mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 05:04:00 +08:00
3b1a94c88b
The dm-zoned device mapper target provides transparent write access to zoned block devices (ZBC and ZAC compliant block devices). dm-zoned hides to the device user (a file system or an application doing raw block device accesses) any constraint imposed on write requests by the device, equivalent to a drive-managed zoned block device model. Write requests are processed using a combination of on-disk buffering using the device conventional zones and direct in-place processing for requests aligned to a zone sequential write pointer position. A background reclaim process implemented using dm_kcopyd_copy ensures that conventional zones are always available for executing unaligned write requests. The reclaim process overhead is minimized by managing buffer zones in a least-recently-written order and first targeting the oldest buffer zones. Doing so, blocks under regular write access (such as metadata blocks of a file system) remain stored in conventional zones, resulting in no apparent overhead. dm-zoned implementation focus on simplicity and on minimizing overhead (CPU, memory and storage overhead). For a 14TB host-managed disk with 256 MB zones, dm-zoned memory usage per disk instance is at most about 3 MB and as little as 5 zones will be used internally for storing metadata and performing buffer zone reclaim operations. This is achieved using zone level indirection rather than a full block indirection system for managing block movement between zones. dm-zoned primary target is host-managed zoned block devices but it can also be used with host-aware device models to mitigate potential device-side performance degradation due to excessive random writing. Zoned block devices can be formatted and checked for use with the dm-zoned target using the dmzadm utility available at: https://github.com/hgst/dm-zoned-tools Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [Mike Snitzer partly refactored Damien's original work to cleanup the code] Signed-off-by: Mike Snitzer <snitzer@redhat.com>
145 lines
6.6 KiB
Plaintext
145 lines
6.6 KiB
Plaintext
dm-zoned
|
|
========
|
|
|
|
The dm-zoned device mapper target exposes a zoned block device (ZBC and
|
|
ZAC compliant devices) as a regular block device without any write
|
|
pattern constraints. In effect, it implements a drive-managed zoned
|
|
block device which hides from the user (a file system or an application
|
|
doing raw block device accesses) the sequential write constraints of
|
|
host-managed zoned block devices and can mitigate the potential
|
|
device-side performance degradation due to excessive random writes on
|
|
host-aware zoned block devices.
|
|
|
|
For a more detailed description of the zoned block device models and
|
|
their constraints see (for SCSI devices):
|
|
|
|
http://www.t10.org/drafts.htm#ZBC_Family
|
|
|
|
and (for ATA devices):
|
|
|
|
http://www.t13.org/Documents/UploadedDocuments/docs2015/di537r05-Zoned_Device_ATA_Command_Set_ZAC.pdf
|
|
|
|
The dm-zoned implementation is simple and minimizes system overhead (CPU
|
|
and memory usage as well as storage capacity loss). For a 10TB
|
|
host-managed disk with 256 MB zones, dm-zoned memory usage per disk
|
|
instance is at most 4.5 MB and as little as 5 zones will be used
|
|
internally for storing metadata and performaing reclaim operations.
|
|
|
|
dm-zoned target devices are formatted and checked using the dmzadm
|
|
utility available at:
|
|
|
|
https://github.com/hgst/dm-zoned-tools
|
|
|
|
Algorithm
|
|
=========
|
|
|
|
dm-zoned implements an on-disk buffering scheme to handle non-sequential
|
|
write accesses to the sequential zones of a zoned block device.
|
|
Conventional zones are used for caching as well as for storing internal
|
|
metadata.
|
|
|
|
The zones of the device are separated into 2 types:
|
|
|
|
1) Metadata zones: these are conventional zones used to store metadata.
|
|
Metadata zones are not reported as useable capacity to the user.
|
|
|
|
2) Data zones: all remaining zones, the vast majority of which will be
|
|
sequential zones used exclusively to store user data. The conventional
|
|
zones of the device may be used also for buffering user random writes.
|
|
Data in these zones may be directly mapped to the conventional zone, but
|
|
later moved to a sequential zone so that the conventional zone can be
|
|
reused for buffering incoming random writes.
|
|
|
|
dm-zoned exposes a logical device with a sector size of 4096 bytes,
|
|
irrespective of the physical sector size of the backend zoned block
|
|
device being used. This allows reducing the amount of metadata needed to
|
|
manage valid blocks (blocks written).
|
|
|
|
The on-disk metadata format is as follows:
|
|
|
|
1) The first block of the first conventional zone found contains the
|
|
super block which describes the on disk amount and position of metadata
|
|
blocks.
|
|
|
|
2) Following the super block, a set of blocks is used to describe the
|
|
mapping of the logical device blocks. The mapping is done per chunk of
|
|
blocks, with the chunk size equal to the zoned block device size. The
|
|
mapping table is indexed by chunk number and each mapping entry
|
|
indicates the zone number of the device storing the chunk of data. Each
|
|
mapping entry may also indicate if the zone number of a conventional
|
|
zone used to buffer random modification to the data zone.
|
|
|
|
3) A set of blocks used to store bitmaps indicating the validity of
|
|
blocks in the data zones follows the mapping table. A valid block is
|
|
defined as a block that was written and not discarded. For a buffered
|
|
data chunk, a block is always valid only in the data zone mapping the
|
|
chunk or in the buffer zone of the chunk.
|
|
|
|
For a logical chunk mapped to a conventional zone, all write operations
|
|
are processed by directly writing to the zone. If the mapping zone is a
|
|
sequential zone, the write operation is processed directly only if the
|
|
write offset within the logical chunk is equal to the write pointer
|
|
offset within of the sequential data zone (i.e. the write operation is
|
|
aligned on the zone write pointer). Otherwise, write operations are
|
|
processed indirectly using a buffer zone. In that case, an unused
|
|
conventional zone is allocated and assigned to the chunk being
|
|
accessed. Writing a block to the buffer zone of a chunk will
|
|
automatically invalidate the same block in the sequential zone mapping
|
|
the chunk. If all blocks of the sequential zone become invalid, the zone
|
|
is freed and the chunk buffer zone becomes the primary zone mapping the
|
|
chunk, resulting in native random write performance similar to a regular
|
|
block device.
|
|
|
|
Read operations are processed according to the block validity
|
|
information provided by the bitmaps. Valid blocks are read either from
|
|
the sequential zone mapping a chunk, or if the chunk is buffered, from
|
|
the buffer zone assigned. If the accessed chunk has no mapping, or the
|
|
accessed blocks are invalid, the read buffer is zeroed and the read
|
|
operation terminated.
|
|
|
|
After some time, the limited number of convnetional zones available may
|
|
be exhausted (all used to map chunks or buffer sequential zones) and
|
|
unaligned writes to unbuffered chunks become impossible. To avoid this
|
|
situation, a reclaim process regularly scans used conventional zones and
|
|
tries to reclaim the least recently used zones by copying the valid
|
|
blocks of the buffer zone to a free sequential zone. Once the copy
|
|
completes, the chunk mapping is updated to point to the sequential zone
|
|
and the buffer zone freed for reuse.
|
|
|
|
Metadata Protection
|
|
===================
|
|
|
|
To protect metadata against corruption in case of sudden power loss or
|
|
system crash, 2 sets of metadata zones are used. One set, the primary
|
|
set, is used as the main metadata region, while the secondary set is
|
|
used as a staging area. Modified metadata is first written to the
|
|
secondary set and validated by updating the super block in the secondary
|
|
set, a generation counter is used to indicate that this set contains the
|
|
newest metadata. Once this operation completes, in place of metadata
|
|
block updates can be done in the primary metadata set. This ensures that
|
|
one of the set is always consistent (all modifications committed or none
|
|
at all). Flush operations are used as a commit point. Upon reception of
|
|
a flush request, metadata modification activity is temporarily blocked
|
|
(for both incoming BIO processing and reclaim process) and all dirty
|
|
metadata blocks are staged and updated. Normal operation is then
|
|
resumed. Flushing metadata thus only temporarily delays write and
|
|
discard requests. Read requests can be processed concurrently while
|
|
metadata flush is being executed.
|
|
|
|
Usage
|
|
=====
|
|
|
|
A zoned block device must first be formatted using the dmzadm tool. This
|
|
will analyze the device zone configuration, determine where to place the
|
|
metadata sets on the device and initialize the metadata sets.
|
|
|
|
Ex:
|
|
|
|
dmzadm --format /dev/sdxx
|
|
|
|
For a formatted device, the target can be created normally with the
|
|
dmsetup utility. The only parameter that dm-zoned requires is the
|
|
underlying zoned block device name. Ex:
|
|
|
|
echo "0 `blockdev --getsize ${dev}` zoned ${dev}" | dmsetup create dmz-`basename ${dev}`
|