Dan Williams 7b0c5f21f3 sierra_net: keep status interrupt URB active ... The driver and firmware sync up through SYNC messages, and the firmware's affirmative reply to these SYNC messages appears to be the "Reset" indication received via the status interrupt endpoint. Thus the driver needs the status interrupt endpoint always active so that the Reset indication can be received even if the netdev is closed, which is the case right after device insertion. If the Reset indication is not received by the driver, it continues sending SYNC messages to the firmware, which crashes about 10 seconds later and the device stops responding. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2013-05-08 13:13:29 -07:00
..
asix_common.c	asix: fix BUG in receive path when lowering MTU	2013-05-03 16:10:33 -04:00
asix_devices.c	usbnet: asix: apply usbnet_link_change	2013-04-11 15:57:16 -04:00
asix.h	net: asix: handle packets crossing URB boundaries	2013-01-18 14:13:29 -05:00
ax88172a.c	drivers: net: usb: Remove unnecessary alloc/OOM messages	2013-02-04 13:22:34 -05:00
ax88179_178a.c	usbnet: ax88179_1781: apply usbnet_link_change	2013-04-11 15:57:17 -04:00
catc.c	ethtool: fix drvinfo strings set in drivers	2013-01-06 21:06:31 -08:00
cdc_eem.c	net: usb: cdc_eem: Fix rx skb allocation for 802.1Q VLANs	2012-11-07 21:12:26 -05:00
cdc_ether.c	qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card	2013-05-08 12:08:14 -07:00
cdc_mbim.c	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next	2013-05-01 14:08:52 -07:00
cdc_ncm.c	usbnet: cdc_ncm: apply usbnet_link_change	2013-04-11 15:57:16 -04:00
cdc_subset.c	USB: Disable hub-initiated LPM for comms devices.	2012-05-18 15:42:55 -07:00
cdc-phonet.c	cdc-phonet: Don't leak in usbpn_open	2012-08-08 16:04:47 -07:00
cx82310_eth.c	net: cx82310_eth: use common match macro	2012-09-03 13:51:02 -04:00
dm9601.c	usbnet: dm9601: apply usbnet_link_change	2013-04-11 15:57:17 -04:00
gl620a.c	USB: remove dbg() usage in USB networking drivers	2012-09-20 17:53:14 -04:00
hso.c	TTY: add tty_port_tty_hangup helper	2013-03-18 16:24:29 -07:00
int51x1.c	usbnet: int51x1: apply introduced usb command APIs	2012-10-26 03:36:51 -04:00
ipheth.c	usb/ipheth: Add iPhone 5 support	2012-10-18 15:34:30 -04:00
kalmia.c	remove init of dev->perm_addr in drivers	2013-01-08 18:00:48 -08:00
kaweth.c	kaweth: print correct debug ptr	2012-10-11 15:12:33 -04:00
Kconfig	net/usb: new driver for RTL8152	2013-05-06 16:16:52 -04:00
lg-vl600.c	USB: Disable hub-initiated LPM for comms devices.	2012-05-18 15:42:55 -07:00
Makefile	net/usb: new driver for RTL8152	2013-05-06 16:16:52 -04:00
mcs7830.c	usbnet: mcs7830: apply usbnet_link_change	2013-04-11 15:57:16 -04:00
net1080.c	usbnet: net1080: apply introduced usb command APIs	2012-10-26 03:36:51 -04:00
pegasus.c	usbnet: pegasus: endian bug in write_mii_word()	2013-05-03 16:10:23 -04:00
pegasus.h	drivers: net: usb: pegasus: fix control urb submission	2013-04-29 13:57:50 -04:00
plusb.c	usbnet: plusb: apply introduced usb command APIs	2012-10-26 03:36:51 -04:00
qmi_wwan.c	qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card	2013-05-08 12:08:14 -07:00
r8152.c	net/usb: new driver for RTL8152	2013-05-06 16:16:52 -04:00
rndis_host.c	remove init of dev->perm_addr in drivers	2013-01-08 18:00:48 -08:00
rtl8150.c	ethtool: fix drvinfo strings set in drivers	2013-01-06 21:06:31 -08:00
sierra_net.c	sierra_net: keep status interrupt URB active	2013-05-08 13:13:29 -07:00
smsc75xx.c	Merge 3.9-rc6 into usb-next	2013-04-08 08:36:40 -07:00
smsc75xx.h	smsc75xx: replace 0xffff with PHY_INT_SRC_CLEAR_ALL	2012-05-07 23:43:56 -04:00
smsc95xx.c	usbnet: smsc95xx: don't recover device if suspend fails in system sleep	2013-03-25 10:55:46 -07:00
smsc95xx.h	smsc95xx: support PHY wakeup source	2012-11-23 14:15:18 -05:00
usbnet.c	usbnet: allow status interrupt URB to always be active	2013-05-08 13:13:29 -07:00
zaurus.c	USB: Disable hub-initiated LPM for comms devices.	2012-05-18 15:42:55 -07:00