008-09-01 21:38:34 +01:00
pxa3xx-regs.h	[ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h	2008-10-07 19:12:59 +01:00
pxa25x-udc.h
pxa27x_keypad.h
pxa27x-udc.h
pxa-regs.h	[ARM] pxa: include <mach/hardware.h> in pxa-regs.h	2008-12-02 14:42:39 +08:00
pxafb.h	pxafb: introduce LCD_TYPE_MASK and use it.	2008-11-11 21:45:57 +08:00
regs-ac97.h	[ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h	2008-12-02 14:42:39 +08:00
regs-lcd.h
regs-ssp.h
regs-uart.h	[ARM] pxa: move UART register definitions into dedicated regs-uart.h	2008-12-02 14:42:38 +08:00
reset.h	[ARM] 5300/1: fixup spitz reset during boot	2008-10-11 09:52:38 +01:00
sharpsl.h	[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl	2008-10-29 11:45:37 +08:00
spitz.h	[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h	2008-10-21 22:45:57 +08:00
ssp.h	[ARM] 5224/2: PXA SSP: Introduce register accessors	2008-09-09 16:32:52 +01:00
system.h
timex.h
tosa_bt.h
tosa.h	backlight: add support for Sharp SL-6000 LCD and backlight drivers	2008-10-21 00:19:49 +01:00
trizeps4.h	[ARM] 5204/1: Trizeps4 SOM update	2008-10-01 22:33:11 +01:00
udc.h
uncompress.h	[ARM] pxa: move UART register definitions into dedicated regs-uart.h	2008-12-02 14:42:38 +08:00
viper.h	Basic support for the Arcom/Eurotech Viper SBC.	2008-09-09 17:41:46 +02:00
vmalloc.h
zylonite.h	misc: replace remaining __FUNCTION__ with __func__	2008-10-20 16:17:42 -07:00