mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
18c79d76ec
Set the mnd counter based on uartclk. This fixes a problem on 7x30 where the uartclk is 19.2Mhz rather than the usual 4.8Mhz. Trout incorrectly reports uartclk to be running at 19.2Mhz It is actually running at 4.8Mhz. For trout force mnd counter values as if uartclk was fed by tcxo/4. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> [dwalker@codeaurora.org: inlined, moved into header, added comments.] Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
174 lines
4.9 KiB
C
174 lines
4.9 KiB
C
/*
|
|
* drivers/serial/msm_serial.h
|
|
*
|
|
* Copyright (C) 2007 Google, Inc.
|
|
* Author: Robert Love <rlove@google.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H
|
|
#define __DRIVERS_SERIAL_MSM_SERIAL_H
|
|
|
|
#define UART_MR1 0x0000
|
|
|
|
#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
|
|
#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
|
|
#define UART_MR1_RX_RDY_CTL (1 << 7)
|
|
#define UART_MR1_CTS_CTL (1 << 6)
|
|
|
|
#define UART_MR2 0x0004
|
|
#define UART_MR2_ERROR_MODE (1 << 6)
|
|
#define UART_MR2_BITS_PER_CHAR 0x30
|
|
#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
|
|
#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
|
|
#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
|
|
#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
|
|
#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
|
|
#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
|
|
#define UART_MR2_PARITY_MODE_NONE 0x0
|
|
#define UART_MR2_PARITY_MODE_ODD 0x1
|
|
#define UART_MR2_PARITY_MODE_EVEN 0x2
|
|
#define UART_MR2_PARITY_MODE_SPACE 0x3
|
|
#define UART_MR2_PARITY_MODE 0x3
|
|
|
|
#define UART_CSR 0x0008
|
|
#define UART_CSR_115200 0xFF
|
|
#define UART_CSR_57600 0xEE
|
|
#define UART_CSR_38400 0xDD
|
|
#define UART_CSR_28800 0xCC
|
|
#define UART_CSR_19200 0xBB
|
|
#define UART_CSR_14400 0xAA
|
|
#define UART_CSR_9600 0x99
|
|
#define UART_CSR_4800 0x77
|
|
#define UART_CSR_2400 0x55
|
|
#define UART_CSR_1200 0x44
|
|
#define UART_CSR_600 0x33
|
|
#define UART_CSR_300 0x22
|
|
|
|
#define UART_TF 0x000C
|
|
|
|
#define UART_CR 0x0010
|
|
#define UART_CR_CMD_NULL (0 << 4)
|
|
#define UART_CR_CMD_RESET_RX (1 << 4)
|
|
#define UART_CR_CMD_RESET_TX (2 << 4)
|
|
#define UART_CR_CMD_RESET_ERR (3 << 4)
|
|
#define UART_CR_CMD_RESET_BREAK_INT (4 << 4)
|
|
#define UART_CR_CMD_START_BREAK (5 << 4)
|
|
#define UART_CR_CMD_STOP_BREAK (6 << 4)
|
|
#define UART_CR_CMD_RESET_CTS (7 << 4)
|
|
#define UART_CR_CMD_PACKET_MODE (9 << 4)
|
|
#define UART_CR_CMD_MODE_RESET (12 << 4)
|
|
#define UART_CR_CMD_SET_RFR (13 << 4)
|
|
#define UART_CR_CMD_RESET_RFR (14 << 4)
|
|
#define UART_CR_TX_DISABLE (1 << 3)
|
|
#define UART_CR_TX_ENABLE (1 << 3)
|
|
#define UART_CR_RX_DISABLE (1 << 3)
|
|
#define UART_CR_RX_ENABLE (1 << 3)
|
|
|
|
#define UART_IMR 0x0014
|
|
#define UART_IMR_TXLEV (1 << 0)
|
|
#define UART_IMR_RXSTALE (1 << 3)
|
|
#define UART_IMR_RXLEV (1 << 4)
|
|
#define UART_IMR_DELTA_CTS (1 << 5)
|
|
#define UART_IMR_CURRENT_CTS (1 << 6)
|
|
|
|
#define UART_IPR_RXSTALE_LAST 0x20
|
|
#define UART_IPR_STALE_LSB 0x1F
|
|
#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
|
|
|
|
#define UART_IPR 0x0018
|
|
#define UART_TFWR 0x001C
|
|
#define UART_RFWR 0x0020
|
|
#define UART_HCR 0x0024
|
|
|
|
#define UART_MREG 0x0028
|
|
#define UART_NREG 0x002C
|
|
#define UART_DREG 0x0030
|
|
#define UART_MNDREG 0x0034
|
|
#define UART_IRDA 0x0038
|
|
#define UART_MISR_MODE 0x0040
|
|
#define UART_MISR_RESET 0x0044
|
|
#define UART_MISR_EXPORT 0x0048
|
|
#define UART_MISR_VAL 0x004C
|
|
#define UART_TEST_CTRL 0x0050
|
|
|
|
#define UART_SR 0x0008
|
|
#define UART_SR_HUNT_CHAR (1 << 7)
|
|
#define UART_SR_RX_BREAK (1 << 6)
|
|
#define UART_SR_PAR_FRAME_ERR (1 << 5)
|
|
#define UART_SR_OVERRUN (1 << 4)
|
|
#define UART_SR_TX_EMPTY (1 << 3)
|
|
#define UART_SR_TX_READY (1 << 2)
|
|
#define UART_SR_RX_FULL (1 << 1)
|
|
#define UART_SR_RX_READY (1 << 0)
|
|
|
|
#define UART_RF 0x000C
|
|
#define UART_MISR 0x0010
|
|
#define UART_ISR 0x0014
|
|
|
|
#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port)
|
|
|
|
static inline
|
|
void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
|
|
{
|
|
__raw_writel(val, port->membase + off);
|
|
}
|
|
|
|
static inline
|
|
unsigned int msm_read(struct uart_port *port, unsigned int off)
|
|
{
|
|
return __raw_readl(port->membase + off);
|
|
}
|
|
|
|
/*
|
|
* Setup the MND registers to use the TCXO clock.
|
|
*/
|
|
static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
|
|
{
|
|
msm_write(port, 0x06, UART_MREG);
|
|
msm_write(port, 0xF1, UART_NREG);
|
|
msm_write(port, 0x0F, UART_DREG);
|
|
msm_write(port, 0x1A, UART_MNDREG);
|
|
}
|
|
|
|
/*
|
|
* Setup the MND registers to use the TCXO clock divided by 4.
|
|
*/
|
|
static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
|
|
{
|
|
msm_write(port, 0x18, UART_MREG);
|
|
msm_write(port, 0xF6, UART_NREG);
|
|
msm_write(port, 0x0F, UART_DREG);
|
|
msm_write(port, 0x0A, UART_MNDREG);
|
|
}
|
|
|
|
static inline
|
|
void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port)
|
|
{
|
|
if (port->uartclk == 19200000)
|
|
msm_serial_set_mnd_regs_tcxo(port);
|
|
else
|
|
msm_serial_set_mnd_regs_tcxoby4(port);
|
|
}
|
|
|
|
/*
|
|
* TROUT has a specific defect that makes it report it's uartclk
|
|
* as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special
|
|
* cases TROUT to use the right clock.
|
|
*/
|
|
#ifdef CONFIG_MACH_TROUT
|
|
#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4
|
|
#else
|
|
#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk
|
|
#endif
|
|
|
|
#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */
|