mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 23:23:55 +08:00
82ae9038dd
The Phytec phyBOARD Segin is i.MX6 based SBC, available with either an i.MX6UL or i.MX6ULL SOM and various add-on boards. The following adds support for the "Full Featured" version of the Segin, which is provided with the i.MX6UL SOM and the PEB-EVAL-01 evaluation module. Its hardware specifications are: * 512MB DDR3 memory * 512MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * RS232 * MicroSD external storage * Audio, RS232, I2C, SPI, CAN headers * Further I/O options via A/V and Expansion headers Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
149 lines
3.4 KiB
Plaintext
149 lines
3.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
|
|
* Author: Christian Hemp <c.hemp@phytec.de>
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include "imx6ul.dtsi"
|
|
|
|
/ {
|
|
model = "Phytec phyCORE i.MX6 UltraLite";
|
|
compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
/*
|
|
* Set the minimum memory size here and
|
|
* let the bootloader set the real size.
|
|
*/
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x8000000>;
|
|
};
|
|
|
|
gpio_leds_som: leds {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpioleds_som>;
|
|
compatible = "gpio-leds";
|
|
|
|
led_green {
|
|
label = "phycore:green";
|
|
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet1>;
|
|
phy-mode = "rmii";
|
|
phy-handle = <ðphy0>;
|
|
status = "okay";
|
|
|
|
mdio: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
micrel,led-mode = <1>;
|
|
clocks = <&clks IMX6UL_CLK_ENET_REF>;
|
|
clock-names = "rmii-ref";
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
|
nand-on-flash-bbt;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 =<&pinctrl_i2c1>;
|
|
clock-frequency = <100000>;
|
|
status = "okay";
|
|
|
|
eeprom@52 {
|
|
compatible = "catalyst,24c32", "atmel,24c32";
|
|
reg = <0x52>;
|
|
};
|
|
};
|
|
|
|
&snvs_poweroff {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_enet1: enet1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
|
|
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
|
|
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
|
|
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
|
|
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
|
|
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
|
|
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpioleds_som: gpioledssomgrp {
|
|
fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0>;
|
|
};
|
|
|
|
pinctrl_gpmi_nand: gpminandgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1
|
|
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1
|
|
MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1
|
|
MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000
|
|
MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1
|
|
MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1
|
|
MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1
|
|
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1
|
|
MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1
|
|
MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1
|
|
MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1
|
|
MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1
|
|
MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1
|
|
MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1
|
|
MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2cgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
|
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
|
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
};
|