2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-30 16:13:54 +08:00
linux-next/net/mac80211/offchannel.c
Ben Greear b23b025fe2 mac80211: Optimize scans on current operating channel.
This should decrease un-necessary flushes, on/off channel work,
and channel changes in cases where the only scanned channel is
the current operating channel.

* Removes SCAN_OFF_CHANNEL flag, uses SDATA_STATE_OFFCHANNEL
  and is-scanning flags instead.

* Add helper method to determine if we are currently configured
  for the operating channel.

* Do no blindly go off/on channel in work.c  Instead, only call
  appropriate on/off code when we really need to change channels.
  Always enable offchannel-ps mode when starting work,
  and disable it when we are done.

* Consolidate ieee80211_offchannel_stop_station and
  ieee80211_offchannel_stop_beaconing, call it
  ieee80211_offchannel_stop_vifs instead.

* Accept non-beacon frames when scanning on operating channel.

* Scan state machine optimized to minimize on/off channel
  transitions.  Also, when going on-channel, go ahead and
  re-enable beaconing.  We're going to be there for 200ms,
  so seems like some useful beaconing could happen.
  Always enable offchannel-ps mode when starting software
  scan, and disable it when we are done.

* Grab local->mtx earlier in __ieee80211_scan_completed_finish
  so that we are protected when calling hw_config(), etc.

* Pass probe-responses up the stack if scanning on local
  channel, so that mlme can take a look.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04 16:30:32 -05:00

284 lines
8.5 KiB
C

/*
* Off-channel operation helpers
*
* Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
* Copyright 2004, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "driver-trace.h"
/*
* Tell our hardware to disable PS.
* Optionally inform AP that we will go to sleep so that it will buffer
* the frames while we are doing off-channel work. This is optional
* because we *may* be doing work on-operating channel, and want our
* hardware unconditionally awake, but still let the AP send us normal frames.
*/
static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata,
bool tell_ap)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
local->offchannel_ps_enabled = false;
/* FIXME: what to do when local->pspolling is true? */
del_timer_sync(&local->dynamic_ps_timer);
del_timer_sync(&ifmgd->bcn_mon_timer);
del_timer_sync(&ifmgd->conn_mon_timer);
cancel_work_sync(&local->dynamic_ps_enable_work);
if (local->hw.conf.flags & IEEE80211_CONF_PS) {
local->offchannel_ps_enabled = true;
local->hw.conf.flags &= ~IEEE80211_CONF_PS;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
}
if (tell_ap && (!local->offchannel_ps_enabled ||
!(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)))
/*
* If power save was enabled, no need to send a nullfunc
* frame because AP knows that we are sleeping. But if the
* hardware is creating the nullfunc frame for power save
* status (ie. IEEE80211_HW_PS_NULLFUNC_STACK is not
* enabled) and power save was enabled, the firmware just
* sent a null frame with power save disabled. So we need
* to send a new nullfunc frame to inform the AP that we
* are again sleeping.
*/
ieee80211_send_nullfunc(local, sdata, 1);
}
/* inform AP that we are awake again, unless power save is enabled */
static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
if (!local->ps_sdata)
ieee80211_send_nullfunc(local, sdata, 0);
else if (local->offchannel_ps_enabled) {
/*
* In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
* will send a nullfunc frame with the powersave bit set
* even though the AP already knows that we are sleeping.
* This could be avoided by sending a null frame with power
* save bit disabled before enabling the power save, but
* this doesn't gain anything.
*
* When IEEE80211_HW_PS_NULLFUNC_STACK is enabled, no need
* to send a nullfunc frame because AP already knows that
* we are sleeping, let's just enable power save mode in
* hardware.
*/
/* TODO: Only set hardware if CONF_PS changed?
* TODO: Should we set offchannel_ps_enabled to false?
*/
local->hw.conf.flags |= IEEE80211_CONF_PS;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
} else if (local->hw.conf.dynamic_ps_timeout > 0) {
/*
* If IEEE80211_CONF_PS was not set and the dynamic_ps_timer
* had been running before leaving the operating channel,
* restart the timer now and send a nullfunc frame to inform
* the AP that we are awake.
*/
ieee80211_send_nullfunc(local, sdata, 0);
mod_timer(&local->dynamic_ps_timer, jiffies +
msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
}
ieee80211_sta_reset_beacon_monitor(sdata);
ieee80211_sta_reset_conn_monitor(sdata);
}
void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local,
bool offchannel_ps_enable)
{
struct ieee80211_sub_if_data *sdata;
/*
* notify the AP about us leaving the channel and stop all
* STA interfaces.
*/
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type != NL80211_IFTYPE_MONITOR)
set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
/* Check to see if we should disable beaconing. */
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
ieee80211_bss_info_change_notify(
sdata, BSS_CHANGED_BEACON_ENABLED);
if (sdata->vif.type != NL80211_IFTYPE_MONITOR) {
netif_tx_stop_all_queues(sdata->dev);
if (offchannel_ps_enable &&
(sdata->vif.type == NL80211_IFTYPE_STATION) &&
sdata->u.mgd.associated)
ieee80211_offchannel_ps_enable(sdata, true);
}
}
mutex_unlock(&local->iflist_mtx);
}
void ieee80211_offchannel_enable_all_ps(struct ieee80211_local *local,
bool tell_ap)
{
struct ieee80211_sub_if_data *sdata;
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
sdata->u.mgd.associated)
ieee80211_offchannel_ps_enable(sdata, tell_ap);
}
mutex_unlock(&local->iflist_mtx);
}
void ieee80211_offchannel_return(struct ieee80211_local *local,
bool enable_beaconing,
bool offchannel_ps_disable)
{
struct ieee80211_sub_if_data *sdata;
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
/* Tell AP we're back */
if (offchannel_ps_disable &&
sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated)
ieee80211_offchannel_ps_disable(sdata);
}
if (sdata->vif.type != NL80211_IFTYPE_MONITOR) {
clear_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
/*
* This may wake up queues even though the driver
* currently has them stopped. This is not very
* likely, since the driver won't have gotten any
* (or hardly any) new packets while we weren't
* on the right channel, and even if it happens
* it will at most lead to queueing up one more
* packet per queue in mac80211 rather than on
* the interface qdisc.
*/
netif_tx_wake_all_queues(sdata->dev);
}
/* Check to see if we should re-enable beaconing */
if (enable_beaconing &&
(sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT))
ieee80211_bss_info_change_notify(
sdata, BSS_CHANGED_BEACON_ENABLED);
}
mutex_unlock(&local->iflist_mtx);
}
static void ieee80211_hw_roc_start(struct work_struct *work)
{
struct ieee80211_local *local =
container_of(work, struct ieee80211_local, hw_roc_start);
struct ieee80211_sub_if_data *sdata;
mutex_lock(&local->mtx);
if (!local->hw_roc_channel) {
mutex_unlock(&local->mtx);
return;
}
ieee80211_recalc_idle(local);
if (local->hw_roc_skb) {
sdata = IEEE80211_DEV_TO_SUB_IF(local->hw_roc_dev);
ieee80211_tx_skb(sdata, local->hw_roc_skb);
local->hw_roc_skb = NULL;
} else {
cfg80211_ready_on_channel(local->hw_roc_dev,
local->hw_roc_cookie,
local->hw_roc_channel,
local->hw_roc_channel_type,
local->hw_roc_duration,
GFP_KERNEL);
}
mutex_unlock(&local->mtx);
}
void ieee80211_ready_on_channel(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
trace_api_ready_on_channel(local);
ieee80211_queue_work(hw, &local->hw_roc_start);
}
EXPORT_SYMBOL_GPL(ieee80211_ready_on_channel);
static void ieee80211_hw_roc_done(struct work_struct *work)
{
struct ieee80211_local *local =
container_of(work, struct ieee80211_local, hw_roc_done);
mutex_lock(&local->mtx);
if (!local->hw_roc_channel) {
mutex_unlock(&local->mtx);
return;
}
if (!local->hw_roc_for_tx)
cfg80211_remain_on_channel_expired(local->hw_roc_dev,
local->hw_roc_cookie,
local->hw_roc_channel,
local->hw_roc_channel_type,
GFP_KERNEL);
local->hw_roc_channel = NULL;
local->hw_roc_cookie = 0;
ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
}
void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
trace_api_remain_on_channel_expired(local);
ieee80211_queue_work(hw, &local->hw_roc_done);
}
EXPORT_SYMBOL_GPL(ieee80211_remain_on_channel_expired);
void ieee80211_hw_roc_setup(struct ieee80211_local *local)
{
INIT_WORK(&local->hw_roc_start, ieee80211_hw_roc_start);
INIT_WORK(&local->hw_roc_done, ieee80211_hw_roc_done);
}