renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-07 13:13:57 +08:00
Code
b79a3a97f6
linux-next/drivers/gpu/drm/sun4i
History
Paul Kocialkowski b79a3a97f6
drm/sun4i: frontend: Replace ARGB with XRGB as supported format 
The frontend documentation (for the A33) mentions that ARGB is supported
as output, but with the alpha component always set to 0xff. In practice,
this means that the alpha component cannot be preserved when going
through the frontend. Since the information is lost, ARGB is not
properly supported.

As a result, expose the matching format supported by the frontend (both
for input and output) as XRGB instead of ARGB.

Since ARGB was the selected format for connecting the frontend to the
backend, change it to XRGB to reflect this as well.

The A31 and A80 SoCs apparently have a bit to enable proper alpha,
but this is not supported at this point (see the comment already in the
code).

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-3-paul.kocialkowski@bootlin.com
2018-11-27 09:30:51 +01:00
..
Kconfig drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=m 2018-07-12 09:35:19 +02:00
Makefile BackMerge v4.18-rc7 into drm-next 2018-07-30 10:39:22 +10:00
sun4i_backend.c drm/sun4i: Cleanup video/YUV source before enabling a layer 2018-11-27 09:30:42 +01:00
sun4i_backend.h drm/sun4i: Cleanup video/YUV source before enabling a layer 2018-11-27 09:30:42 +01:00
sun4i_crtc.c drm/sun4i: Use drm_crtc_mask() 2018-07-02 18:45:56 +03:00
sun4i_crtc.h drm/sun4i: abstract a engine type 2017-06-01 09:47:23 +02:00
sun4i_dotclock.c drm/sun4i: Fix an ulong overflow in the dotclock driver 2018-10-19 11:50:25 +02:00
sun4i_dotclock.h
sun4i_drv.c drm/sun4i: Use drm_fbdev_generic_setup() 2018-11-01 15:25:11 +01:00
sun4i_drv.h drm/sun4i: Add a driver for the display frontend 2018-01-22 15:15:38 +01:00
sun4i_framebuffer.c drm/sun4i: Use drm_fbdev_generic_setup() 2018-11-01 15:25:11 +01:00
sun4i_framebuffer.h drm/sun4i: Use drm_fbdev_generic_setup() 2018-11-01 15:25:11 +01:00
sun4i_frontend.c drm/sun4i: frontend: Replace ARGB with XRGB as supported format 2018-11-27 09:30:51 +01:00
sun4i_frontend.h drm/sun4i: Add a driver for the display frontend 2018-01-22 15:15:38 +01:00
sun4i_hdmi_ddc_clk.c drm/sun4i: tcon: Don't rely on encoders to set the TCON mode 2017-10-17 19:49:13 +02:00
sun4i_hdmi_enc.c drm: drop _mode_ from drm_mode_connector_attach_encoder 2018-07-13 18:40:27 +02:00
sun4i_hdmi_i2c.c drm/sun4i: hdmi: Add support for controller hardware variants 2017-10-11 09:53:33 +02:00
sun4i_hdmi_tmds_clk.c drm/sun4i: hdmi: Fix double flag assignation 2018-10-29 14:19:51 +01:00
sun4i_hdmi.h drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits 2017-10-16 09:54:21 +02:00
sun4i_layer.c drm/sun4i: frontend: Replace ARGB with XRGB as supported format 2018-11-27 09:30:51 +01:00
sun4i_layer.h drm/sun4i: backend: Assign the pipes automatically 2018-02-22 16:19:52 +01:00
sun4i_lvds.c drm/sun4i: tcon: fix check of tcon->panel null pointer 2018-10-08 11:20:50 +02:00
sun4i_lvds.h drm/sun4i: Add LVDS support 2018-01-04 20:37:17 +01:00
sun4i_rgb.c drm/sun4i: tcon: fix check of tcon->panel null pointer 2018-10-08 11:20:50 +02:00
sun4i_rgb.h drm/sun4i: rgb: Pass tcon pointer when initializing RGB encoder 2017-03-07 22:18:24 +01:00
sun4i_tcon.c drm/sun4i: tcon: Support an active-low DE signal with RGB interface 2018-11-09 08:31:28 +01:00
sun4i_tcon.h drm/sun4i: tcon: Support an active-low DE signal with RGB interface 2018-11-09 08:31:28 +01:00
sun4i_tv.c drm: drop _mode_ from drm_mode_connector_attach_encoder 2018-07-13 18:40:27 +02:00
sun6i_drc.c headers: separate linux/mod_devicetable.h from linux/platform_device.h 2018-07-07 17:52:26 +02:00
sun6i_mipi_dphy.c drm/sun4i: Add Allwinner A31 MIPI-DSI controller support 2018-04-11 13:19:17 +02:00
sun6i_mipi_dsi.c drm: drop _mode_ from drm_mode_connector_attach_encoder 2018-07-13 18:40:27 +02:00
sun6i_mipi_dsi.h drm/sun4i: Add Allwinner A31 MIPI-DSI controller support 2018-04-11 13:19:17 +02:00
sun8i_csc.c drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_csc.h drm/sun4i: Add DE2 CSC library 2017-12-05 13:22:44 +01:00
sun8i_dw_hdmi.c drm/sun4i: Add support for Synopsys HDMI PHY 2018-11-05 11:49:05 +01:00
sun8i_dw_hdmi.h drm/sun4i: Add support for Synopsys HDMI PHY 2018-11-05 11:49:05 +01:00
sun8i_hdmi_phy_clk.c drm/sun4i: Add support for second clock parent to DW HDMI PHY clk driver 2018-06-27 21:44:02 +02:00
sun8i_hdmi_phy.c drm/sun4i: Add support for H6 HDMI PHY 2018-11-05 11:49:05 +01:00
sun8i_mixer.c drm/sun4i: Add support for H6 DE3 mixer 0 2018-11-05 11:49:03 +01:00
sun8i_mixer.h drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_tcon_top.c drm: sun4i: add support for H6 TCON TOP 2018-11-05 11:49:06 +01:00
sun8i_tcon_top.h drm/sun4i: tcon-top: Add helpers for mux switching 2018-07-11 09:54:54 +02:00
sun8i_ui_layer.c drm/sun4i: wait on implicit fence before display 2018-11-22 10:07:26 +01:00
sun8i_ui_layer.h drm/sun4i: Rework DE2 register defines 2018-11-05 10:34:43 +01:00
sun8i_ui_scaler.c drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_ui_scaler.h drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_vi_layer.c drm/sun4i: wait on implicit fence before display 2018-11-22 10:07:26 +01:00
sun8i_vi_layer.h drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_vi_scaler.c drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_vi_scaler.h drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sunxi_engine.h drm/sun4i: Fix build warnings in sunxi_engine.h 2018-01-23 10:45:01 +01:00