2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
linux-next/include/uapi/linux/fcntl.h
Jens Axboe c75b1d9421 fs: add fcntl() interface for setting/getting write life time hints
Define a set of write life time hints:

RWH_WRITE_LIFE_NOT_SET	No hint information set
RWH_WRITE_LIFE_NONE	No hints about write life time
RWH_WRITE_LIFE_SHORT	Data written has a short life time
RWH_WRITE_LIFE_MEDIUM	Data written has a medium life time
RWH_WRITE_LIFE_LONG	Data written has a long life time
RWH_WRITE_LIFE_EXTREME	Data written has an extremely long life time

The intent is for these values to be relative to each other, no
absolute meaning should be attached to these flag names.

Add an fcntl interface for querying these flags, and also for
setting them as well:

F_GET_RW_HINT		Returns the read/write hint set on the
			underlying inode.

F_SET_RW_HINT		Set one of the above write hints on the
			underlying inode.

F_GET_FILE_RW_HINT	Returns the read/write hint set on the
			file descriptor.

F_SET_FILE_RW_HINT	Set one of the above write hints on the
			file descriptor.

The user passes in a 64-bit pointer to get/set these values, and
the interface returns 0/-1 on success/error.

Sample program testing/implementing basic setting/getting of write
hints is below.

Add support for storing the write life time hint in the inode flags
and in struct file as well, and pass them to the kiocb flags. If
both a file and its corresponding inode has a write hint, then we
use the one in the file, if available. The file hint can be used
for sync/direct IO, for buffered writeback only the inode hint
is available.

This is in preparation for utilizing these hints in the block layer,
to guide on-media data placement.

/*
 * writehint.c: get or set an inode write hint
 */
 #include <stdio.h>
 #include <fcntl.h>
 #include <stdlib.h>
 #include <unistd.h>
 #include <stdbool.h>
 #include <inttypes.h>

 #ifndef F_GET_RW_HINT
 #define F_LINUX_SPECIFIC_BASE	1024
 #define F_GET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 11)
 #define F_SET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 12)
 #endif

static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE",
			"RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM",
			"RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" };

int main(int argc, char *argv[])
{
	uint64_t hint;
	int fd, ret;

	if (argc < 2) {
		fprintf(stderr, "%s: file <hint>\n", argv[0]);
		return 1;
	}

	fd = open(argv[1], O_RDONLY);
	if (fd < 0) {
		perror("open");
		return 2;
	}

	if (argc > 2) {
		hint = atoi(argv[2]);
		ret = fcntl(fd, F_SET_RW_HINT, &hint);
		if (ret < 0) {
			perror("fcntl: F_SET_RW_HINT");
			return 4;
		}
	}

	ret = fcntl(fd, F_GET_RW_HINT, &hint);
	if (ret < 0) {
		perror("fcntl: F_GET_RW_HINT");
		return 3;
	}

	printf("%s: hint %s\n", argv[1], str[hint]);
	close(fd);
	return 0;
}

Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27 12:05:22 -06:00

94 lines
3.2 KiB
C

#ifndef _UAPI_LINUX_FCNTL_H
#define _UAPI_LINUX_FCNTL_H
#include <asm/fcntl.h>
#define F_SETLEASE (F_LINUX_SPECIFIC_BASE + 0)
#define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1)
/*
* Cancel a blocking posix lock; internal use only until we expose an
* asynchronous lock api to userspace:
*/
#define F_CANCELLK (F_LINUX_SPECIFIC_BASE + 5)
/* Create a file descriptor with FD_CLOEXEC set. */
#define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6)
/*
* Request nofications on a directory.
* See below for events that may be notified.
*/
#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2)
/*
* Set and get of pipe page size array
*/
#define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7)
#define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8)
/*
* Set/Get seals
*/
#define F_ADD_SEALS (F_LINUX_SPECIFIC_BASE + 9)
#define F_GET_SEALS (F_LINUX_SPECIFIC_BASE + 10)
/*
* Types of seals
*/
#define F_SEAL_SEAL 0x0001 /* prevent further seals from being set */
#define F_SEAL_SHRINK 0x0002 /* prevent file from shrinking */
#define F_SEAL_GROW 0x0004 /* prevent file from growing */
#define F_SEAL_WRITE 0x0008 /* prevent writes */
/* (1U << 31) is reserved for signed error codes */
/*
* Set/Get write life time hints. {GET,SET}_RW_HINT operate on the
* underlying inode, while {GET,SET}_FILE_RW_HINT operate only on
* the specific file.
*/
#define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11)
#define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12)
#define F_GET_FILE_RW_HINT (F_LINUX_SPECIFIC_BASE + 13)
#define F_SET_FILE_RW_HINT (F_LINUX_SPECIFIC_BASE + 14)
/*
* Valid hint values for F_{GET,SET}_RW_HINT. 0 is "not set", or can be
* used to clear any hints previously set.
*/
#define RWF_WRITE_LIFE_NOT_SET 0
#define RWH_WRITE_LIFE_NONE 1
#define RWH_WRITE_LIFE_SHORT 2
#define RWH_WRITE_LIFE_MEDIUM 3
#define RWH_WRITE_LIFE_LONG 4
#define RWH_WRITE_LIFE_EXTREME 5
/*
* Types of directory notifications that may be requested.
*/
#define DN_ACCESS 0x00000001 /* File accessed */
#define DN_MODIFY 0x00000002 /* File modified */
#define DN_CREATE 0x00000004 /* File created */
#define DN_DELETE 0x00000008 /* File removed */
#define DN_RENAME 0x00000010 /* File renamed */
#define DN_ATTRIB 0x00000020 /* File changed attibutes */
#define DN_MULTISHOT 0x80000000 /* Don't remove notifier */
#define AT_FDCWD -100 /* Special value used to indicate
openat should use the current
working directory. */
#define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */
#define AT_REMOVEDIR 0x200 /* Remove directory instead of
unlinking file. */
#define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */
#define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */
#define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */
#define AT_STATX_SYNC_TYPE 0x6000 /* Type of synchronisation required from statx() */
#define AT_STATX_SYNC_AS_STAT 0x0000 /* - Do whatever stat() does */
#define AT_STATX_FORCE_SYNC 0x2000 /* - Force the attributes to be sync'd with the server */
#define AT_STATX_DONT_SYNC 0x4000 /* - Don't sync attributes with the server */
#endif /* _UAPI_LINUX_FCNTL_H */