Jacob Keller aeb8264847 ixgbe: add missing supported filters to get_ts_info ... This patch updates the filters for ethtool's get_ts_info to return support for all filters which can be supported by upscaling to ptp_v2_event. The intent behind this change is due to reasoning that we do in fact support the filters. (hwtstamp_ioctl returns success after setting the filter to the upscaled version). In this way we can remain consistent over which filters are supported via the get_ts_info ioctl and which filters are in practice actually supported. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2013-01-23 14:32:57 -08:00
..
ixgbe_82598.c	ixgbe: Update link flow control to correctly handle multiple packet buffer DCB	2012-05-04 03:25:24 -07:00
ixgbe_82599.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_common.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_common.h	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_dcb_82598.c	ixgbe: Clean up priority based flow control	2012-05-09 22:15:40 -07:00
ixgbe_dcb_82598.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_dcb_82599.c	ixgbe: Clean up priority based flow control	2012-05-09 22:15:40 -07:00
ixgbe_dcb_82599.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_dcb_nl.c	ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes	2013-01-19 03:35:15 -08:00
ixgbe_dcb.c	ixgbe: Use num_tcs.pg_tcs as upper limit for TC when checking based on UP	2012-07-21 16:05:28 -07:00
ixgbe_dcb.h	ixgbe: Populate the prio_tc_map in ixgbe_setup_tc	2012-07-14 14:29:19 -07:00
ixgbe_debugfs.c	ixgbe: eliminate Smatch warnings in ixgbe_debugfs.c	2012-12-01 02:29:19 -08:00
ixgbe_ethtool.c	ixgbe: add missing supported filters to get_ts_info	2013-01-23 14:32:57 -08:00
ixgbe_fcoe.c	ixgbe: Update ixgbe Tx flags to improve code efficiency	2013-01-19 04:13:45 -08:00
ixgbe_fcoe.h	ixgbe: Make FCoE allocation and configuration closer to how rings work	2012-07-19 18:18:49 -07:00
ixgbe_lib.c	ixgbe: fix default setting of TXDCTL.WTHRESH	2012-11-01 02:00:10 -07:00
ixgbe_main.c	ixgbe: Improve performance and reduce size of ixgbe_tx_map	2013-01-19 04:21:05 -08:00
ixgbe_mbx.c	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_mbx.h	ixgbe: Add support for GET_QUEUES message to get DCB configuration	2012-10-22 21:14:54 -07:00
ixgbe_phy.c	ixgbe: add support for 1G SX modules	2012-06-20 01:37:04 -07:00
ixgbe_phy.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_ptp.c	ixgbe: remove needless queuing for L4 ptp packets	2012-11-22 01:39:37 -08:00
ixgbe_sriov.c	ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes	2013-01-19 03:35:15 -08:00
ixgbe_sriov.h	ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes	2013-01-19 03:35:15 -08:00
ixgbe_sysfs.c	drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functions	2012-07-10 23:13:46 -07:00
ixgbe_type.h	ixgbe: check whether thermal sensor is enabled.	2012-12-06 21:38:38 -08:00
ixgbe_x540.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe.h	ixgbe: Update ixgbe Tx flags to improve code efficiency	2013-01-19 04:13:45 -08:00
Makefile	ptp: Enable clock drivers along with associated net/PHY drivers	2012-11-01 11:35:18 -04:00