2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
linux-next/drivers/net/can/sja1000/peak_pcmcia.c
Linus Torvalds 73287a43cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...
2013-05-01 14:08:52 -07:00

744 lines
18 KiB
C

/*
* Copyright (C) 2010-2012 Stephane Grosjean <s.grosjean@peak-system.com>
*
* CAN driver for PEAK-System PCAN-PC Card
* Derived from the PCAN project file driver/src/pcan_pccard.c
* Copyright (C) 2006-2010 PEAK System-Technik GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the version 2 of the GNU General Public License
* as published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/io.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <linux/can.h>
#include <linux/can/dev.h>
#include "sja1000.h"
MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
MODULE_DESCRIPTION("CAN driver for PEAK-System PCAN-PC Cards");
MODULE_LICENSE("GPL v2");
MODULE_SUPPORTED_DEVICE("PEAK PCAN-PC Card");
/* PEAK-System PCMCIA driver name */
#define PCC_NAME "peak_pcmcia"
#define PCC_CHAN_MAX 2
#define PCC_CAN_CLOCK (16000000 / 2)
#define PCC_MANF_ID 0x0377
#define PCC_CARD_ID 0x0001
#define PCC_CHAN_SIZE 0x20
#define PCC_CHAN_OFF(c) ((c) * PCC_CHAN_SIZE)
#define PCC_COMN_OFF (PCC_CHAN_OFF(PCC_CHAN_MAX))
#define PCC_COMN_SIZE 0x40
/* common area registers */
#define PCC_CCR 0x00
#define PCC_CSR 0x02
#define PCC_CPR 0x04
#define PCC_SPI_DIR 0x06
#define PCC_SPI_DOR 0x08
#define PCC_SPI_ADR 0x0a
#define PCC_SPI_IR 0x0c
#define PCC_FW_MAJOR 0x10
#define PCC_FW_MINOR 0x12
/* CCR bits */
#define PCC_CCR_CLK_16 0x00
#define PCC_CCR_CLK_10 0x01
#define PCC_CCR_CLK_21 0x02
#define PCC_CCR_CLK_8 0x03
#define PCC_CCR_CLK_MASK PCC_CCR_CLK_8
#define PCC_CCR_RST_CHAN(c) (0x01 << ((c) + 2))
#define PCC_CCR_RST_ALL (PCC_CCR_RST_CHAN(0) | PCC_CCR_RST_CHAN(1))
#define PCC_CCR_RST_MASK PCC_CCR_RST_ALL
/* led selection bits */
#define PCC_LED(c) (1 << (c))
#define PCC_LED_ALL (PCC_LED(0) | PCC_LED(1))
/* led state value */
#define PCC_LED_ON 0x00
#define PCC_LED_FAST 0x01
#define PCC_LED_SLOW 0x02
#define PCC_LED_OFF 0x03
#define PCC_CCR_LED_CHAN(s, c) ((s) << (((c) + 2) << 1))
#define PCC_CCR_LED_ON_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_ON, c)
#define PCC_CCR_LED_FAST_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_FAST, c)
#define PCC_CCR_LED_SLOW_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_SLOW, c)
#define PCC_CCR_LED_OFF_CHAN(c) PCC_CCR_LED_CHAN(PCC_LED_OFF, c)
#define PCC_CCR_LED_MASK_CHAN(c) PCC_CCR_LED_OFF_CHAN(c)
#define PCC_CCR_LED_OFF_ALL (PCC_CCR_LED_OFF_CHAN(0) | \
PCC_CCR_LED_OFF_CHAN(1))
#define PCC_CCR_LED_MASK PCC_CCR_LED_OFF_ALL
#define PCC_CCR_INIT (PCC_CCR_CLK_16 | PCC_CCR_RST_ALL | PCC_CCR_LED_OFF_ALL)
/* CSR bits */
#define PCC_CSR_SPI_BUSY 0x04
/* time waiting for SPI busy (prevent from infinite loop) */
#define PCC_SPI_MAX_BUSY_WAIT_MS 3
/* max count of reading the SPI status register waiting for a change */
/* (prevent from infinite loop) */
#define PCC_WRITE_MAX_LOOP 1000
/* max nb of int handled by that isr in one shot (prevent from infinite loop) */
#define PCC_ISR_MAX_LOOP 10
/* EEPROM chip instruction set */
/* note: EEPROM Read/Write instructions include A8 bit */
#define PCC_EEP_WRITE(a) (0x02 | (((a) & 0x100) >> 5))
#define PCC_EEP_READ(a) (0x03 | (((a) & 0x100) >> 5))
#define PCC_EEP_WRDI 0x04 /* EEPROM Write Disable */
#define PCC_EEP_RDSR 0x05 /* EEPROM Read Status Register */
#define PCC_EEP_WREN 0x06 /* EEPROM Write Enable */
/* EEPROM Status Register bits */
#define PCC_EEP_SR_WEN 0x02 /* EEPROM SR Write Enable bit */
#define PCC_EEP_SR_WIP 0x01 /* EEPROM SR Write In Progress bit */
/*
* The board configuration is probably following:
* RX1 is connected to ground.
* TX1 is not connected.
* CLKO is not connected.
* Setting the OCR register to 0xDA is a good idea.
* This means normal output mode, push-pull and the correct polarity.
*/
#define PCC_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
/*
* In the CDR register, you should set CBP to 1.
* You will probably also want to set the clock divider value to 7
* (meaning direct oscillator output) because the second SJA1000 chip
* is driven by the first one CLKOUT output.
*/
#define PCC_CDR (CDR_CBP | CDR_CLKOUT_MASK)
struct pcan_channel {
struct net_device *netdev;
unsigned long prev_rx_bytes;
unsigned long prev_tx_bytes;
};
/* PCAN-PC Card private structure */
struct pcan_pccard {
struct pcmcia_device *pdev;
int chan_count;
struct pcan_channel channel[PCC_CHAN_MAX];
u8 ccr;
u8 fw_major;
u8 fw_minor;
void __iomem *ioport_addr;
struct timer_list led_timer;
};
static struct pcmcia_device_id pcan_table[] = {
PCMCIA_DEVICE_MANF_CARD(PCC_MANF_ID, PCC_CARD_ID),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, pcan_table);
static void pcan_set_leds(struct pcan_pccard *card, u8 mask, u8 state);
/*
* start timer which controls leds state
*/
static void pcan_start_led_timer(struct pcan_pccard *card)
{
if (!timer_pending(&card->led_timer))
mod_timer(&card->led_timer, jiffies + HZ);
}
/*
* stop the timer which controls leds state
*/
static void pcan_stop_led_timer(struct pcan_pccard *card)
{
del_timer_sync(&card->led_timer);
}
/*
* read a sja1000 register
*/
static u8 pcan_read_canreg(const struct sja1000_priv *priv, int port)
{
return ioread8(priv->reg_base + port);
}
/*
* write a sja1000 register
*/
static void pcan_write_canreg(const struct sja1000_priv *priv, int port, u8 v)
{
struct pcan_pccard *card = priv->priv;
int c = (priv->reg_base - card->ioport_addr) / PCC_CHAN_SIZE;
/* sja1000 register changes control the leds state */
if (port == SJA1000_MOD)
switch (v) {
case MOD_RM:
/* Reset Mode: set led on */
pcan_set_leds(card, PCC_LED(c), PCC_LED_ON);
break;
case 0x00:
/* Normal Mode: led slow blinking and start led timer */
pcan_set_leds(card, PCC_LED(c), PCC_LED_SLOW);
pcan_start_led_timer(card);
break;
default:
break;
}
iowrite8(v, priv->reg_base + port);
}
/*
* read a register from the common area
*/
static u8 pcan_read_reg(struct pcan_pccard *card, int port)
{
return ioread8(card->ioport_addr + PCC_COMN_OFF + port);
}
/*
* write a register into the common area
*/
static void pcan_write_reg(struct pcan_pccard *card, int port, u8 v)
{
/* cache ccr value */
if (port == PCC_CCR) {
if (card->ccr == v)
return;
card->ccr = v;
}
iowrite8(v, card->ioport_addr + PCC_COMN_OFF + port);
}
/*
* check whether the card is present by checking its fw version numbers
* against values read at probing time.
*/
static inline int pcan_pccard_present(struct pcan_pccard *card)
{
return ((pcan_read_reg(card, PCC_FW_MAJOR) == card->fw_major) &&
(pcan_read_reg(card, PCC_FW_MINOR) == card->fw_minor));
}
/*
* wait for SPI engine while it is busy
*/
static int pcan_wait_spi_busy(struct pcan_pccard *card)
{
unsigned long timeout = jiffies +
msecs_to_jiffies(PCC_SPI_MAX_BUSY_WAIT_MS) + 1;
/* be sure to read status at least once after sleeping */
while (pcan_read_reg(card, PCC_CSR) & PCC_CSR_SPI_BUSY) {
if (time_after(jiffies, timeout))
return -EBUSY;
schedule();
}
return 0;
}
/*
* write data in device eeprom
*/
static int pcan_write_eeprom(struct pcan_pccard *card, u16 addr, u8 v)
{
u8 status;
int err, i;
/* write instruction enabling write */
pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WREN);
err = pcan_wait_spi_busy(card);
if (err)
goto we_spi_err;
/* wait until write enabled */
for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) {
/* write instruction reading the status register */
pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR);
err = pcan_wait_spi_busy(card);
if (err)
goto we_spi_err;
/* get status register value and check write enable bit */
status = pcan_read_reg(card, PCC_SPI_DIR);
if (status & PCC_EEP_SR_WEN)
break;
}
if (i >= PCC_WRITE_MAX_LOOP) {
dev_err(&card->pdev->dev,
"stop waiting to be allowed to write in eeprom\n");
return -EIO;
}
/* set address and data */
pcan_write_reg(card, PCC_SPI_ADR, addr & 0xff);
pcan_write_reg(card, PCC_SPI_DOR, v);
/*
* write instruction with bit[3] set according to address value:
* if addr refers to upper half of the memory array: bit[3] = 1
*/
pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRITE(addr));
err = pcan_wait_spi_busy(card);
if (err)
goto we_spi_err;
/* wait while write in progress */
for (i = 0; i < PCC_WRITE_MAX_LOOP; i++) {
/* write instruction reading the status register */
pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_RDSR);
err = pcan_wait_spi_busy(card);
if (err)
goto we_spi_err;
/* get status register value and check write in progress bit */
status = pcan_read_reg(card, PCC_SPI_DIR);
if (!(status & PCC_EEP_SR_WIP))
break;
}
if (i >= PCC_WRITE_MAX_LOOP) {
dev_err(&card->pdev->dev,
"stop waiting for write in eeprom to complete\n");
return -EIO;
}
/* write instruction disabling write */
pcan_write_reg(card, PCC_SPI_IR, PCC_EEP_WRDI);
err = pcan_wait_spi_busy(card);
if (err)
goto we_spi_err;
return 0;
we_spi_err:
dev_err(&card->pdev->dev,
"stop waiting (spi engine always busy) err %d\n", err);
return err;
}
static void pcan_set_leds(struct pcan_pccard *card, u8 led_mask, u8 state)
{
u8 ccr = card->ccr;
int i;
for (i = 0; i < card->chan_count; i++)
if (led_mask & PCC_LED(i)) {
/* clear corresponding led bits in ccr */
ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
/* then set new bits */
ccr |= PCC_CCR_LED_CHAN(state, i);
}
/* real write only if something has changed in ccr */
pcan_write_reg(card, PCC_CCR, ccr);
}
/*
* enable/disable CAN connectors power
*/
static inline void pcan_set_can_power(struct pcan_pccard *card, int onoff)
{
int err;
err = pcan_write_eeprom(card, 0, !!onoff);
if (err)
dev_err(&card->pdev->dev,
"failed setting power %s to can connectors (err %d)\n",
(onoff) ? "on" : "off", err);
}
/*
* set leds state according to channel activity
*/
static void pcan_led_timer(unsigned long arg)
{
struct pcan_pccard *card = (struct pcan_pccard *)arg;
struct net_device *netdev;
int i, up_count = 0;
u8 ccr;
ccr = card->ccr;
for (i = 0; i < card->chan_count; i++) {
/* default is: not configured */
ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
ccr |= PCC_CCR_LED_ON_CHAN(i);
netdev = card->channel[i].netdev;
if (!netdev || !(netdev->flags & IFF_UP))
continue;
up_count++;
/* no activity (but configured) */
ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
ccr |= PCC_CCR_LED_SLOW_CHAN(i);
/* if bytes counters changed, set fast blinking led */
if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) {
card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes;
ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
ccr |= PCC_CCR_LED_FAST_CHAN(i);
}
if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) {
card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes;
ccr &= ~PCC_CCR_LED_MASK_CHAN(i);
ccr |= PCC_CCR_LED_FAST_CHAN(i);
}
}
/* write the new leds state */
pcan_write_reg(card, PCC_CCR, ccr);
/* restart timer (except if no more configured channels) */
if (up_count)
mod_timer(&card->led_timer, jiffies + HZ);
}
/*
* interrupt service routine
*/
static irqreturn_t pcan_isr(int irq, void *dev_id)
{
struct pcan_pccard *card = dev_id;
int irq_handled;
/* prevent from infinite loop */
for (irq_handled = 0; irq_handled < PCC_ISR_MAX_LOOP; irq_handled++) {
/* handle shared interrupt and next loop */
int nothing_to_handle = 1;
int i;
/* check interrupt for each channel */
for (i = 0; i < card->chan_count; i++) {
struct net_device *netdev;
/*
* check whether the card is present before calling
* sja1000_interrupt() to speed up hotplug detection
*/
if (!pcan_pccard_present(card)) {
/* card unplugged during isr */
return IRQ_NONE;
}
/*
* should check whether all or SJA1000_MAX_IRQ
* interrupts have been handled: loop again to be sure.
*/
netdev = card->channel[i].netdev;
if (netdev &&
sja1000_interrupt(irq, netdev) == IRQ_HANDLED)
nothing_to_handle = 0;
}
if (nothing_to_handle)
break;
}
return (irq_handled) ? IRQ_HANDLED : IRQ_NONE;
}
/*
* free all resources used by the channels and switch off leds and can power
*/
static void pcan_free_channels(struct pcan_pccard *card)
{
int i;
u8 led_mask = 0;
for (i = 0; i < card->chan_count; i++) {
struct net_device *netdev;
char name[IFNAMSIZ];
led_mask |= PCC_LED(i);
netdev = card->channel[i].netdev;
if (!netdev)
continue;
strncpy(name, netdev->name, IFNAMSIZ);
unregister_sja1000dev(netdev);
free_sja1000dev(netdev);
dev_info(&card->pdev->dev, "%s removed\n", name);
}
/* do it only if device not removed */
if (pcan_pccard_present(card)) {
pcan_set_leds(card, led_mask, PCC_LED_OFF);
pcan_set_can_power(card, 0);
}
}
/*
* check if a CAN controller is present at the specified location
*/
static inline int pcan_channel_present(struct sja1000_priv *priv)
{
/* make sure SJA1000 is in reset mode */
pcan_write_canreg(priv, SJA1000_MOD, 1);
pcan_write_canreg(priv, SJA1000_CDR, CDR_PELICAN);
/* read reset-values */
if (pcan_read_canreg(priv, SJA1000_CDR) == CDR_PELICAN)
return 1;
return 0;
}
static int pcan_add_channels(struct pcan_pccard *card)
{
struct pcmcia_device *pdev = card->pdev;
int i, err = 0;
u8 ccr = PCC_CCR_INIT;
/* init common registers (reset channels and leds off) */
card->ccr = ~ccr;
pcan_write_reg(card, PCC_CCR, ccr);
/* wait 2ms before unresetting channels */
mdelay(2);
ccr &= ~PCC_CCR_RST_ALL;
pcan_write_reg(card, PCC_CCR, ccr);
/* create one network device per channel detected */
for (i = 0; i < ARRAY_SIZE(card->channel); i++) {
struct net_device *netdev;
struct sja1000_priv *priv;
netdev = alloc_sja1000dev(0);
if (!netdev) {
err = -ENOMEM;
break;
}
/* update linkages */
priv = netdev_priv(netdev);
priv->priv = card;
SET_NETDEV_DEV(netdev, &pdev->dev);
priv->irq_flags = IRQF_SHARED;
netdev->irq = pdev->irq;
priv->reg_base = card->ioport_addr + PCC_CHAN_OFF(i);
/* check if channel is present */
if (!pcan_channel_present(priv)) {
dev_err(&pdev->dev, "channel %d not present\n", i);
free_sja1000dev(netdev);
continue;
}
priv->read_reg = pcan_read_canreg;
priv->write_reg = pcan_write_canreg;
priv->can.clock.freq = PCC_CAN_CLOCK;
priv->ocr = PCC_OCR;
priv->cdr = PCC_CDR;
/* Neither a slave device distributes the clock */
if (i > 0)
priv->cdr |= CDR_CLK_OFF;
priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER;
/* register SJA1000 device */
err = register_sja1000dev(netdev);
if (err) {
free_sja1000dev(netdev);
continue;
}
card->channel[i].netdev = netdev;
card->chan_count++;
/* set corresponding led on in the new ccr */
ccr &= ~PCC_CCR_LED_OFF_CHAN(i);
dev_info(&pdev->dev,
"%s on channel %d at 0x%p irq %d\n",
netdev->name, i, priv->reg_base, pdev->irq);
}
/* write new ccr (change leds state) */
pcan_write_reg(card, PCC_CCR, ccr);
return err;
}
static int pcan_conf_check(struct pcmcia_device *pdev, void *priv_data)
{
pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* only */
pdev->io_lines = 10;
/* This reserves IO space but doesn't actually enable it */
return pcmcia_request_io(pdev);
}
/*
* free all resources used by the device
*/
static void pcan_free(struct pcmcia_device *pdev)
{
struct pcan_pccard *card = pdev->priv;
if (!card)
return;
free_irq(pdev->irq, card);
pcan_stop_led_timer(card);
pcan_free_channels(card);
ioport_unmap(card->ioport_addr);
kfree(card);
pdev->priv = NULL;
}
/*
* setup PCMCIA socket and probe for PEAK-System PC-CARD
*/
static int pcan_probe(struct pcmcia_device *pdev)
{
struct pcan_pccard *card;
int err;
pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
err = pcmcia_loop_config(pdev, pcan_conf_check, NULL);
if (err) {
dev_err(&pdev->dev, "pcmcia_loop_config() error %d\n", err);
goto probe_err_1;
}
if (!pdev->irq) {
dev_err(&pdev->dev, "no irq assigned\n");
err = -ENODEV;
goto probe_err_1;
}
err = pcmcia_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "pcmcia_enable_device failed err=%d\n",
err);
goto probe_err_1;
}
card = kzalloc(sizeof(struct pcan_pccard), GFP_KERNEL);
if (!card) {
err = -ENOMEM;
goto probe_err_2;
}
card->pdev = pdev;
pdev->priv = card;
/* sja1000 api uses iomem */
card->ioport_addr = ioport_map(pdev->resource[0]->start,
resource_size(pdev->resource[0]));
if (!card->ioport_addr) {
dev_err(&pdev->dev, "couldn't map io port into io memory\n");
err = -ENOMEM;
goto probe_err_3;
}
card->fw_major = pcan_read_reg(card, PCC_FW_MAJOR);
card->fw_minor = pcan_read_reg(card, PCC_FW_MINOR);
/* display board name and firware version */
dev_info(&pdev->dev, "PEAK-System pcmcia card %s fw %d.%d\n",
pdev->prod_id[1] ? pdev->prod_id[1] : "PCAN-PC Card",
card->fw_major, card->fw_minor);
/* detect available channels */
pcan_add_channels(card);
if (!card->chan_count) {
err = -ENOMEM;
goto probe_err_4;
}
/* init the timer which controls the leds */
init_timer(&card->led_timer);
card->led_timer.function = pcan_led_timer;
card->led_timer.data = (unsigned long)card;
/* request the given irq */
err = request_irq(pdev->irq, &pcan_isr, IRQF_SHARED, PCC_NAME, card);
if (err) {
dev_err(&pdev->dev, "couldn't request irq%d\n", pdev->irq);
goto probe_err_5;
}
/* power on the connectors */
pcan_set_can_power(card, 1);
return 0;
probe_err_5:
/* unregister can devices from network */
pcan_free_channels(card);
probe_err_4:
ioport_unmap(card->ioport_addr);
probe_err_3:
kfree(card);
pdev->priv = NULL;
probe_err_2:
pcmcia_disable_device(pdev);
probe_err_1:
return err;
}
/*
* release claimed resources
*/
static void pcan_remove(struct pcmcia_device *pdev)
{
pcan_free(pdev);
pcmcia_disable_device(pdev);
}
static struct pcmcia_driver pcan_driver = {
.name = PCC_NAME,
.probe = pcan_probe,
.remove = pcan_remove,
.id_table = pcan_table,
};
module_pcmcia_driver(pcan_driver);