renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 23:23:55 +08:00
Code
bbd47e2720
linux-next/arch/arm/boot/dts/rk3066a.dtsi
Heiko Stuebner 07f08d9cee ARM: dts: rockchip: bulk convert gpios to their constant counterparts 
Rockchip SoCs use 2 different numbering schemes. Where the gpio-
controllers just count 0-31 for their 32 gpios, the underlying
iomux controller splits these into 4 separate entities A-D.

Device-schematics always use these iomux-values to identify pins,
so to make mapping schematics to devicetree easier Andy Yan introduced
named constants for the pins but so far we only used them on new
additions.

Using a sed-script created by Emil Renner Berthing bulk-convert
the remaining raw gpio numbers into their descriptive counterparts
and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings:

/rockchip,pins *=/bcheck
b # to end of script
:append-next-line
N
:check
/^[^;]*$/bappend-next-line
s/<RK_GPIO\([0-9]\) /<\1 /g
s/<\([^ ][^ ]*  *\)0 /<\1RK_PA0 /g
s/<\([^ ][^ ]*  *\)1 /<\1RK_PA1 /g
s/<\([^ ][^ ]*  *\)2 /<\1RK_PA2 /g
s/<\([^ ][^ ]*  *\)3 /<\1RK_PA3 /g
s/<\([^ ][^ ]*  *\)4 /<\1RK_PA4 /g
s/<\([^ ][^ ]*  *\)5 /<\1RK_PA5 /g
s/<\([^ ][^ ]*  *\)6 /<\1RK_PA6 /g
s/<\([^ ][^ ]*  *\)7 /<\1RK_PA7 /g
s/<\([^ ][^ ]*  *\)8 /<\1RK_PB0 /g
s/<\([^ ][^ ]*  *\)9 /<\1RK_PB1 /g
s/<\([^ ][^ ]*  *\)10 /<\1RK_PB2 /g
s/<\([^ ][^ ]*  *\)11 /<\1RK_PB3 /g
s/<\([^ ][^ ]*  *\)12 /<\1RK_PB4 /g
s/<\([^ ][^ ]*  *\)13 /<\1RK_PB5 /g
s/<\([^ ][^ ]*  *\)14 /<\1RK_PB6 /g
s/<\([^ ][^ ]*  *\)15 /<\1RK_PB7 /g
s/<\([^ ][^ ]*  *\)16 /<\1RK_PC0 /g
s/<\([^ ][^ ]*  *\)17 /<\1RK_PC1 /g
s/<\([^ ][^ ]*  *\)18 /<\1RK_PC2 /g
s/<\([^ ][^ ]*  *\)19 /<\1RK_PC3 /g
s/<\([^ ][^ ]*  *\)20 /<\1RK_PC4 /g
s/<\([^ ][^ ]*  *\)21 /<\1RK_PC5 /g
s/<\([^ ][^ ]*  *\)22 /<\1RK_PC6 /g
s/<\([^ ][^ ]*  *\)23 /<\1RK_PC7 /g
s/<\([^ ][^ ]*  *\)24 /<\1RK_PD0 /g
s/<\([^ ][^ ]*  *\)25 /<\1RK_PD1 /g
s/<\([^ ][^ ]*  *\)26 /<\1RK_PD2 /g
s/<\([^ ][^ ]*  *\)27 /<\1RK_PD3 /g
s/<\([^ ][^ ]*  *\)28 /<\1RK_PD4 /g
s/<\([^ ][^ ]*  *\)29 /<\1RK_PD5 /g
s/<\([^ ][^ ]*  *\)30 /<\1RK_PD6 /g
s/<\([^ ][^ ]*  *\)31 /<\1RK_PD7 /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)0 /<\1RK_FUNC_GPIO /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)RK_FUNC_\([1-9]\) /<\1\2 /g

Suggested-by: Emil Renner Berthing <esmil@mailme.dk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11 14:38:26 +02:00

877 lines
19 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3066a-cru.h>
#include <dt-bindings/power/rk3066-power.h>
#include "rk3xxx.dtsi"
/ {
compatible = "rockchip,rk3066a";
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
operating-points = <
/* kHz uV */
1416000 1300000
1200000 1175000
1008000 1125000
816000 1125000
600000 1100000
504000 1100000
312000 1075000
>;
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x1>;
};
};
display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vop0_out>, <&vop1_out>;
};
sram: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x10080000 0x10000>;
smp-sram@0 {
compatible = "rockchip,rk3066-smp-sram";
reg = <0x0 0x50>;
};
};
vop0: vop@1010c000 {
compatible = "rockchip,rk3066-vop";
reg = <0x1010c000 0x19c>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_LCDC0>,
<&cru DCLK_LCDC0>,
<&cru HCLK_LCDC0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
power-domains = <&power RK3066_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>,
<&cru SRST_LCDC0_AHB>,
<&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
status = "disabled";
vop0_out: port {
#address-cells = <1>;
#size-cells = <0>;
vop0_out_hdmi: endpoint@0 {
reg = <0>;
remote-endpoint = <&hdmi_in_vop0>;
};
};
};
vop1: vop@1010e000 {
compatible = "rockchip,rk3066-vop";
reg = <0x1010e000 0x19c>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_LCDC1>,
<&cru DCLK_LCDC1>,
<&cru HCLK_LCDC1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
power-domains = <&power RK3066_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>,
<&cru SRST_LCDC1_AHB>,
<&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
status = "disabled";
vop1_out: port {
#address-cells = <1>;
#size-cells = <0>;
vop1_out_hdmi: endpoint@0 {
reg = <0>;
remote-endpoint = <&hdmi_in_vop1>;
};
};
};
hdmi: hdmi@10116000 {
compatible = "rockchip,rk3066-hdmi";
reg = <0x10116000 0x2000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HDMI>;
clock-names = "hclk";
pinctrl-names = "default";
pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
power-domains = <&power RK3066_PD_VIO>;
rockchip,grf = <&grf>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
hdmi_in_vop0: endpoint@0 {
reg = <0>;
remote-endpoint = <&vop0_out_hdmi>;
};
hdmi_in_vop1: endpoint@1 {
reg = <1>;
remote-endpoint = <&vop1_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
i2s0: i2s@10118000 {
compatible = "rockchip,rk3066-i2s";
reg = <0x10118000 0x2000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
dmas = <&dmac1_s 4>, <&dmac1_s 5>;
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
rockchip,playback-channels = <8>;
rockchip,capture-channels = <2>;
#sound-dai-cells = <0>;
status = "disabled";
};
i2s1: i2s@1011a000 {
compatible = "rockchip,rk3066-i2s";
reg = <0x1011a000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
dmas = <&dmac1_s 6>, <&dmac1_s 7>;
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
rockchip,playback-channels = <2>;
rockchip,capture-channels = <2>;
#sound-dai-cells = <0>;
status = "disabled";
};
i2s2: i2s@1011c000 {
compatible = "rockchip,rk3066-i2s";
reg = <0x1011c000 0x2000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
dmas = <&dmac1_s 9>, <&dmac1_s 10>;
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
rockchip,playback-channels = <2>;
rockchip,capture-channels = <2>;
#sound-dai-cells = <0>;
status = "disabled";
};
cru: clock-controller@20000000 {
compatible = "rockchip,rk3066a-cru";
reg = <0x20000000 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
<&cru ACLK_CPU>, <&cru HCLK_CPU>,
<&cru PCLK_CPU>, <&cru ACLK_PERI>,
<&cru HCLK_PERI>, <&cru PCLK_PERI>;
assigned-clock-rates = <400000000>, <594000000>,
<300000000>, <150000000>,
<75000000>, <300000000>,
<150000000>, <75000000>;
};
timer@2000e000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2000e000 0x100>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
clock-names = "timer", "pclk";
};
efuse: efuse@20010000 {
compatible = "rockchip,rk3066a-efuse";
reg = <0x20010000 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&cru PCLK_EFUSE>;
clock-names = "pclk_efuse";
cpu_leakage: cpu_leakage@17 {
reg = <0x17 0x1>;
};
};
timer@20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
clock-names = "timer", "pclk";
};
timer@2003a000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2003a000 0x100>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
clock-names = "timer", "pclk";
};
tsadc: tsadc@20060000 {
compatible = "rockchip,rk3066-tsadc";
reg = <0x20060000 0x100>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "saradc", "apb_pclk";
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
resets = <&cru SRST_TSADC>;
reset-names = "saradc-apb";
status = "disabled";
};
usbphy: phy {
compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
usbphy0: usb-phy@17c {
#phy-cells = <0>;
reg = <0x17c>;
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
#clock-cells = <0>;
};
usbphy1: usb-phy@188 {
#phy-cells = <0>;
reg = <0x188>;
clocks = <&cru SCLK_OTGPHY1>;
clock-names = "phyclk";
#clock-cells = <0>;
};
};
pinctrl: pinctrl {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@20034000 {
compatible = "rockchip,gpio-bank";
reg = <0x20034000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio4@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio6@2000a000 {
compatible = "rockchip,gpio-bank";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_default: pcfg_pull_default {
bias-pull-pin-default;
};
pcfg_pull_none: pcfg_pull_none {
bias-disable;
};
emac {
emac_xfer: emac-xfer {
rockchip,pins = <1 RK_PC0 2 &pcfg_pull_none>, /* mac_clk */
<1 RK_PC1 2 &pcfg_pull_none>, /* tx_en */
<1 RK_PC2 2 &pcfg_pull_none>, /* txd1 */
<1 RK_PC3 2 &pcfg_pull_none>, /* txd0 */
<1 RK_PC4 2 &pcfg_pull_none>, /* rx_err */
<1 RK_PC5 2 &pcfg_pull_none>, /* crs_dvalid */
<1 RK_PC6 2 &pcfg_pull_none>, /* rxd1 */
<1 RK_PC7 2 &pcfg_pull_none>; /* rxd0 */
};
emac_mdio: emac-mdio {
rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>, /* mac_md */
<1 RK_PD1 2 &pcfg_pull_none>; /* mac_mdclk */
};
};
emmc {
emmc_clk: emmc-clk {
rockchip,pins = <3 RK_PD7 2 &pcfg_pull_default>;
};
emmc_cmd: emmc-cmd {
rockchip,pins = <4 RK_PB1 2 &pcfg_pull_default>;
};
emmc_rst: emmc-rst {
rockchip,pins = <4 RK_PB2 2 &pcfg_pull_default>;
};
/*
* The data pins are shared between nandc and emmc and
* not accessible through pinctrl. Also they should've
* been already set correctly by firmware, as
* flash/emmc is the boot-device.
*/
};
hdmi {
hdmi_hpd: hdmi-hpd {
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
};
hdmii2c_xfer: hdmii2c-xfer {
rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
<0 RK_PA2 1 &pcfg_pull_none>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <2 RK_PD4 1 &pcfg_pull_none>,
<2 RK_PD5 1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <2 RK_PD6 1 &pcfg_pull_none>,
<2 RK_PD7 1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none>,
<3 RK_PA1 1 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins = <3 RK_PA2 2 &pcfg_pull_none>,
<3 RK_PA3 2 &pcfg_pull_none>;
};
};
i2c4 {
i2c4_xfer: i2c4-xfer {
rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>,
<3 RK_PA5 1 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_out: pwm0-out {
rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_out: pwm1-out {
rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_out: pwm2-out {
rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_out: pwm3-out {
rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
};
};
spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <1 RK_PA5 2 &pcfg_pull_default>;
};
spi0_cs0: spi0-cs0 {
rockchip,pins = <1 RK_PA4 2 &pcfg_pull_default>;
};
spi0_tx: spi0-tx {
rockchip,pins = <1 RK_PA7 2 &pcfg_pull_default>;
};
spi0_rx: spi0-rx {
rockchip,pins = <1 RK_PA6 2 &pcfg_pull_default>;
};
spi0_cs1: spi0-cs1 {
rockchip,pins = <4 RK_PB7 1 &pcfg_pull_default>;
};
};
spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <2 RK_PC3 2 &pcfg_pull_default>;
};
spi1_cs0: spi1-cs0 {
rockchip,pins = <2 RK_PC4 2 &pcfg_pull_default>;
};
spi1_rx: spi1-rx {
rockchip,pins = <2 RK_PC6 2 &pcfg_pull_default>;
};
spi1_tx: spi1-tx {
rockchip,pins = <2 RK_PC5 2 &pcfg_pull_default>;
};
spi1_cs1: spi1-cs1 {
rockchip,pins = <2 RK_PC7 2 &pcfg_pull_default>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
<1 RK_PA1 1 &pcfg_pull_default>;
};
uart0_cts: uart0-cts {
rockchip,pins = <1 RK_PA2 1 &pcfg_pull_default>;
};
uart0_rts: uart0-rts {
rockchip,pins = <1 RK_PA3 1 &pcfg_pull_default>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <1 RK_PA4 1 &pcfg_pull_default>,
<1 RK_PA5 1 &pcfg_pull_default>;
};
uart1_cts: uart1-cts {
rockchip,pins = <1 RK_PA6 1 &pcfg_pull_default>;
};
uart1_rts: uart1-rts {
rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
<1 RK_PB1 1 &pcfg_pull_default>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
rockchip,pins = <3 RK_PD3 1 &pcfg_pull_default>,
<3 RK_PD4 1 &pcfg_pull_default>;
};
uart3_cts: uart3-cts {
rockchip,pins = <3 RK_PD5 1 &pcfg_pull_default>;
};
uart3_rts: uart3-rts {
rockchip,pins = <3 RK_PD6 1 &pcfg_pull_default>;
};
};
sd0 {
sd0_clk: sd0-clk {
rockchip,pins = <3 RK_PB0 1 &pcfg_pull_default>;
};
sd0_cmd: sd0-cmd {
rockchip,pins = <3 RK_PB1 1 &pcfg_pull_default>;
};
sd0_cd: sd0-cd {
rockchip,pins = <3 RK_PB6 1 &pcfg_pull_default>;
};
sd0_wp: sd0-wp {
rockchip,pins = <3 RK_PB7 1 &pcfg_pull_default>;
};
sd0_bus1: sd0-bus-width1 {
rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>;
};
sd0_bus4: sd0-bus-width4 {
rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>,
<3 RK_PB3 1 &pcfg_pull_default>,
<3 RK_PB4 1 &pcfg_pull_default>,
<3 RK_PB5 1 &pcfg_pull_default>;
};
};
sd1 {
sd1_clk: sd1-clk {
rockchip,pins = <3 RK_PC5 1 &pcfg_pull_default>;
};
sd1_cmd: sd1-cmd {
rockchip,pins = <3 RK_PC0 1 &pcfg_pull_default>;
};
sd1_cd: sd1-cd {
rockchip,pins = <3 RK_PC6 1 &pcfg_pull_default>;
};
sd1_wp: sd1-wp {
rockchip,pins = <3 RK_PC7 1 &pcfg_pull_default>;
};
sd1_bus1: sd1-bus-width1 {
rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>;
};
sd1_bus4: sd1-bus-width4 {
rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>,
<3 RK_PC2 1 &pcfg_pull_default>,
<3 RK_PC3 1 &pcfg_pull_default>,
<3 RK_PC4 1 &pcfg_pull_default>;
};
};
i2s0 {
i2s0_bus: i2s0-bus {
rockchip,pins = <0 RK_PA7 1 &pcfg_pull_default>,
<0 RK_PB0 1 &pcfg_pull_default>,
<0 RK_PB1 1 &pcfg_pull_default>,
<0 RK_PB2 1 &pcfg_pull_default>,
<0 RK_PB3 1 &pcfg_pull_default>,
<0 RK_PB4 1 &pcfg_pull_default>,
<0 RK_PB5 1 &pcfg_pull_default>,
<0 RK_PB6 1 &pcfg_pull_default>,
<0 RK_PB7 1 &pcfg_pull_default>;
};
};
i2s1 {
i2s1_bus: i2s1-bus {
rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
<0 RK_PC1 1 &pcfg_pull_default>,
<0 RK_PC2 1 &pcfg_pull_default>,
<0 RK_PC3 1 &pcfg_pull_default>,
<0 RK_PC4 1 &pcfg_pull_default>,
<0 RK_PC5 1 &pcfg_pull_default>;
};
};
i2s2 {
i2s2_bus: i2s2-bus {
rockchip,pins = <0 RK_PD0 1 &pcfg_pull_default>,
<0 RK_PD1 1 &pcfg_pull_default>,
<0 RK_PD2 1 &pcfg_pull_default>,
<0 RK_PD3 1 &pcfg_pull_default>,
<0 RK_PD4 1 &pcfg_pull_default>,
<0 RK_PD5 1 &pcfg_pull_default>;
};
};
};
};
&gpu {
compatible = "rockchip,rk3066-mali", "arm,mali-400";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp0",
"ppmmu0",
"pp1",
"ppmmu1",
"pp2",
"ppmmu2",
"pp3",
"ppmmu3";
power-domains = <&power RK3066_PD_GPU>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_xfer>;
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_xfer>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_xfer>;
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_xfer>;
};
&mmc0 {
clock-frequency = <50000000>;
dmas = <&dmac2 1>;
dma-names = "rx-tx";
max-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
};
&mmc1 {
dmas = <&dmac2 3>;
dma-names = "rx-tx";
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
};
&emmc {
dmas = <&dmac2 4>;
dma-names = "rx-tx";
};
&pmu {
power: power-controller {
compatible = "rockchip,rk3066-power-controller";
#power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
pd_vio@RK3066_PD_VIO {
reg = <RK3066_PD_VIO>;
clocks = <&cru ACLK_LCDC0>,
<&cru ACLK_LCDC1>,
<&cru DCLK_LCDC0>,
<&cru DCLK_LCDC1>,
<&cru HCLK_LCDC0>,
<&cru HCLK_LCDC1>,
<&cru SCLK_CIF1>,
<&cru ACLK_CIF1>,
<&cru HCLK_CIF1>,
<&cru SCLK_CIF0>,
<&cru ACLK_CIF0>,
<&cru HCLK_CIF0>,
<&cru HCLK_HDMI>,
<&cru ACLK_IPP>,
<&cru HCLK_IPP>,
<&cru ACLK_RGA>,
<&cru HCLK_RGA>;
pm_qos = <&qos_lcdc0>,
<&qos_lcdc1>,
<&qos_cif0>,
<&qos_cif1>,
<&qos_ipp>,
<&qos_rga>;
};
pd_video@RK3066_PD_VIDEO {
reg = <RK3066_PD_VIDEO>;
clocks = <&cru ACLK_VDPU>,
<&cru ACLK_VEPU>,
<&cru HCLK_VDPU>,
<&cru HCLK_VEPU>;
pm_qos = <&qos_vpu>;
};
pd_gpu@RK3066_PD_GPU {
reg = <RK3066_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu>;
};
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pwm1_out>;
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_out>;
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pwm3_out>;
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
};
&uart0 {
compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac1_s 0>, <&dmac1_s 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
};
&uart1 {
compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac1_s 2>, <&dmac1_s 3>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
};
&uart2 {
compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac2 6>, <&dmac2 7>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
};
&uart3 {
compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac2 8>, <&dmac2 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>;
};
&wdt {
compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
};
&emac {
compatible = "rockchip,rk3066-emac";
};
View Git Blame Copy Permalink