mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
40b42f1ebf
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits) i2c: Delete the i2c-isa pseudo bus driver hwmon: refuse to load abituguru driver on non-Abit boards hwmon: fix Abit Uguru3 driver detection on some motherboards hwmon/w83627ehf: Be quiet when no chip is found hwmon/w83627ehf: No need to initialize fan_min hwmon/w83627ehf: Export the thermal sensor types hwmon/w83627ehf: Enable VBAT monitoring hwmon/w83627ehf: Add support for the VID inputs hwmon/w83627ehf: Fix timing issues hwmon/w83627ehf: Add error messages for two error cases hwmon/w83627ehf: Convert to a platform driver hwmon/w83627ehf: Update the Kconfig entry make coretemp_device_remove() static hwmon: Add LM93 support hwmon: Improve the pwmN_enable documentation hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM hwmon: Add support for newer uGuru's hwmon/f71805f: Add temperature-tracking fan control mode hwmon/w83627ehf: Preserve speed reading when changing fan min hwmon: fix detection of abituguru volt inputs ... Manual fixup of trivial conflict in MAINTAINERS file
322 lines
12 KiB
Plaintext
322 lines
12 KiB
Plaintext
The following is a list of files and features that are going to be
|
|
removed in the kernel source tree. Every entry should contain what
|
|
exactly is going away, why it is happening, and who is going to be doing
|
|
the work. When the feature is removed from the kernel, it should also
|
|
be removed from this file.
|
|
|
|
---------------------------
|
|
|
|
What: MXSER
|
|
When: December 2007
|
|
Why: Old mxser driver is obsoleted by the mxser_new. Give it some time yet
|
|
and remove it.
|
|
Who: Jiri Slaby <jirislaby@gmail.com>
|
|
|
|
---------------------------
|
|
|
|
What: V4L2 VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP
|
|
When: October 2007
|
|
Why: Broken attempt to set MPEG compression parameters. These ioctls are
|
|
not able to implement the wide variety of parameters that can be set
|
|
by hardware MPEG encoders. A new MPEG control mechanism was created
|
|
in kernel 2.6.18 that replaces these ioctls. See the V4L2 specification
|
|
(section 1.9: Extended controls) for more information on this topic.
|
|
Who: Hans Verkuil <hverkuil@xs4all.nl> and
|
|
Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
|
|
---------------------------
|
|
|
|
What: dev->power.power_state
|
|
When: July 2007
|
|
Why: Broken design for runtime control over driver power states, confusing
|
|
driver-internal runtime power management with: mechanisms to support
|
|
system-wide sleep state transitions; event codes that distinguish
|
|
different phases of swsusp "sleep" transitions; and userspace policy
|
|
inputs. This framework was never widely used, and most attempts to
|
|
use it were broken. Drivers should instead be exposing domain-specific
|
|
interfaces either to kernel or to userspace.
|
|
Who: Pavel Machek <pavel@suse.cz>
|
|
|
|
---------------------------
|
|
|
|
What: old NCR53C9x driver
|
|
When: October 2007
|
|
Why: Replaced by the much better esp_scsi driver. Actual low-level
|
|
driver can be ported over almost trivially.
|
|
Who: David Miller <davem@davemloft.net>
|
|
Christoph Hellwig <hch@lst.de>
|
|
|
|
---------------------------
|
|
|
|
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
|
|
When: December 2006
|
|
Files: include/linux/video_decoder.h
|
|
Check: include/linux/video_decoder.h
|
|
Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
|
|
series. The old API have lots of drawbacks and don't provide enough
|
|
means to work with all video and audio standards. The newer API is
|
|
already available on the main drivers and should be used instead.
|
|
Newer drivers should use v4l_compat_translate_ioctl function to handle
|
|
old calls, replacing to newer ones.
|
|
Decoder iocts are using internally to allow video drivers to
|
|
communicate with video decoders. This should also be improved to allow
|
|
V4L2 calls being translated into compatible internal ioctls.
|
|
Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
|
|
---------------------------
|
|
|
|
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
|
|
When: November 2005
|
|
Files: drivers/pcmcia/: pcmcia_ioctl.c
|
|
Why: With the 16-bit PCMCIA subsystem now behaving (almost) like a
|
|
normal hotpluggable bus, and with it using the default kernel
|
|
infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
|
|
control ioctl needed by cardmgr and cardctl from pcmcia-cs is
|
|
unnecessary, and makes further cleanups and integration of the
|
|
PCMCIA subsystem into the Linux kernel device driver model more
|
|
difficult. The features provided by cardmgr and cardctl are either
|
|
handled by the kernel itself now or are available in the new
|
|
pcmciautils package available at
|
|
http://kernel.org/pub/linux/utils/kernel/pcmcia/
|
|
Who: Dominik Brodowski <linux@brodo.de>
|
|
|
|
---------------------------
|
|
|
|
What: remove EXPORT_SYMBOL(kernel_thread)
|
|
When: August 2006
|
|
Files: arch/*/kernel/*_ksyms.c
|
|
Check: kernel_thread
|
|
Why: kernel_thread is a low-level implementation detail. Drivers should
|
|
use the <linux/kthread.h> API instead which shields them from
|
|
implementation details and provides a higherlevel interface that
|
|
prevents bugs and code duplication
|
|
Who: Christoph Hellwig <hch@lst.de>
|
|
|
|
---------------------------
|
|
|
|
What: CONFIG_FORCED_INLINING
|
|
When: June 2006
|
|
Why: Config option is there to see if gcc is good enough. (in january
|
|
2006). If it is, the behavior should just be the default. If it's not,
|
|
the option should just go away entirely.
|
|
Who: Arjan van de Ven
|
|
|
|
---------------------------
|
|
|
|
What: eepro100 network driver
|
|
When: January 2007
|
|
Why: replaced by the e100 driver
|
|
Who: Adrian Bunk <bunk@stusta.de>
|
|
|
|
---------------------------
|
|
|
|
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
|
|
(temporary transition config option provided until then)
|
|
The transition config option will also be removed at the same time.
|
|
When: before 2.6.19
|
|
Why: Unused symbols are both increasing the size of the kernel binary
|
|
and are often a sign of "wrong API"
|
|
Who: Arjan van de Ven <arjan@linux.intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: USB driver API moves to EXPORT_SYMBOL_GPL
|
|
When: February 2008
|
|
Files: include/linux/usb.h, drivers/usb/core/driver.c
|
|
Why: The USB subsystem has changed a lot over time, and it has been
|
|
possible to create userspace USB drivers using usbfs/libusb/gadgetfs
|
|
that operate as fast as the USB bus allows. Because of this, the USB
|
|
subsystem will not be allowing closed source kernel drivers to
|
|
register with it, after this grace period is over. If anyone needs
|
|
any help in converting their closed source drivers over to use the
|
|
userspace filesystems, please contact the
|
|
linux-usb-devel@lists.sourceforge.net mailing list, and the developers
|
|
there will be glad to help you out.
|
|
Who: Greg Kroah-Hartman <gregkh@suse.de>
|
|
|
|
---------------------------
|
|
|
|
What: vm_ops.nopage
|
|
When: Soon, provided in-kernel callers have been converted
|
|
Why: This interface is replaced by vm_ops.fault, but it has been around
|
|
forever, is used by a lot of drivers, and doesn't cost much to
|
|
maintain.
|
|
Who: Nick Piggin <npiggin@suse.de>
|
|
|
|
---------------------------
|
|
|
|
What: Interrupt only SA_* flags
|
|
When: September 2007
|
|
Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
|
|
out of the signal namespace.
|
|
|
|
Who: Thomas Gleixner <tglx@linutronix.de>
|
|
|
|
---------------------------
|
|
|
|
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
|
|
When: October 2008
|
|
Why: The stacking of class devices makes these values misleading and
|
|
inconsistent.
|
|
Class devices should not carry any of these properties, and bus
|
|
devices have SUBSYTEM and DRIVER as a replacement.
|
|
Who: Kay Sievers <kay.sievers@suse.de>
|
|
|
|
---------------------------
|
|
|
|
What: i2c_adapter.list
|
|
When: July 2007
|
|
Why: Superfluous, this list duplicates the one maintained by the driver
|
|
core.
|
|
Who: Jean Delvare <khali@linux-fr.org>,
|
|
David Brownell <dbrownell@users.sourceforge.net>
|
|
|
|
---------------------------
|
|
|
|
What: drivers depending on OBSOLETE_OSS
|
|
When: options in 2.6.22, code in 2.6.24
|
|
Why: OSS drivers with ALSA replacements
|
|
Who: Adrian Bunk <bunk@stusta.de>
|
|
|
|
---------------------------
|
|
|
|
What: /sys/firmware/acpi/namespace
|
|
When: 2.6.21
|
|
Why: The ACPI namespace is effectively the symbol list for
|
|
the BIOS. The device names are completely arbitrary
|
|
and have no place being exposed to user-space.
|
|
|
|
For those interested in the BIOS ACPI namespace,
|
|
the BIOS can be extracted and disassembled with acpidump
|
|
and iasl as documented in the pmtools package here:
|
|
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
|
|
Who: Len Brown <len.brown@intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: ACPI procfs interface
|
|
When: July 2007
|
|
Why: After ACPI sysfs conversion, ACPI attributes will be duplicated
|
|
in sysfs and the ACPI procfs interface should be removed.
|
|
Who: Zhang Rui <rui.zhang@intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: /proc/acpi/button
|
|
When: August 2007
|
|
Why: /proc/acpi/button has been replaced by events to the input layer
|
|
since 2.6.20.
|
|
Who: Len Brown <len.brown@intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: Compaq touchscreen device emulation
|
|
When: Oct 2007
|
|
Files: drivers/input/tsdev.c
|
|
Why: The code says it was obsolete when it was written in 2001.
|
|
tslib is a userspace library which does anything tsdev can do and
|
|
much more besides in userspace where this code belongs. There is no
|
|
longer any need for tsdev and applications should have converted to
|
|
use tslib by now.
|
|
The name "tsdev" is also extremely confusing and lots of people have
|
|
it loaded when they don't need/use it.
|
|
Who: Richard Purdie <rpurdie@rpsys.net>
|
|
|
|
---------------------------
|
|
|
|
What: read_dev_chars(), read_conf_data{,_lpm}() (s390 common I/O layer)
|
|
When: December 2007
|
|
Why: These functions are a leftover from 2.4 times. They have several
|
|
problems:
|
|
- Duplication of checks that are done in the device driver's
|
|
interrupt handler
|
|
- common I/O layer can't do device specific error recovery
|
|
- device driver can't be notified for conditions happening during
|
|
execution of the function
|
|
Device drivers should issue the read device characteristics and read
|
|
configuration data ccws and do the appropriate error handling
|
|
themselves.
|
|
Who: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
|
|
---------------------------
|
|
|
|
What: i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers
|
|
When: September 2007
|
|
Why: Obsolete. The new i2c-gpio driver replaces all hardware-specific
|
|
I2C-over-GPIO drivers.
|
|
Who: Jean Delvare <khali@linux-fr.org>
|
|
|
|
---------------------------
|
|
|
|
What: 'time' kernel boot parameter
|
|
When: January 2008
|
|
Why: replaced by 'printk.time=<value>' so that printk timestamps can be
|
|
enabled or disabled as needed
|
|
Who: Randy Dunlap <randy.dunlap@oracle.com>
|
|
|
|
---------------------------
|
|
|
|
What: drivers depending on OSS_OBSOLETE
|
|
When: options in 2.6.23, code in 2.6.25
|
|
Why: obsolete OSS drivers
|
|
Who: Adrian Bunk <bunk@stusta.de>
|
|
|
|
---------------------------
|
|
|
|
What: libata spindown skipping and warning
|
|
When: Dec 2008
|
|
Why: Some halt(8) implementations synchronize caches for and spin
|
|
down libata disks because libata didn't use to spin down disk on
|
|
system halt (only synchronized caches).
|
|
Spin down on system halt is now implemented. sysfs node
|
|
/sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
|
|
spin down support is available.
|
|
Because issuing spin down command to an already spun down disk
|
|
makes some disks spin up just to spin down again, libata tracks
|
|
device spindown status to skip the extra spindown command and
|
|
warn about it.
|
|
This is to give userspace tools the time to get updated and will
|
|
be removed after userspace is reasonably updated.
|
|
Who: Tejun Heo <htejun@gmail.com>
|
|
|
|
---------------------------
|
|
|
|
What: Legacy RTC drivers (under drivers/i2c/chips)
|
|
When: November 2007
|
|
Why: Obsolete. We have a RTC subsystem with better drivers.
|
|
Who: Jean Delvare <khali@linux-fr.org>
|
|
|
|
---------------------------
|
|
|
|
What: iptables SAME target
|
|
When: 1.1. 2008
|
|
Files: net/ipv4/netfilter/ipt_SAME.c, include/linux/netfilter_ipv4/ipt_SAME.h
|
|
Why: Obsolete for multiple years now, NAT core provides the same behaviour.
|
|
Unfixable broken wrt. 32/64 bit cleanness.
|
|
Who: Patrick McHardy <kaber@trash.net>
|
|
|
|
---------------------------
|
|
|
|
What: The arch/ppc and include/asm-ppc directories
|
|
When: Jun 2008
|
|
Why: The arch/powerpc tree is the merged architecture for ppc32 and ppc64
|
|
platforms. Currently there are efforts underway to port the remaining
|
|
arch/ppc platforms to the merged tree. New submissions to the arch/ppc
|
|
tree have been frozen with the 2.6.22 kernel release and that tree will
|
|
remain in bug-fix only mode until its scheduled removal. Platforms
|
|
that are not ported by June 2008 will be removed due to the lack of an
|
|
interested maintainer.
|
|
Who: linuxppc-dev@ozlabs.org
|
|
|
|
---------------------------
|
|
|
|
What: mthca driver's MSI support
|
|
When: January 2008
|
|
Files: drivers/infiniband/hw/mthca/*.[ch]
|
|
Why: All mthca hardware also supports MSI-X, which provides
|
|
strictly more functionality than MSI. So there is no point in
|
|
having both MSI-X and MSI support in the driver.
|
|
Who: Roland Dreier <rolandd@cisco.com>
|
|
|
|
---------------------------
|