Al Cooper b0c0b66c0b phy: usb: Add support for wake and USB low power mode for 7211 S2/S5 ... Add support for 7211 USB wake. Disable all possible 7211 USB logic for S2/S5 if USB wake is not enabled. On the 7211, the XHCI wake signal was not connected properly and only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register. The workaround is to have VPU code running that polls for the proper bit in the DIAG register and to wake the system when the bit is asserted. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2020-01-08 12:58:06 +05:30
..
allwinner	phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC	2019-10-31 16:54:00 +05:30
amlogic	phy: meson-g12a-usb3-pcie: Add support for PCIe mode	2019-10-15 14:57:32 +01:00
broadcom	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30
cadence	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
freescale	phy: for 5.3	2019-07-01 15:04:59 +02:00
hisilicon	phy: hisilicon: Fix Kconfig indentation	2019-12-20 17:00:45 +05:30
lantiq	phy: lantiq: vrx200-pcie: Remove unneeded semicolon	2020-01-08 12:58:06 +05:30
marvell	ARM: SoC-related driver updates	2019-12-05 11:43:31 -08:00
mediatek	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
motorola	power: supply: cpcap-charger: Enable vbus boost voltage	2019-09-02 23:08:07 +02:00
mscc	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
qualcomm	phy: qcom-qmp: Add SW reset register	2020-01-08 12:58:06 +05:30
ralink	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157	2019-05-30 11:26:37 -07:00
renesas	phy: renesas: phy-rcar-gen2: Fix the array off by one warning	2019-10-31 16:54:01 +05:30
rockchip	phy/rockchip: inno-dsidphy: generalize parameter handling	2020-01-08 12:58:06 +05:30
samsung	phy: samsung: disable bind/unbind platform driver feature	2019-08-23 09:40:59 +05:30
socionext	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
st	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
tegra	phy: tegra: use regulator_bulk_set_supply_names()	2019-10-25 17:58:13 +05:30
ti	phy: ti-pipe3: make clk operations symmetric in probe and remove	2019-12-20 17:00:45 +05:30
Kconfig	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
Makefile	phy: enable compile-testing for the Lantiq PHY drivers	2019-08-23 09:40:51 +05:30
phy-core-mipi-dphy.c	phy: dphy: Change units of wakeup and init parameters	2019-02-07 11:11:05 +05:30
phy-core.c	phy: core: Add consumer device link support	2020-01-08 12:48:47 +05:30
phy-lpc18xx-usb-otg.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
phy-pistachio-usb.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422	2019-06-05 17:37:15 +02:00
phy-xgene.c	phy: xgene: make array serdes_reg static const, makes object smaller	2019-10-23 13:20:26 +05:30