2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 12:14:01 +08:00
linux-next/arch/arm/mach-integrator/integrator_cp.c
Linus Walleij 608914b376 ARM: integrator: restore static map on the CP
Commit 78d1632183 deleted the
static mappings of the core modules, but this static map is
still needed on the Integrator/CP (not the Integrator/AP).

Restore the static map on the Integrator/CP.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 14:58:52 -08:00

355 lines
8.8 KiB
C

/*
* linux/arch/arm/mach-integrator/integrator_cp.c
*
* Copyright (C) 2003 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/string.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/irqchip/versatile-fpga.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/sys_soc.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <mach/lm.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/timer-sp.h>
#include <plat/clcd.h>
#include <plat/sched_clock.h>
#include "cm.h"
#include "common.h"
/* Base address to the CP controller */
static void __iomem *intcp_con_base;
#define INTCP_PA_FLASH_BASE 0x24000000
#define INTCP_PA_CLCD_BASE 0xc0000000
#define INTCP_FLASHPROG 0x04
#define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
#define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
/*
* Logical Physical
* f1000000 10000000 Core module registers
* f1300000 13000000 Counter/Timer
* f1400000 14000000 Interrupt controller
* f1600000 16000000 UART 0
* f1700000 17000000 UART 1
* f1a00000 1a000000 Debug LEDs
* fc900000 c9000000 GPIO
* fca00000 ca000000 SIC
*/
static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
{
.virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}
};
static void __init intcp_map_io(void)
{
iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
}
/*
* Flash handling.
*/
static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
val |= CINTEGRATOR_FLASHPROG_FLWREN;
writel(val, intcp_con_base + INTCP_FLASHPROG);
return 0;
}
static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
if (on)
val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
else
val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static struct physmap_flash_data intcp_flash_data = {
.width = 4,
.init = intcp_flash_init,
.exit = intcp_flash_exit,
.set_vpp = intcp_flash_set_vpp,
};
/*
* It seems that the card insertion interrupt remains active after
* we've acknowledged it. We therefore ignore the interrupt, and
* rely on reading it from the SIC. This also means that we must
* clear the latched interrupt.
*/
static unsigned int mmc_status(struct device *dev)
{
unsigned int status = readl(__io_address(0xca000000 + 4));
writel(8, intcp_con_base + 8);
return status & 8;
}
static struct mmci_platform_data mmc_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,
.gpio_cd = -1,
};
/*
* CLCD support
*/
/*
* Ensure VGA is selected.
*/
static void cp_clcd_enable(struct clcd_fb *fb)
{
struct fb_var_screeninfo *var = &fb->fb.var;
u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2
| CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1;
if (var->bits_per_pixel <= 8 ||
(var->bits_per_pixel == 16 && var->green.length == 5))
/* Pseudocolor, RGB555, BGR555 */
val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
else if (fb->fb.var.bits_per_pixel <= 16)
/* truecolor RGB565 */
val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
else
val = 0; /* no idea for this, don't trust the docs */
cm_control(CM_CTRL_LCDMUXSEL_MASK|
CM_CTRL_LCDEN0|
CM_CTRL_LCDEN1|
CM_CTRL_STATIC1|
CM_CTRL_STATIC2|
CM_CTRL_STATIC|
CM_CTRL_n24BITEN, val);
}
static int cp_clcd_setup(struct clcd_fb *fb)
{
fb->panel = versatile_clcd_get_panel("VGA");
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, SZ_1M);
}
static struct clcd_board clcd_data = {
.name = "Integrator/CP",
.caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
.check = clcdfb_check,
.decode = clcdfb_decode,
.enable = cp_clcd_enable,
.setup = cp_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
static void __init intcp_init_early(void)
{
#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
versatile_sched_clock_init(REFCOUNTER, 24000000);
#endif
}
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
};
static void __init intcp_init_irq_of(void)
{
cm_init();
of_irq_init(fpga_irq_of_match);
integrator_clk_init(true);
}
/*
* For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
* and enforce the bus names since these are used for clock lookups.
*/
static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
"rtc", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
"uart0", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
"uart1", NULL),
OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
"kmi0", NULL),
OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
"kmi1", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
"mmci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
"aaci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
"clcd", &clcd_data),
OF_DEV_AUXDATA("cfi-flash", INTCP_PA_FLASH_BASE,
"physmap-flash", &intcp_flash_data),
{ /* sentinel */ },
};
static const struct of_device_id intcp_syscon_match[] = {
{ .compatible = "arm,integrator-cp-syscon"},
{ },
};
static void __init intcp_init_of(void)
{
struct device_node *root;
struct device_node *cpcon;
struct device *parent;
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
u32 intcp_sc_id;
int err;
/* Here we create an SoC device for the root node */
root = of_find_node_by_path("/");
if (!root)
return;
cpcon = of_find_matching_node(root, intcp_syscon_match);
if (!cpcon)
return;
intcp_con_base = of_iomap(cpcon, 0);
if (!intcp_con_base)
return;
intcp_sc_id = readl(intcp_con_base);
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return;
err = of_property_read_string(root, "compatible",
&soc_dev_attr->soc_id);
if (err)
return;
err = of_property_read_string(root, "model", &soc_dev_attr->machine);
if (err)
return;
soc_dev_attr->family = "Integrator";
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
'A' + (intcp_sc_id & 0x0f));
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr);
return;
}
parent = soc_device_to_device(soc_dev);
integrator_init_sysfs(parent, intcp_sc_id);
of_platform_populate(root, of_default_bus_match_table,
intcp_auxdata_lookup, parent);
}
static const char * intcp_dt_board_compat[] = {
"arm,integrator-cp",
NULL,
};
DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
.reserve = integrator_reserve,
.map_io = intcp_map_io,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq_of,
.handle_irq = fpga_handle_irq,
.init_machine = intcp_init_of,
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
MACHINE_END