2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
linux-next/drivers/mfd/intel-m10-bmc.c
Linus Torvalds 71a5cc28e8 - Core Frameworks
- Add support for Software Nodes to MFD Core
    - Remove support for Device Properties from MFD Core
    - Use standard APIs in MFD Core
 
  - New Drivers
    - Add support for ROHM BD9576MUF and BD9573MUF PMICs
    - Add support for Netronix Embedded Controller, PWM and RTC
    - Add support for Actions Semi ATC260x PMICs and OnKey
 
  - New Device Support
    - Add support for DG1 PCIe Graphics Card to Intel PMT
    - Add support for ROHM BD71815 PMIC to ROHM BD71828
    - Add support for Tolino Shine 2 HD to Netronix Embedded Controller
    - Add support for AX10 BMC Secure Updates to Intel M10 BMC
 
  - Removed Device Support
    - Remove Arizona Extcon support from MFD
    - Remove ST-E AB8500 Power Supply code from MFD
    - Remove AB3100 altogether
 
  - New Functionality
    - Add support for SMBus and I2C modes to Dialog DA9063
    - Switch to using Software Nodes in Intel (various)
 
  - New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic,
                                        netronix,ntxec, actions,atc260x,
 				       ricoh,rn5t618, qcom-pm8xxx
 
 - Fix-ups
    - Fix error handling/path; intel_pmt
    - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
    - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997
    - Use correct data-type; db8500-prcmu
    - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
    - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
    - Regmap related fix-ups; intel-m10-bmc, sec-core
    - Reorder resource freeing during remove; intel_quark_i2c_gpio
    - Make table indexing more robust; intel_quark_i2c_gpio
    - Fix reference imbalances; arizona-irq
    - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
                                         intel-lpss-acpi, intel-lpss-pci,
                                         atc260x-i2c, intel_quark_i2c_gpio
 
  - Bug Fixes
    - Fix incorrect (register) values; intel-m10-bmc
    - Kconfig related fixes; ABX500_CORE
    - Do not clear the Auto Reload Register; stm32-timers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmCJIPEACgkQUa+KL4f8
 d2FRZA//Xu9f8u2uLuIfuhxIjUUXOqIjRAFnkhKlgGZhKsY8BohjQ80Tj9yp6UKy
 St6ABwACO0hJap4zL4FxPW9+HXTmqZvAibnvHnvZdYSQ3ai6x9h6kTNvhSNLeRQU
 fuY7eN8kpAHHiHNKNJCsQLQMvcIyP7+0KAP6qir5GYsMjiXspWq7THUnfBi2JXC6
 y60guDo9XrgmQTO+pB870UJrKLM/h+iiohNRGxLFlShKhFCgbTB/wyw6bFeKy1SB
 0/6XuY6fOt1IQyBDuzw383Q2faMWO9U+es29bwvFxdqJDK0MHQXC47zBba2q94wL
 /9i/HSoz9dRHnTJNYUKWsVcPv4T84w/Iq7scyDvE00ubehJ+oo/M7Au3M6Tt3M1/
 6lBAwFYXiwhQnp9EP3nwPwgJF6JzX1IGuMOsUAqrVFOEMuIkZKbRdUlatUhqepJT
 spV4/TOfztAhY/7BzEOZLnF8cFNjmL5sn42/UzSRW708V5SxuTNsS48KJ4l0c7Er
 CZSTlR/T1rKkWqf7ejaS2TNqMCdYyB3vZW0quDxZTHTZHv9huNUvtbKPR7jmd+4p
 mrMIik7EE4BzC5m8tBPnXXZl+Og0keeYv4LUDBuLDX1agrxYIErl4ITvQTqqMfX1
 Jt14SIjSO56iu2ngQuvGWwegVK4/urO2kBJKUAH1QN1OocNaajQ=
 =IJSL
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Add support for Software Nodes to MFD Core
   - Remove support for Device Properties from MFD Core
   - Use standard APIs in MFD Core

  New Drivers:
   - Add support for ROHM BD9576MUF and BD9573MUF PMICs
   - Add support for Netronix Embedded Controller, PWM and RTC
   - Add support for Actions Semi ATC260x PMICs and OnKey

  New Device Support:
   - Add support for DG1 PCIe Graphics Card to Intel PMT
   - Add support for ROHM BD71815 PMIC to ROHM BD71828
   - Add support for Tolino Shine 2 HD to Netronix Embedded Controller
   - Add support for AX10 BMC Secure Updates to Intel M10 BMC

  Removed Device Support:
   - Remove Arizona Extcon support from MFD
   - Remove ST-E AB8500 Power Supply code from MFD
   - Remove AB3100 altogether

  New Functionality:
   - Add support for SMBus and I2C modes to Dialog DA9063
   - Switch to using Software Nodes in Intel (various)

  New/converted Device Tree bindings:
   - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
     atc260x, ricoh rn5t618, qcom pm8xxx

- Fix-ups:
   - Fix error handling/path; intel_pmt
   - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
   - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
     max8997
   - Use correct data-type; db8500-prcmu
   - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
   - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
   - Regmap related fix-ups; intel-m10-bmc, sec-core
   - Reorder resource freeing during remove; intel_quark_i2c_gpio
   - Make table indexing more robust; intel_quark_i2c_gpio
   - Fix reference imbalances; arizona-irq
   - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
     intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio

  Bug Fixes:
   - Fix incorrect (register) values; intel-m10-bmc
   - Kconfig related fixes; ABX500_CORE
   - Do not clear the Auto Reload Register; stm32-timers"

* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
  mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
  Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
  mfd: twl: Remove unused inline function twl4030charger_usb_en()
  dt-bindings: mfd: Convert pm8xxx bindings to yaml
  dt-bindings: mfd: Add compatible for pmk8350 rtc
  i2c: designware: Get rid of legacy platform data
  mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
  mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
  mfd: arizona: Fix rumtime PM imbalance on error
  mfd: max8997: Replace 8998 with 8997
  mfd: core: Use acpi_find_child_device() for child devices lookup
  mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
  mfd: intel_quark_i2c_gpio: Enable MSI interrupt
  mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
  mfd: ntxec: Support for EC in Tolino Shine 2 HD
  mfd: stm32-timers: Avoid clearing auto reload register
  mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
  mfd: intel_quark_i2c_gpio: Remove unused struct device member
  mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
  mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
  ...
2021-04-28 15:59:13 -07:00

228 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Intel MAX 10 Board Management Controller chip
*
* Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
*/
#include <linux/bitfield.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel-m10-bmc.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
enum m10bmc_type {
M10_N3000,
M10_D5005
};
static struct mfd_cell m10bmc_d5005_subdevs[] = {
{ .name = "d5005bmc-hwmon" },
};
static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
{ .name = "n3000bmc-hwmon" },
{ .name = "n3000bmc-retimer" },
{ .name = "n3000bmc-secure" },
};
static const struct regmap_range m10bmc_regmap_range[] = {
regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER),
regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END),
};
static const struct regmap_access_table m10bmc_access_table = {
.yes_ranges = m10bmc_regmap_range,
.n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range),
};
static struct regmap_config intel_m10bmc_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.wr_table = &m10bmc_access_table,
.rd_table = &m10bmc_access_table,
.max_register = M10BMC_MEM_END,
};
static ssize_t bmc_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct intel_m10bmc *ddata = dev_get_drvdata(dev);
unsigned int val;
int ret;
ret = m10bmc_sys_read(ddata, M10BMC_BUILD_VER, &val);
if (ret)
return ret;
return sprintf(buf, "0x%x\n", val);
}
static DEVICE_ATTR_RO(bmc_version);
static ssize_t bmcfw_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct intel_m10bmc *ddata = dev_get_drvdata(dev);
unsigned int val;
int ret;
ret = m10bmc_sys_read(ddata, NIOS2_FW_VERSION, &val);
if (ret)
return ret;
return sprintf(buf, "0x%x\n", val);
}
static DEVICE_ATTR_RO(bmcfw_version);
static ssize_t mac_address_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct intel_m10bmc *max10 = dev_get_drvdata(dev);
unsigned int macaddr_low, macaddr_high;
int ret;
ret = m10bmc_sys_read(max10, M10BMC_MAC_LOW, &macaddr_low);
if (ret)
return ret;
ret = m10bmc_sys_read(max10, M10BMC_MAC_HIGH, &macaddr_high);
if (ret)
return ret;
return sysfs_emit(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
(u8)FIELD_GET(M10BMC_MAC_BYTE1, macaddr_low),
(u8)FIELD_GET(M10BMC_MAC_BYTE2, macaddr_low),
(u8)FIELD_GET(M10BMC_MAC_BYTE3, macaddr_low),
(u8)FIELD_GET(M10BMC_MAC_BYTE4, macaddr_low),
(u8)FIELD_GET(M10BMC_MAC_BYTE5, macaddr_high),
(u8)FIELD_GET(M10BMC_MAC_BYTE6, macaddr_high));
}
static DEVICE_ATTR_RO(mac_address);
static ssize_t mac_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct intel_m10bmc *max10 = dev_get_drvdata(dev);
unsigned int macaddr_high;
int ret;
ret = m10bmc_sys_read(max10, M10BMC_MAC_HIGH, &macaddr_high);
if (ret)
return ret;
return sysfs_emit(buf, "%u\n",
(u8)FIELD_GET(M10BMC_MAC_COUNT, macaddr_high));
}
static DEVICE_ATTR_RO(mac_count);
static struct attribute *m10bmc_attrs[] = {
&dev_attr_bmc_version.attr,
&dev_attr_bmcfw_version.attr,
&dev_attr_mac_address.attr,
&dev_attr_mac_count.attr,
NULL,
};
ATTRIBUTE_GROUPS(m10bmc);
static int check_m10bmc_version(struct intel_m10bmc *ddata)
{
unsigned int v;
int ret;
/*
* This check is to filter out the very old legacy BMC versions. In the
* old BMC chips, the BMC version info is stored in the old version
* register (M10BMC_LEGACY_BUILD_VER), so its read out value would have
* not been M10BMC_VER_LEGACY_INVALID (0xffffffff). But in new BMC
* chips that the driver supports, the value of this register should be
* M10BMC_VER_LEGACY_INVALID.
*/
ret = m10bmc_raw_read(ddata, M10BMC_LEGACY_BUILD_VER, &v);
if (ret)
return -ENODEV;
if (v != M10BMC_VER_LEGACY_INVALID) {
dev_err(ddata->dev, "bad version M10BMC detected\n");
return -ENODEV;
}
return 0;
}
static int intel_m10_bmc_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct device *dev = &spi->dev;
struct mfd_cell *cells;
struct intel_m10bmc *ddata;
int ret, n_cell;
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
ddata->dev = dev;
ddata->regmap =
devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
if (IS_ERR(ddata->regmap)) {
ret = PTR_ERR(ddata->regmap);
dev_err(dev, "Failed to allocate regmap: %d\n", ret);
return ret;
}
spi_set_drvdata(spi, ddata);
ret = check_m10bmc_version(ddata);
if (ret) {
dev_err(dev, "Failed to identify m10bmc hardware\n");
return ret;
}
switch (id->driver_data) {
case M10_N3000:
cells = m10bmc_pacn3000_subdevs;
n_cell = ARRAY_SIZE(m10bmc_pacn3000_subdevs);
break;
case M10_D5005:
cells = m10bmc_d5005_subdevs;
n_cell = ARRAY_SIZE(m10bmc_d5005_subdevs);
break;
default:
return -ENODEV;
}
ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cells, n_cell,
NULL, 0, NULL);
if (ret)
dev_err(dev, "Failed to register sub-devices: %d\n", ret);
return ret;
}
static const struct spi_device_id m10bmc_spi_id[] = {
{ "m10-n3000", M10_N3000 },
{ "m10-d5005", M10_D5005 },
{ }
};
MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
static struct spi_driver intel_m10bmc_spi_driver = {
.driver = {
.name = "intel-m10-bmc",
.dev_groups = m10bmc_groups,
},
.probe = intel_m10_bmc_spi_probe,
.id_table = m10bmc_spi_id,
};
module_spi_driver(intel_m10bmc_spi_driver);
MODULE_DESCRIPTION("Intel MAX 10 BMC Device Driver");
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:intel-m10-bmc");