2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 06:04:14 +08:00
linux-next/arch/powerpc/platforms/pasemi/iommu.c
Alexey Kardashevskiy 201ed7f327 powerpc/powernv/ioda2: Create bigger default window with 64k IOMMU pages
At the moment we create a small window only for 32bit devices, the window
maps 0..2GB of the PCI space only. For other devices we either use
a sketchy bypass or hardware bypass but the former can only work if
the amount of RAM is no bigger than the device's DMA mask and the latter
requires devices to support at least 59bit DMA.

This extends the default DMA window to the maximum size possible to allow
a wider DMA mask than just 32bit. The default window size is now limited
by the the iommu_table::it_map allocation bitmap which is a contiguous
array, 1 bit per an IOMMU page.

This increases the default IOMMU page size from hard coded 4K to
the system page size to allow wider DMA masks.

This increases the level number to not exceed the max order allocation
limit per TCE level. By the same time, this keeps minimal levels number
as 2 in order to save memory.

As the extended window now overlaps the 32bit MMIO region, this adds
an area reservation to iommu_init_table().

After this change the default window size is 0x80000000000==1<<43 so
devices limited to DMA mask smaller than the amount of system RAM can
still use more than just 2GB of memory for DMA.

This is an optimization and not a bug fix for DMA API usage.

With the on-demand allocation of indirect TCE table levels enabled and
2 levels, the first TCE level size is just
1<<ceil((log2(0x7ffffffffff+1)-16)/2)=16384 TCEs or 2 system pages.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-5-aik@ozlabs.ru
2019-08-19 13:20:23 +10:00

265 lines
6.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2005-2008, PA Semi, Inc
*
* Maintained by: Olof Johansson <olof@lixom.net>
*/
#undef DEBUG
#include <linux/memblock.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
#include "pasemi.h"
#define IOBMAP_PAGE_SHIFT 12
#define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT)
#define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1)
#define IOB_BASE 0xe0000000
#define IOB_SIZE 0x3000
/* Configuration registers */
#define IOBCAP_REG 0x40
#define IOBCOM_REG 0x100
/* Enable IOB address translation */
#define IOBCOM_ATEN 0x00000100
/* Address decode configuration register */
#define IOB_AD_REG 0x14c
/* IOBCOM_AD_REG fields */
#define IOB_AD_VGPRT 0x00000e00
#define IOB_AD_VGAEN 0x00000100
/* Direct mapping settings */
#define IOB_AD_MPSEL_MASK 0x00000030
#define IOB_AD_MPSEL_B38 0x00000000
#define IOB_AD_MPSEL_B40 0x00000010
#define IOB_AD_MPSEL_B42 0x00000020
/* Translation window size / enable */
#define IOB_AD_TRNG_MASK 0x00000003
#define IOB_AD_TRNG_256M 0x00000000
#define IOB_AD_TRNG_2G 0x00000001
#define IOB_AD_TRNG_128G 0x00000003
#define IOB_TABLEBASE_REG 0x154
/* Base of the 64 4-byte L1 registers */
#define IOB_XLT_L1_REGBASE 0x2b00
/* Register to invalidate TLB entries */
#define IOB_AT_INVAL_TLB_REG 0x2d00
/* The top two bits of the level 1 entry contains valid and type flags */
#define IOBMAP_L1E_V 0x40000000
#define IOBMAP_L1E_V_B 0x80000000
/* For big page entries, the bottom two bits contains flags */
#define IOBMAP_L1E_BIG_CACHED 0x00000002
#define IOBMAP_L1E_BIG_PRIORITY 0x00000001
/* For regular level 2 entries, top 2 bits contain valid and cache flags */
#define IOBMAP_L2E_V 0x80000000
#define IOBMAP_L2E_V_CACHED 0xc0000000
static void __iomem *iob;
static u32 iob_l1_emptyval;
static u32 iob_l2_emptyval;
static u32 *iob_l2_base;
static struct iommu_table iommu_table_iobmap;
static int iommu_table_iobmap_inited;
static int iobmap_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
unsigned long attrs)
{
u32 *ip;
u32 rpn;
unsigned long bus_addr;
pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr);
bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
ip = ((u32 *)tbl->it_base) + index;
while (npages--) {
rpn = __pa(uaddr) >> IOBMAP_PAGE_SHIFT;
*(ip++) = IOBMAP_L2E_V | rpn;
/* invalidate tlb, can be optimized more */
out_le32(iob+IOB_AT_INVAL_TLB_REG, bus_addr >> 14);
uaddr += IOBMAP_PAGE_SIZE;
bus_addr += IOBMAP_PAGE_SIZE;
}
return 0;
}
static void iobmap_free(struct iommu_table *tbl, long index,
long npages)
{
u32 *ip;
unsigned long bus_addr;
pr_debug("iobmap: free at: %lx, %lx\n", index, npages);
bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
ip = ((u32 *)tbl->it_base) + index;
while (npages--) {
*(ip++) = iob_l2_emptyval;
/* invalidate tlb, can be optimized more */
out_le32(iob+IOB_AT_INVAL_TLB_REG, bus_addr >> 14);
bus_addr += IOBMAP_PAGE_SIZE;
}
}
static struct iommu_table_ops iommu_table_iobmap_ops = {
.set = iobmap_build,
.clear = iobmap_free
};
static void iommu_table_iobmap_setup(void)
{
pr_debug(" -> %s\n", __func__);
iommu_table_iobmap.it_busno = 0;
iommu_table_iobmap.it_offset = 0;
iommu_table_iobmap.it_page_shift = IOBMAP_PAGE_SHIFT;
/* it_size is in number of entries */
iommu_table_iobmap.it_size =
0x80000000 >> iommu_table_iobmap.it_page_shift;
/* Initialize the common IOMMU code */
iommu_table_iobmap.it_base = (unsigned long)iob_l2_base;
iommu_table_iobmap.it_index = 0;
/* XXXOJN tune this to avoid IOB cache invals.
* Should probably be 8 (64 bytes)
*/
iommu_table_iobmap.it_blocksize = 4;
iommu_table_iobmap.it_ops = &iommu_table_iobmap_ops;
iommu_init_table(&iommu_table_iobmap, 0, 0, 0);
pr_debug(" <- %s\n", __func__);
}
static void pci_dma_bus_setup_pasemi(struct pci_bus *bus)
{
pr_debug("pci_dma_bus_setup, bus %p, bus->self %p\n", bus, bus->self);
if (!iommu_table_iobmap_inited) {
iommu_table_iobmap_inited = 1;
iommu_table_iobmap_setup();
}
}
static void pci_dma_dev_setup_pasemi(struct pci_dev *dev)
{
pr_debug("pci_dma_dev_setup, dev %p (%s)\n", dev, pci_name(dev));
#if !defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
/* For non-LPAR environment, don't translate anything for the DMA
* engine. The exception to this is if the user has enabled
* CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE at build time.
*/
if (dev->vendor == 0x1959 && dev->device == 0xa007 &&
!firmware_has_feature(FW_FEATURE_LPAR)) {
dev->dev.dma_ops = NULL;
/*
* Set the coherent DMA mask to prevent the iommu
* being used unnecessarily
*/
dev->dev.coherent_dma_mask = DMA_BIT_MASK(44);
return;
}
#endif
set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
}
static int __init iob_init(struct device_node *dn)
{
unsigned long tmp;
u32 regword;
int i;
pr_debug(" -> %s\n", __func__);
/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
iob_l2_base = memblock_alloc_try_nid_raw(1UL << 21, 1UL << 21,
MEMBLOCK_LOW_LIMIT, 0x80000000,
NUMA_NO_NODE);
if (!iob_l2_base)
panic("%s: Failed to allocate %lu bytes align=0x%lx max_addr=%x\n",
__func__, 1UL << 21, 1UL << 21, 0x80000000);
pr_info("IOBMAP L2 allocated at: %p\n", iob_l2_base);
/* Allocate a spare page to map all invalid IOTLB pages. */
tmp = memblock_phys_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
if (!tmp)
panic("IOBMAP: Cannot allocate spare page!");
/* Empty l1 is marked invalid */
iob_l1_emptyval = 0;
/* Empty l2 is mapped to dummy page */
iob_l2_emptyval = IOBMAP_L2E_V | (tmp >> IOBMAP_PAGE_SHIFT);
iob = ioremap(IOB_BASE, IOB_SIZE);
if (!iob)
panic("IOBMAP: Cannot map registers!");
/* setup direct mapping of the L1 entries */
for (i = 0; i < 64; i++) {
/* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */
regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12);
out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword);
}
/* set 2GB translation window, based at 0 */
regword = in_le32(iob+IOB_AD_REG);
regword &= ~IOB_AD_TRNG_MASK;
regword |= IOB_AD_TRNG_2G;
out_le32(iob+IOB_AD_REG, regword);
/* Enable translation */
regword = in_le32(iob+IOBCOM_REG);
regword |= IOBCOM_ATEN;
out_le32(iob+IOBCOM_REG, regword);
pr_debug(" <- %s\n", __func__);
return 0;
}
/* These are called very early. */
void __init iommu_init_early_pasemi(void)
{
int iommu_off;
#ifndef CONFIG_PPC_PASEMI_IOMMU
iommu_off = 1;
#else
iommu_off = of_chosen &&
of_get_property(of_chosen, "linux,iommu-off", NULL);
#endif
if (iommu_off)
return;
iob_init(NULL);
pasemi_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pasemi;
pasemi_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pasemi;
set_pci_dma_ops(&dma_iommu_ops);
}