Ian Munsie b385c9e971 cxl: Add support for CAPP DMA mode ... This adds support for using CAPP DMA mode, which is required for XSL based cards such as the Mellanox CX4 to function. This is currently an RFC as it depends on the corresponding support to be merged into skiboot first, which was submitted here: http://patchwork.ozlabs.org/patch/625582/ In the event that the skiboot on the system does not have the above support, it will indicate as such in the kernel log and abort the init process. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>		2016-06-16 23:10:26 +10:00
..
eeh-powernv.c	Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()"	2016-05-12 19:43:37 +10:00
idle.c	powerpc/sparse: make some things static	2016-06-16 22:23:11 +10:00
Kconfig	powerpc/powernv: Add opal-prd channel	2015-06-05 08:32:21 +10:00
Makefile	powerpc/powernv: Remove support for p5ioc2	2016-02-08 22:03:37 +11:00
npu-dma.c	powerpc/powernv/npu: Enable NVLink pass through	2016-05-11 21:54:31 +10:00
opal-async.c	powerpc/powernv: Reorder OPAL subsystem initialisation	2015-05-22 15:14:37 +10:00
opal-dump.c	powernv/opal-dump: Convert to irq domain	2015-05-22 15:14:38 +10:00
opal-elog.c	powerpc/powernv: Fix opal-elog interrupt handler	2015-07-06 20:24:36 +10:00
opal-flash.c	powerpc/powernv: Add interfaces for flash device access	2015-04-11 20:49:21 +10:00
opal-hmi.c	powerpc/powernv: Use the "unknown" checkstop type as a fallback	2016-04-11 20:30:40 +10:00
opal-irqchip.c	powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"	2015-12-18 22:24:15 +11:00
opal-kmsg.c	powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages	2016-01-13 12:35:17 +11:00
opal-lpc.c	powerpc/powernv: Properly fix LPC debugfs endianness	2014-10-31 17:09:04 +11:00
opal-memory-errors.c	powerpc/powernv: Reorder OPAL subsystem initialisation	2015-05-22 15:14:37 +10:00
opal-msglog.c	powerpc/powernv: don't create OPAL msglog sysfs entry if memcons init fails	2016-02-22 20:31:55 +11:00
opal-nvram.c	powerpc/powernv: Add pstore support on powernv	2015-03-23 14:06:10 +11:00
opal-power.c	powerpc/powernv: Add poweroff (EPOW, DPO) events support for PowerNV platform	2015-07-16 13:34:36 +10:00
opal-prd.c	powerpc/powernv: Drop owner assignment from platform_driver	2015-11-24 14:21:28 +11:00
opal-rtc.c	powerpc/powernv: Only delay opal_rtc_read() retry when necessary	2015-12-27 19:12:40 +11:00
opal-sensor.c	powerpc/powernv: Reorder OPAL subsystem initialisation	2015-05-22 15:14:37 +10:00
opal-sysparam.c	powerpc/powernv: convert OPAL codes returned by sysparam calls	2015-06-04 22:27:56 +10:00
opal-tracepoints.c	powerpc: Introduce asm-prototypes.h	2016-06-16 22:39:54 +10:00
opal-wrappers.S	powerpc/powernv: Add a kmsg_dumper that flushes console output on panic	2015-12-27 19:12:40 +11:00
opal-xscom.c	powerpc/powernv: remove FW_FEATURE_OPALv3 and just use FW_FEATURE_OPAL	2015-12-17 22:40:54 +11:00
opal.c	powerpc/powernv: new function to access OPAL msglog	2016-02-09 20:27:04 +11:00
pci-ioda.c	cxl: Add support for CAPP DMA mode	2016-06-16 23:10:26 +10:00
pci.c	powerpc/powernv: Data type unsigned int for PE number	2016-05-11 21:54:17 +10:00
pci.h	powerpc/powernv/npu: Enable NVLink pass through	2016-05-11 21:54:31 +10:00
powernv.h	powerpc/powernv: move dma_get_required_mask from pnv_phb to pci_controller_ops	2015-08-18 19:32:11 +10:00
rng.c	powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*	2015-07-23 19:52:03 +10:00
setup.c	powerpc/mm/radix: Add radix callbacks for early init routines	2016-05-01 18:33:00 +10:00
smp.c	powerpc/powernv: remove FW_FEATURE_OPALv3 and just use FW_FEATURE_OPAL	2015-12-17 22:40:54 +11:00
subcore-asm.S	powerpc/powernv: Add support for POWER8 split core on powernv	2014-05-28 13:35:37 +10:00
subcore.c	powerpc/powernv: Create separate subcores CPU feature bit	2016-02-22 20:47:46 +11:00
subcore.h	powernv/powerpc: Add winkle support for offline cpus	2014-12-15 10:46:41 +11:00