mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
947a0687d1
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
228 lines
5.7 KiB
C
228 lines
5.7 KiB
C
/*
|
|
* Copyright (C) 2013 Aeroflex Gaisler
|
|
*
|
|
* This driver supports the APBPS2 PS/2 core available in the GRLIB
|
|
* VHDL IP core library.
|
|
*
|
|
* Full documentation of the APBPS2 core can be found here:
|
|
* http://www.gaisler.com/products/grlib/grip.pdf
|
|
*
|
|
* See "Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt" for
|
|
* information on open firmware properties.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Contributors: Daniel Hellstrom <daniel@gaisler.com>
|
|
*/
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/serio.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/io.h>
|
|
|
|
struct apbps2_regs {
|
|
u32 __iomem data; /* 0x00 */
|
|
u32 __iomem status; /* 0x04 */
|
|
u32 __iomem ctrl; /* 0x08 */
|
|
u32 __iomem reload; /* 0x0c */
|
|
};
|
|
|
|
#define APBPS2_STATUS_DR (1<<0)
|
|
#define APBPS2_STATUS_PE (1<<1)
|
|
#define APBPS2_STATUS_FE (1<<2)
|
|
#define APBPS2_STATUS_KI (1<<3)
|
|
#define APBPS2_STATUS_RF (1<<4)
|
|
#define APBPS2_STATUS_TF (1<<5)
|
|
#define APBPS2_STATUS_TCNT (0x1f<<22)
|
|
#define APBPS2_STATUS_RCNT (0x1f<<27)
|
|
|
|
#define APBPS2_CTRL_RE (1<<0)
|
|
#define APBPS2_CTRL_TE (1<<1)
|
|
#define APBPS2_CTRL_RI (1<<2)
|
|
#define APBPS2_CTRL_TI (1<<3)
|
|
|
|
struct apbps2_priv {
|
|
struct serio *io;
|
|
struct apbps2_regs *regs;
|
|
};
|
|
|
|
static int apbps2_idx;
|
|
|
|
static irqreturn_t apbps2_isr(int irq, void *dev_id)
|
|
{
|
|
struct apbps2_priv *priv = dev_id;
|
|
unsigned long status, data, rxflags;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
while ((status = ioread32be(&priv->regs->status)) & APBPS2_STATUS_DR) {
|
|
data = ioread32be(&priv->regs->data);
|
|
rxflags = (status & APBPS2_STATUS_PE) ? SERIO_PARITY : 0;
|
|
rxflags |= (status & APBPS2_STATUS_FE) ? SERIO_FRAME : 0;
|
|
|
|
/* clear error bits? */
|
|
if (rxflags)
|
|
iowrite32be(0, &priv->regs->status);
|
|
|
|
serio_interrupt(priv->io, data, rxflags);
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int apbps2_write(struct serio *io, unsigned char val)
|
|
{
|
|
struct apbps2_priv *priv = io->port_data;
|
|
unsigned int tleft = 10000; /* timeout in 100ms */
|
|
|
|
/* delay until PS/2 controller has room for more chars */
|
|
while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_TF) && tleft--)
|
|
udelay(10);
|
|
|
|
if ((ioread32be(&priv->regs->status) & APBPS2_STATUS_TF) == 0) {
|
|
iowrite32be(val, &priv->regs->data);
|
|
|
|
iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI | APBPS2_CTRL_TE,
|
|
&priv->regs->ctrl);
|
|
return 0;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int apbps2_open(struct serio *io)
|
|
{
|
|
struct apbps2_priv *priv = io->port_data;
|
|
int limit;
|
|
unsigned long tmp;
|
|
|
|
/* clear error flags */
|
|
iowrite32be(0, &priv->regs->status);
|
|
|
|
/* Clear old data if available (unlikely) */
|
|
limit = 1024;
|
|
while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_DR) && --limit)
|
|
tmp = ioread32be(&priv->regs->data);
|
|
|
|
/* Enable reciever and it's interrupt */
|
|
iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI, &priv->regs->ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void apbps2_close(struct serio *io)
|
|
{
|
|
struct apbps2_priv *priv = io->port_data;
|
|
|
|
/* stop interrupts at PS/2 HW level */
|
|
iowrite32be(0, &priv->regs->ctrl);
|
|
}
|
|
|
|
/* Initialize one APBPS2 PS/2 core */
|
|
static int apbps2_of_probe(struct platform_device *ofdev)
|
|
{
|
|
struct apbps2_priv *priv;
|
|
int irq, err;
|
|
u32 freq_hz;
|
|
struct resource *res;
|
|
|
|
priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(&ofdev->dev, "memory allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Find Device Address */
|
|
res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
|
|
priv->regs = devm_ioremap_resource(&ofdev->dev, res);
|
|
if (IS_ERR(priv->regs))
|
|
return PTR_ERR(priv->regs);
|
|
|
|
/* Reset hardware, disable interrupt */
|
|
iowrite32be(0, &priv->regs->ctrl);
|
|
|
|
/* IRQ */
|
|
irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
|
|
err = devm_request_irq(&ofdev->dev, irq, apbps2_isr,
|
|
IRQF_SHARED, "apbps2", priv);
|
|
if (err) {
|
|
dev_err(&ofdev->dev, "request IRQ%d failed\n", irq);
|
|
return err;
|
|
}
|
|
|
|
/* Get core frequency */
|
|
if (of_property_read_u32(ofdev->dev.of_node, "freq", &freq_hz)) {
|
|
dev_err(&ofdev->dev, "unable to get core frequency\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set reload register to core freq in kHz/10 */
|
|
iowrite32be(freq_hz / 10000, &priv->regs->reload);
|
|
|
|
priv->io = kzalloc(sizeof(struct serio), GFP_KERNEL);
|
|
if (!priv->io)
|
|
return -ENOMEM;
|
|
|
|
priv->io->id.type = SERIO_8042;
|
|
priv->io->open = apbps2_open;
|
|
priv->io->close = apbps2_close;
|
|
priv->io->write = apbps2_write;
|
|
priv->io->port_data = priv;
|
|
strlcpy(priv->io->name, "APBPS2 PS/2", sizeof(priv->io->name));
|
|
snprintf(priv->io->phys, sizeof(priv->io->phys),
|
|
"apbps2_%d", apbps2_idx++);
|
|
|
|
dev_info(&ofdev->dev, "irq = %d, base = 0x%p\n", irq, priv->regs);
|
|
|
|
serio_register_port(priv->io);
|
|
|
|
platform_set_drvdata(ofdev, priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int apbps2_of_remove(struct platform_device *of_dev)
|
|
{
|
|
struct apbps2_priv *priv = platform_get_drvdata(of_dev);
|
|
|
|
serio_unregister_port(priv->io);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id apbps2_of_match[] = {
|
|
{ .name = "GAISLER_APBPS2", },
|
|
{ .name = "01_060", },
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, apbps2_of_match);
|
|
|
|
static struct platform_driver apbps2_of_driver = {
|
|
.driver = {
|
|
.name = "grlib-apbps2",
|
|
.of_match_table = apbps2_of_match,
|
|
},
|
|
.probe = apbps2_of_probe,
|
|
.remove = apbps2_of_remove,
|
|
};
|
|
|
|
module_platform_driver(apbps2_of_driver);
|
|
|
|
MODULE_AUTHOR("Aeroflex Gaisler AB.");
|
|
MODULE_DESCRIPTION("GRLIB APBPS2 PS/2 serial I/O");
|
|
MODULE_LICENSE("GPL");
|