2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
linux-next/drivers/tty/serial
Doug Anderson bb7f09ba96 serial: samsung: Use the passed in "port", fixing kgdb w/ no console
The two functions in the samsung serial driver used for writing
characters out to the port were inconsistent about whether they used
the passed in "port" or the global "cons_uart".  There was no reason
to use the global and the use of the global in
s3c24xx_serial_put_poll_char() caused a crash in the case where you
used the serial port for kgdboc but not for console.

Fix it so we used the passed in variable.

Note that this doesn't fix all problems with the samsung serial
driver.  Specifically:
* s3c24xx_serial_console_putchar() is still 99% identical to
  s3c24xx_serial_put_poll_char() (the function signature is different,
  but that's about it).  A future patch will make them slightly less
  identical and judging by other serial drivers we may need yet more
  differences eventually.
* The samsung serial driver still doesn't allow you to have more than
  one console port since it still uses the global cons_uart in
  s3c24xx_serial_console_write().

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24 15:38:21 -07:00
..
8250 serial: 8250: Fix thread unsafe __dma_tx_complete function 2014-04-24 15:18:02 -07:00
cpm_uart tty: delete non-required instances of include <linux/init.h> 2014-01-07 17:05:21 -08:00
jsm TTY: jsm, remove superfluous check 2013-03-18 16:17:20 -07:00
21285.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
68328serial.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 2013-05-10 07:22:35 -07:00
altera_jtaguart.c ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
altera_uart.c ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
amba-pl010.c serial: pl010: Convert to modern PM ops 2013-12-08 17:09:07 -08:00
amba-pl011.c serial: amba-pl011: fix regression, causing an Oops on rmmod 2014-04-16 14:31:13 -07:00
apbuart.c tty: serial: apbuart: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:33 -07:00
apbuart.h
ar933x_uart.c tty: ar933x_uart: add device tree support and binding documentation 2013-08-30 14:11:27 -07:00
arc_uart.c serial: arc_uart: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
atmel_serial.c ARM: SoC: cleanups for 3.15 2014-04-05 13:51:19 -07:00
bcm63xx_uart.c tty: serial: bcm63xx_uart: add support for DT probing 2014-02-28 16:27:18 -08:00
bfin_sport_uart.c serial: bfin_sport_uart: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
bfin_sport_uart.h
bfin_uart.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
clps711x.c Revert "serial: clps711x: Give a chance to perform useful tasks during wait loop" 2014-04-16 14:17:44 -07:00
crisv10.c tty: serial: crisv10: Drop remaining code for CRISv10 CPU simulator 2014-02-15 12:16:21 -08:00
crisv10.h crisv10: use counts from tty_port 2013-03-18 16:26:33 -07:00
dz.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
dz.h
efm32-uart.c serial: efm32: use $vendor,$device scheme for compatible string 2014-04-16 14:17:43 -07:00
fsl_lpuart.c serial: fsl_lpuart: add DMA support 2014-02-18 12:50:26 -08:00
icom.c serial: icom: dereference after free in load_code() 2013-12-08 17:16:05 -08:00
icom.h
ifx6x60.c serial: ifx6x60: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
ifx6x60.h
imx.c serial: imx: Remove init() and exit() platform callbacks 2014-02-28 16:36:45 -08:00
ioc3_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ioc4_serial.c serial: ioc4_serial: Staticize ioc4_serial_attach_one() 2013-08-12 11:35:32 -07:00
ip22zilog.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
ip22zilog.h
Kconfig serial: timberdale: Depend on X86_32 2014-04-16 14:17:44 -07:00
kgdb_nmi.c tty: delete non-required instances of include <linux/init.h> 2014-01-07 17:05:21 -08:00
kgdboc.c treewide: Convert retrun typos to return 2013-09-04 12:26:36 +02:00
lantiq.c serial: MIPS: lantiq: fix clock error check 2013-08-12 11:37:48 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
m32r_sio_reg.h
m32r_sio.c tty: serial: m32r_sio: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
m32r_sio.h
Makefile serial: Remove old SC26XX driver 2013-12-19 12:34:30 -08:00
max310x.c serial: max310x: Add missing #include <linux/uaccess.h> 2014-03-17 16:13:23 -07:00
max3100.c serial: use dev_get_platdata() 2013-07-31 17:56:15 -07:00
mcf.c tty: serial: mcf: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
mfd.c serial: mfd: Staticize local symbols 2013-10-29 16:34:11 -07:00
mpc52xx_uart.c serial: mpc512x: setup the PSC FIFO clock as well 2014-01-12 18:53:05 +01:00
mpsc.c serial: mpsc: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
mrst_max3110.c mrst_max3110: fix unbalanced IRQ issue during resume 2013-10-29 16:26:54 -07:00
mrst_max3110.h
msm_serial_hs.c serial: use dev_get_platdata() 2013-07-31 17:56:15 -07:00
msm_serial.c msm_serial: Add support for poll_{get,put}_char() 2014-02-12 11:34:23 -08:00
msm_serial.h msm_serial: Add support for poll_{get,put}_char() 2014-02-12 11:34:23 -08:00
msm_smd_tty.c TTY: msm_smd_tty, clean up activate/shutdown 2013-03-18 16:19:44 -07:00
mux.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mxs-auart.c tty: serial: mxs-auart: Check the return value from clk_prepare_enable() 2013-12-08 17:14:58 -08:00
netx-serial.c tty: serial: netx: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
nwpserial.c tty: serial: nwpserial: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:35 -07:00
of_serial.c tty: delete non-required instances of include <linux/init.h> 2014-01-07 17:05:21 -08:00
omap-serial.c serial: omap: Fix missing pm_runtime_resume handling by simplifying code 2014-04-16 14:19:13 -07:00
pch_uart.c serial: pch_uart: Fix build warning when CONFIG_DEBUG_FS=n 2014-02-13 09:17:31 -08:00
pmac_zilog.c TTY: pmac_zilog, check existence of ports in pmz_console_init() 2013-11-25 08:54:25 -08:00
pmac_zilog.h
pnx8xxx_uart.c tty: serial: pnx8xxx: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:35 -07:00
pxa.c serial: pxa: Staticize local symbols 2013-08-12 11:10:16 -07:00
rp2.c tty: remove DEFINE_PCI_DEVICE_TABLE macro 2013-12-08 17:09:07 -08:00
sa1100.c serial: sa1100: delete .set_wake callback 2013-10-16 13:16:18 -07:00
samsung.c serial: samsung: Use the passed in "port", fixing kgdb w/ no console 2014-04-24 15:38:21 -07:00
samsung.h serial: samsung: Remove casting the return value which is a void pointer 2013-09-26 14:29:59 -07:00
sb1250-duart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sccnxp.c serial: sccnxp: missing uart_unregister_driver() on error in sccnxp_probe() 2013-09-26 15:44:45 -07:00
serial_core.c serial_core: Fix pm imbalance on unbind 2014-04-16 14:19:13 -07:00
serial_ks8695.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
serial_txx9.c serial: txx9: remove unnecessary pci_set_drvdata() 2013-09-26 15:41:38 -07:00
serial-tegra.c serial: tegra: convert to standard DMA DT bindings 2013-12-11 16:44:35 -07:00
sh-sci.c TTY/Serial driver update for 3.15-rc1 2014-04-01 16:55:57 -07:00
sh-sci.h serial: sh-sci: Move overrun_bit and error_mask fields out of pdata 2013-12-24 11:17:48 +09:00
sirfsoc_uart.c serial: sirf: move to use generic dma dt-binding to get dma channels 2014-02-13 10:36:25 -08:00
sirfsoc_uart.h serial: sirf: move to use generic dma dt-binding to get dma channels 2014-02-13 10:36:25 -08:00
sn_console.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
st-asc.c serial: st-asc: Fix SysRq char handling 2014-04-16 14:17:44 -07:00
suncore.c
sunhv.c sparc: serial: Clean up the locking for -rt 2014-03-06 16:32:25 -05:00
sunsab.c sparc: serial: Clean up the locking for -rt 2014-03-06 16:32:25 -05:00
sunsab.h
sunsu.c sparc: serial: Clean up the locking for -rt 2014-03-06 16:32:25 -05:00
sunzilog.c sparc: serial: Clean up the locking for -rt 2014-03-06 16:32:25 -05:00
sunzilog.h
tilegx.c tilegx: Add tty serial support for TILE-Gx on-chip UART 2013-09-03 14:50:40 -04:00
timbuart.c serial: timbuart: Staticize local symbols 2013-08-12 11:35:31 -07:00
timbuart.h
uartlite.c tty: serial: uartlite: Support uartlite on big and little endian systems 2013-02-13 08:38:45 -08:00
ucc_uart.c DeviceTree updates for 3.13. This is a bit larger pull request than 2013-11-12 16:52:17 +09:00
vr41xx_siu.c serial: use dev_get_platdata() 2013-07-31 17:56:15 -07:00
vt8500_serial.c serial: vt8500: add missing braces 2013-10-16 13:22:16 -07:00
xilinx_uartps.c tty: xuartps: Properly guard sysrq specific code 2013-12-17 16:02:25 -08:00
zs.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
zs.h