2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
linux-next/include/linux/usbdevice_fs.h
Alan Stern 01c6460f96 USB: usbfs: add USBDEVFS_URB_BULK_CONTINUATION flag
This patch (as1283) adds a new flag, USBDEVFS_URB_BULK_CONTINUATION,
to usbfs.  It is intended for userspace libraries such as libusb and
openusb.  When they have to break up a single usbfs bulk transfer into
multiple URBs, they will set the flag on all but the first URB of the
series.

If an error other than an unlink occurs, the kernel will automatically
cancel all the following URBs for the same endpoint and refuse to
accept new submissions, until an URB is encountered that is not marked
as a BULK_CONTINUATION.  Such an URB would indicate the start of a new
transfer or the presence of an older library, so the kernel returns to
normal operation.

This enables libraries to delimit bulk transfers correctly, even in
the presence of early termination as indicated by short packets.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:39 -07:00

182 lines
5.6 KiB
C

/*****************************************************************************/
/*
* usbdevice_fs.h -- USB device file system.
*
* Copyright (C) 2000
* Thomas Sailer (sailer@ife.ee.ethz.ch)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* History:
* 0.1 04.01.2000 Created
*/
/*****************************************************************************/
#ifndef _LINUX_USBDEVICE_FS_H
#define _LINUX_USBDEVICE_FS_H
#include <linux/types.h>
#include <linux/magic.h>
/* --------------------------------------------------------------------- */
/* usbdevfs ioctl codes */
struct usbdevfs_ctrltransfer {
__u8 bRequestType;
__u8 bRequest;
__u16 wValue;
__u16 wIndex;
__u16 wLength;
__u32 timeout; /* in milliseconds */
void __user *data;
};
struct usbdevfs_bulktransfer {
unsigned int ep;
unsigned int len;
unsigned int timeout; /* in milliseconds */
void __user *data;
};
struct usbdevfs_setinterface {
unsigned int interface;
unsigned int altsetting;
};
struct usbdevfs_disconnectsignal {
unsigned int signr;
void __user *context;
};
#define USBDEVFS_MAXDRIVERNAME 255
struct usbdevfs_getdriver {
unsigned int interface;
char driver[USBDEVFS_MAXDRIVERNAME + 1];
};
struct usbdevfs_connectinfo {
unsigned int devnum;
unsigned char slow;
};
#define USBDEVFS_URB_SHORT_NOT_OK 0x01
#define USBDEVFS_URB_ISO_ASAP 0x02
#define USBDEVFS_URB_BULK_CONTINUATION 0x04
#define USBDEVFS_URB_NO_FSBR 0x20
#define USBDEVFS_URB_ZERO_PACKET 0x40
#define USBDEVFS_URB_NO_INTERRUPT 0x80
#define USBDEVFS_URB_TYPE_ISO 0
#define USBDEVFS_URB_TYPE_INTERRUPT 1
#define USBDEVFS_URB_TYPE_CONTROL 2
#define USBDEVFS_URB_TYPE_BULK 3
struct usbdevfs_iso_packet_desc {
unsigned int length;
unsigned int actual_length;
unsigned int status;
};
struct usbdevfs_urb {
unsigned char type;
unsigned char endpoint;
int status;
unsigned int flags;
void __user *buffer;
int buffer_length;
int actual_length;
int start_frame;
int number_of_packets;
int error_count;
unsigned int signr; /* signal to be sent on completion,
or 0 if none should be sent. */
void __user *usercontext;
struct usbdevfs_iso_packet_desc iso_frame_desc[0];
};
/* ioctls for talking directly to drivers */
struct usbdevfs_ioctl {
int ifno; /* interface 0..N ; negative numbers reserved */
int ioctl_code; /* MUST encode size + direction of data so the
* macros in <asm/ioctl.h> give correct values */
void __user *data; /* param buffer (in, or out) */
};
/* You can do most things with hubs just through control messages,
* except find out what device connects to what port. */
struct usbdevfs_hub_portinfo {
char nports; /* number of downstream ports in this hub */
char port [127]; /* e.g. port 3 connects to device 27 */
};
#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
struct usbdevfs_urb32 {
unsigned char type;
unsigned char endpoint;
compat_int_t status;
compat_uint_t flags;
compat_caddr_t buffer;
compat_int_t buffer_length;
compat_int_t actual_length;
compat_int_t start_frame;
compat_int_t number_of_packets;
compat_int_t error_count;
compat_uint_t signr;
compat_caddr_t usercontext; /* unused */
struct usbdevfs_iso_packet_desc iso_frame_desc[0];
};
struct usbdevfs_ioctl32 {
s32 ifno;
s32 ioctl_code;
compat_caddr_t data;
};
#endif
#endif /* __KERNEL__ */
#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer)
#define USBDEVFS_BULK _IOWR('U', 2, struct usbdevfs_bulktransfer)
#define USBDEVFS_RESETEP _IOR('U', 3, unsigned int)
#define USBDEVFS_SETINTERFACE _IOR('U', 4, struct usbdevfs_setinterface)
#define USBDEVFS_SETCONFIGURATION _IOR('U', 5, unsigned int)
#define USBDEVFS_GETDRIVER _IOW('U', 8, struct usbdevfs_getdriver)
#define USBDEVFS_SUBMITURB _IOR('U', 10, struct usbdevfs_urb)
#define USBDEVFS_SUBMITURB32 _IOR('U', 10, struct usbdevfs_urb32)
#define USBDEVFS_DISCARDURB _IO('U', 11)
#define USBDEVFS_REAPURB _IOW('U', 12, void *)
#define USBDEVFS_REAPURB32 _IOW('U', 12, __u32)
#define USBDEVFS_REAPURBNDELAY _IOW('U', 13, void *)
#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, __u32)
#define USBDEVFS_DISCSIGNAL _IOR('U', 14, struct usbdevfs_disconnectsignal)
#define USBDEVFS_CLAIMINTERFACE _IOR('U', 15, unsigned int)
#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int)
#define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo)
#define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl)
#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32)
#define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo)
#define USBDEVFS_RESET _IO('U', 20)
#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int)
#define USBDEVFS_DISCONNECT _IO('U', 22)
#define USBDEVFS_CONNECT _IO('U', 23)
#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int)
#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int)
#endif /* _LINUX_USBDEVICE_FS_H */