David Howells ddb7d1e975 MN10300: Clear ASB2364 peripheral interrupt masks before enabling interrupts ... Clear the interrupt mask registers of ASB2364 peripherals before enabling interrupts so that any peripherals that weren't dealt with by the bootloader after a reboot (if there was one) won't cause an interrupt storm when interrupts are first enabled before the drivers are initialised. Also, attempt to reset the peripherals attached to the FPGA. Signed-off-by: David Howells <dhowells@redhat.com>		2011-03-18 16:52:54 +00:00
..
include/unit	MN10300: Fix the ASB2364 gdbport UART register defs	2011-03-18 16:52:54 +00:00
irq-fpga.c	MN10300: Clear ASB2364 peripheral interrupt masks before enabling interrupts	2011-03-18 16:52:54 +00:00
leds.c	MN10300: And Panasonic AM34 subarch and implement SMP	2010-10-27 17:28:55 +01:00
Makefile	MN10300: ASB2364: Add support for SMSC911X and SMC911X	2010-10-27 17:28:58 +01:00
smsc911x.c	MN10300: ASB2364: Add support for SMSC911X and SMC911X	2010-10-27 17:28:58 +01:00
unit-init.c	MN10300: Clear ASB2364 peripheral interrupt masks before enabling interrupts	2011-03-18 16:52:54 +00:00