mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
ff2d339375
Document the different needs of documentation for the b53 driver. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
184 lines
5.2 KiB
ReStructuredText
184 lines
5.2 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
==========================================
|
|
Broadcom RoboSwitch Ethernet switch driver
|
|
==========================================
|
|
|
|
The Broadcom RoboSwitch Ethernet switch family is used in quite a range of
|
|
xDSL router, cable modems and other multimedia devices.
|
|
|
|
The actual implementation supports the devices BCM5325E, BCM5365, BCM539x,
|
|
BCM53115 and BCM53125 as well as BCM63XX.
|
|
|
|
Implementation details
|
|
======================
|
|
|
|
The driver is located in ``drivers/net/dsa/b53/`` and is implemented as a
|
|
DSA driver; see ``Documentation/networking/dsa/dsa.rst`` for details on the
|
|
subsystem and what it provides.
|
|
|
|
The switch is, if possible, configured to enable a Broadcom specific 4-bytes
|
|
switch tag which gets inserted by the switch for every packet forwarded to the
|
|
CPU interface, conversely, the CPU network interface should insert a similar
|
|
tag for packets entering the CPU port. The tag format is described in
|
|
``net/dsa/tag_brcm.c``.
|
|
|
|
The configuration of the device depends on whether or not tagging is
|
|
supported.
|
|
|
|
The interface names and example network configuration are used according the
|
|
configuration described in the :ref:`dsa-config-showcases`.
|
|
|
|
Configuration with tagging support
|
|
----------------------------------
|
|
|
|
The tagging based configuration is desired. It is not specific to the b53
|
|
DSA driver and will work like all DSA drivers which supports tagging.
|
|
|
|
See :ref:`dsa-tagged-configuration`.
|
|
|
|
Configuration without tagging support
|
|
-------------------------------------
|
|
|
|
Older models (5325, 5365) support a different tag format that is not supported
|
|
yet. 539x and 531x5 require managed mode and some special handling, which is
|
|
also not yet supported. The tagging support is disabled in these cases and the
|
|
switch need a different configuration.
|
|
|
|
The configuration slightly differ from the :ref:`dsa-vlan-configuration`.
|
|
|
|
The b53 tags the CPU port in all VLANs, since otherwise any PVID untagged
|
|
VLAN programming would basically change the CPU port's default PVID and make
|
|
it untagged, undesirable.
|
|
|
|
In difference to the configuration described in :ref:`dsa-vlan-configuration`
|
|
the default VLAN 1 has to be removed from the slave interface configuration in
|
|
single port and gateway configuration, while there is no need to add an extra
|
|
VLAN configuration in the bridge showcase.
|
|
|
|
single port
|
|
~~~~~~~~~~~
|
|
The configuration can only be set up via VLAN tagging and bridge setup.
|
|
By default packages are tagged with vid 1:
|
|
|
|
.. code-block:: sh
|
|
|
|
# tag traffic on CPU port
|
|
ip link add link eth0 name eth0.1 type vlan id 1
|
|
ip link add link eth0 name eth0.2 type vlan id 2
|
|
ip link add link eth0 name eth0.3 type vlan id 3
|
|
|
|
# The master interface needs to be brought up before the slave ports.
|
|
ip link set eth0 up
|
|
ip link set eth0.1 up
|
|
ip link set eth0.2 up
|
|
ip link set eth0.3 up
|
|
|
|
# bring up the slave interfaces
|
|
ip link set wan up
|
|
ip link set lan1 up
|
|
ip link set lan2 up
|
|
|
|
# create bridge
|
|
ip link add name br0 type bridge
|
|
|
|
# activate VLAN filtering
|
|
ip link set dev br0 type bridge vlan_filtering 1
|
|
|
|
# add ports to bridges
|
|
ip link set dev wan master br0
|
|
ip link set dev lan1 master br0
|
|
ip link set dev lan2 master br0
|
|
|
|
# tag traffic on ports
|
|
bridge vlan add dev lan1 vid 2 pvid untagged
|
|
bridge vlan del dev lan1 vid 1
|
|
bridge vlan add dev lan2 vid 3 pvid untagged
|
|
bridge vlan del dev lan2 vid 1
|
|
|
|
# configure the VLANs
|
|
ip addr add 192.0.2.1/30 dev eth0.1
|
|
ip addr add 192.0.2.5/30 dev eth0.2
|
|
ip addr add 192.0.2.9/30 dev eth0.3
|
|
|
|
# bring up the bridge devices
|
|
ip link set br0 up
|
|
|
|
|
|
bridge
|
|
~~~~~~
|
|
|
|
.. code-block:: sh
|
|
|
|
# tag traffic on CPU port
|
|
ip link add link eth0 name eth0.1 type vlan id 1
|
|
|
|
# The master interface needs to be brought up before the slave ports.
|
|
ip link set eth0 up
|
|
ip link set eth0.1 up
|
|
|
|
# bring up the slave interfaces
|
|
ip link set wan up
|
|
ip link set lan1 up
|
|
ip link set lan2 up
|
|
|
|
# create bridge
|
|
ip link add name br0 type bridge
|
|
|
|
# activate VLAN filtering
|
|
ip link set dev br0 type bridge vlan_filtering 1
|
|
|
|
# add ports to bridge
|
|
ip link set dev wan master br0
|
|
ip link set dev lan1 master br0
|
|
ip link set dev lan2 master br0
|
|
ip link set eth0.1 master br0
|
|
|
|
# configure the bridge
|
|
ip addr add 192.0.2.129/25 dev br0
|
|
|
|
# bring up the bridge
|
|
ip link set dev br0 up
|
|
|
|
gateway
|
|
~~~~~~~
|
|
|
|
.. code-block:: sh
|
|
|
|
# tag traffic on CPU port
|
|
ip link add link eth0 name eth0.1 type vlan id 1
|
|
ip link add link eth0 name eth0.2 type vlan id 2
|
|
|
|
# The master interface needs to be brought up before the slave ports.
|
|
ip link set eth0 up
|
|
ip link set eth0.1 up
|
|
ip link set eth0.2 up
|
|
|
|
# bring up the slave interfaces
|
|
ip link set wan up
|
|
ip link set lan1 up
|
|
ip link set lan2 up
|
|
|
|
# create bridge
|
|
ip link add name br0 type bridge
|
|
|
|
# activate VLAN filtering
|
|
ip link set dev br0 type bridge vlan_filtering 1
|
|
|
|
# add ports to bridges
|
|
ip link set dev wan master br0
|
|
ip link set eth0.1 master br0
|
|
ip link set dev lan1 master br0
|
|
ip link set dev lan2 master br0
|
|
|
|
# tag traffic on ports
|
|
bridge vlan add dev wan vid 2 pvid untagged
|
|
bridge vlan del dev wan vid 1
|
|
|
|
# configure the VLANs
|
|
ip addr add 192.0.2.1/30 dev eth0.2
|
|
ip addr add 192.0.2.129/25 dev br0
|
|
|
|
# bring up the bridge devices
|
|
ip link set br0 up
|