2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 09:13:55 +08:00
linux-next/arch/arm/mach-omap1/io.c
Tony Lindgren df1e9d1c21 omap: Split omap_read/write functions for omap1 and omap2+
Otherwise multi-omap1 support for omap1 won't work as the cpu_class_is_omap1()
won't work until the SoC is detected.

Note that eventually these will go away, please use ioremap + read/write instead.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-10 09:46:24 -08:00

184 lines
4.1 KiB
C

/*
* linux/arch/arm/mach-omap1/io.c
*
* OMAP1 I/O mapping code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include "clock.h"
extern void omap_check_revision(void);
extern void omap_sram_init(void);
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
static struct map_desc omap_io_desc[] __initdata = {
{
.virtual = OMAP1_IO_VIRT,
.pfn = __phys_to_pfn(OMAP1_IO_PHYS),
.length = OMAP1_IO_SIZE,
.type = MT_DEVICE
}
};
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
static struct map_desc omap7xx_io_desc[] __initdata = {
{
.virtual = OMAP7XX_DSP_BASE,
.pfn = __phys_to_pfn(OMAP7XX_DSP_START),
.length = OMAP7XX_DSP_SIZE,
.type = MT_DEVICE
}, {
.virtual = OMAP7XX_DSPREG_BASE,
.pfn = __phys_to_pfn(OMAP7XX_DSPREG_START),
.length = OMAP7XX_DSPREG_SIZE,
.type = MT_DEVICE
}
};
#endif
#ifdef CONFIG_ARCH_OMAP15XX
static struct map_desc omap1510_io_desc[] __initdata = {
{
.virtual = OMAP1510_DSP_BASE,
.pfn = __phys_to_pfn(OMAP1510_DSP_START),
.length = OMAP1510_DSP_SIZE,
.type = MT_DEVICE
}, {
.virtual = OMAP1510_DSPREG_BASE,
.pfn = __phys_to_pfn(OMAP1510_DSPREG_START),
.length = OMAP1510_DSPREG_SIZE,
.type = MT_DEVICE
}
};
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
static struct map_desc omap16xx_io_desc[] __initdata = {
{
.virtual = OMAP16XX_DSP_BASE,
.pfn = __phys_to_pfn(OMAP16XX_DSP_START),
.length = OMAP16XX_DSP_SIZE,
.type = MT_DEVICE
}, {
.virtual = OMAP16XX_DSPREG_BASE,
.pfn = __phys_to_pfn(OMAP16XX_DSPREG_START),
.length = OMAP16XX_DSPREG_SIZE,
.type = MT_DEVICE
}
};
#endif
/*
* Maps common IO regions for omap1. This should only get called from
* board specific init.
*/
void __init omap1_map_common_io(void)
{
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
*/
local_flush_tlb_all();
flush_cache_all();
/* We want to check CPU revision early for cpu_is_omapxxxx() macros.
* IO space mapping must be initialized before we can do that.
*/
omap_check_revision();
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
if (cpu_is_omap7xx()) {
iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
if (cpu_is_omap16xx()) {
iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
}
#endif
omap_sram_init();
}
/*
* Common low-level hardware init for omap1. This should only get called from
* board specific init.
*/
void __init omap1_init_common_hw(void)
{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
/* Must init clocks early to assure that timer interrupt works
*/
omap1_clk_init();
omap1_mux_init();
}
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
u8 omap_readb(u32 pa)
{
return __raw_readb(OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readb);
u16 omap_readw(u32 pa)
{
return __raw_readw(OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readw);
u32 omap_readl(u32 pa)
{
return __raw_readl(OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readl);
void omap_writeb(u8 v, u32 pa)
{
__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writeb);
void omap_writew(u16 v, u32 pa)
{
__raw_writew(v, OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writew);
void omap_writel(u32 v, u32 pa)
{
__raw_writel(v, OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writel);