mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
d41af62763
This implements the pin configuration interface for the Nomadik pin controller. As part of the exercise we add a bit in the pin_cfg_t for the Nomadik pinctrl driver that indicates if the pin should be forced into GPIO mode. This is not done to go behind the back of the GPIO subsystem, but to ensure that default modes can be set by hogs on boot and system suspend/resume states. It was used implicitly by the old code defining all config settings and modes in a single config word but we now have a split between pinmux and pinconf leading to the need to have this. We also add a bit for explicitly setting sleepmode of the pin. This was previously handled by custom calls with the _sleep() suffix, but we now have one single interface into the configuration so we replace this with a bit indicating that the pin shall be configured into sleep mode. Some of the configuration can be refactored later to use less custom fields on the pin_cfg_t but we are currently leaving the old function calls in place so we stay compatible. ChangeLog v1->v2: - Drop a hunk changing pinmuxing for GPIO and move it over to the preceding pinmux patch. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1781 lines
44 KiB
C
1781 lines
44 KiB
C
/*
|
|
* Generic GPIO driver for logic cells found in the Nomadik SoC
|
|
*
|
|
* Copyright (C) 2008,2009 STMicroelectronics
|
|
* Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
|
|
* Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
|
|
* Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
/* Since we request GPIOs from ourself */
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <plat/pincfg.h>
|
|
#include <plat/gpio-nomadik.h>
|
|
|
|
#include "pinctrl-nomadik.h"
|
|
|
|
/*
|
|
* The GPIO module in the Nomadik family of Systems-on-Chip is an
|
|
* AMBA device, managing 32 pins and alternate functions. The logic block
|
|
* is currently used in the Nomadik and ux500.
|
|
*
|
|
* Symbols in this file are called "nmk_gpio" for "nomadik gpio"
|
|
*/
|
|
|
|
#define NMK_GPIO_PER_CHIP 32
|
|
|
|
struct nmk_gpio_chip {
|
|
struct gpio_chip chip;
|
|
struct irq_domain *domain;
|
|
void __iomem *addr;
|
|
struct clk *clk;
|
|
unsigned int bank;
|
|
unsigned int parent_irq;
|
|
int secondary_parent_irq;
|
|
u32 (*get_secondary_status)(unsigned int bank);
|
|
void (*set_ioforce)(bool enable);
|
|
spinlock_t lock;
|
|
bool sleepmode;
|
|
/* Keep track of configured edges */
|
|
u32 edge_rising;
|
|
u32 edge_falling;
|
|
u32 real_wake;
|
|
u32 rwimsc;
|
|
u32 fwimsc;
|
|
u32 rimsc;
|
|
u32 fimsc;
|
|
u32 pull_up;
|
|
u32 lowemi;
|
|
};
|
|
|
|
struct nmk_pinctrl {
|
|
struct device *dev;
|
|
struct pinctrl_dev *pctl;
|
|
const struct nmk_pinctrl_soc_data *soc;
|
|
};
|
|
|
|
static struct nmk_gpio_chip *
|
|
nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)];
|
|
|
|
static DEFINE_SPINLOCK(nmk_gpio_slpm_lock);
|
|
|
|
#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips)
|
|
|
|
static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
|
|
unsigned offset, int gpio_mode)
|
|
{
|
|
u32 bit = 1 << offset;
|
|
u32 afunc, bfunc;
|
|
|
|
afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
|
|
bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
|
|
if (gpio_mode & NMK_GPIO_ALT_A)
|
|
afunc |= bit;
|
|
if (gpio_mode & NMK_GPIO_ALT_B)
|
|
bfunc |= bit;
|
|
writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
|
|
writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
|
|
}
|
|
|
|
static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
|
|
unsigned offset, enum nmk_gpio_slpm mode)
|
|
{
|
|
u32 bit = 1 << offset;
|
|
u32 slpm;
|
|
|
|
slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
|
|
if (mode == NMK_GPIO_SLPM_NOCHANGE)
|
|
slpm |= bit;
|
|
else
|
|
slpm &= ~bit;
|
|
writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
|
|
}
|
|
|
|
static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
|
|
unsigned offset, enum nmk_gpio_pull pull)
|
|
{
|
|
u32 bit = 1 << offset;
|
|
u32 pdis;
|
|
|
|
pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
|
|
if (pull == NMK_GPIO_PULL_NONE) {
|
|
pdis |= bit;
|
|
nmk_chip->pull_up &= ~bit;
|
|
} else {
|
|
pdis &= ~bit;
|
|
}
|
|
|
|
writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
|
|
|
|
if (pull == NMK_GPIO_PULL_UP) {
|
|
nmk_chip->pull_up |= bit;
|
|
writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
|
|
} else if (pull == NMK_GPIO_PULL_DOWN) {
|
|
nmk_chip->pull_up &= ~bit;
|
|
writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
|
|
}
|
|
}
|
|
|
|
static void __nmk_gpio_set_lowemi(struct nmk_gpio_chip *nmk_chip,
|
|
unsigned offset, bool lowemi)
|
|
{
|
|
u32 bit = BIT(offset);
|
|
bool enabled = nmk_chip->lowemi & bit;
|
|
|
|
if (lowemi == enabled)
|
|
return;
|
|
|
|
if (lowemi)
|
|
nmk_chip->lowemi |= bit;
|
|
else
|
|
nmk_chip->lowemi &= ~bit;
|
|
|
|
writel_relaxed(nmk_chip->lowemi,
|
|
nmk_chip->addr + NMK_GPIO_LOWEMI);
|
|
}
|
|
|
|
static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
|
|
unsigned offset)
|
|
{
|
|
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
|
|
}
|
|
|
|
static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip,
|
|
unsigned offset, int val)
|
|
{
|
|
if (val)
|
|
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS);
|
|
else
|
|
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC);
|
|
}
|
|
|
|
static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
|
|
unsigned offset, int val)
|
|
{
|
|
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
|
|
__nmk_gpio_set_output(nmk_chip, offset, val);
|
|
}
|
|
|
|
static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip,
|
|
unsigned offset, int gpio_mode,
|
|
bool glitch)
|
|
{
|
|
u32 rwimsc = nmk_chip->rwimsc;
|
|
u32 fwimsc = nmk_chip->fwimsc;
|
|
|
|
if (glitch && nmk_chip->set_ioforce) {
|
|
u32 bit = BIT(offset);
|
|
|
|
/* Prevent spurious wakeups */
|
|
writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC);
|
|
writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC);
|
|
|
|
nmk_chip->set_ioforce(true);
|
|
}
|
|
|
|
__nmk_gpio_set_mode(nmk_chip, offset, gpio_mode);
|
|
|
|
if (glitch && nmk_chip->set_ioforce) {
|
|
nmk_chip->set_ioforce(false);
|
|
|
|
writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC);
|
|
writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC);
|
|
}
|
|
}
|
|
|
|
static void
|
|
nmk_gpio_disable_lazy_irq(struct nmk_gpio_chip *nmk_chip, unsigned offset)
|
|
{
|
|
u32 falling = nmk_chip->fimsc & BIT(offset);
|
|
u32 rising = nmk_chip->rimsc & BIT(offset);
|
|
int gpio = nmk_chip->chip.base + offset;
|
|
int irq = NOMADIK_GPIO_TO_IRQ(gpio);
|
|
struct irq_data *d = irq_get_irq_data(irq);
|
|
|
|
if (!rising && !falling)
|
|
return;
|
|
|
|
if (!d || !irqd_irq_disabled(d))
|
|
return;
|
|
|
|
if (rising) {
|
|
nmk_chip->rimsc &= ~BIT(offset);
|
|
writel_relaxed(nmk_chip->rimsc,
|
|
nmk_chip->addr + NMK_GPIO_RIMSC);
|
|
}
|
|
|
|
if (falling) {
|
|
nmk_chip->fimsc &= ~BIT(offset);
|
|
writel_relaxed(nmk_chip->fimsc,
|
|
nmk_chip->addr + NMK_GPIO_FIMSC);
|
|
}
|
|
|
|
dev_dbg(nmk_chip->chip.dev, "%d: clearing interrupt mask\n", gpio);
|
|
}
|
|
|
|
static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
|
|
pin_cfg_t cfg, bool sleep, unsigned int *slpmregs)
|
|
{
|
|
static const char *afnames[] = {
|
|
[NMK_GPIO_ALT_GPIO] = "GPIO",
|
|
[NMK_GPIO_ALT_A] = "A",
|
|
[NMK_GPIO_ALT_B] = "B",
|
|
[NMK_GPIO_ALT_C] = "C"
|
|
};
|
|
static const char *pullnames[] = {
|
|
[NMK_GPIO_PULL_NONE] = "none",
|
|
[NMK_GPIO_PULL_UP] = "up",
|
|
[NMK_GPIO_PULL_DOWN] = "down",
|
|
[3] /* illegal */ = "??"
|
|
};
|
|
static const char *slpmnames[] = {
|
|
[NMK_GPIO_SLPM_INPUT] = "input/wakeup",
|
|
[NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup",
|
|
};
|
|
|
|
int pin = PIN_NUM(cfg);
|
|
int pull = PIN_PULL(cfg);
|
|
int af = PIN_ALT(cfg);
|
|
int slpm = PIN_SLPM(cfg);
|
|
int output = PIN_DIR(cfg);
|
|
int val = PIN_VAL(cfg);
|
|
bool glitch = af == NMK_GPIO_ALT_C;
|
|
|
|
dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n",
|
|
pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm],
|
|
output ? "output " : "input",
|
|
output ? (val ? "high" : "low") : "");
|
|
|
|
if (sleep) {
|
|
int slpm_pull = PIN_SLPM_PULL(cfg);
|
|
int slpm_output = PIN_SLPM_DIR(cfg);
|
|
int slpm_val = PIN_SLPM_VAL(cfg);
|
|
|
|
af = NMK_GPIO_ALT_GPIO;
|
|
|
|
/*
|
|
* The SLPM_* values are normal values + 1 to allow zero to
|
|
* mean "same as normal".
|
|
*/
|
|
if (slpm_pull)
|
|
pull = slpm_pull - 1;
|
|
if (slpm_output)
|
|
output = slpm_output - 1;
|
|
if (slpm_val)
|
|
val = slpm_val - 1;
|
|
|
|
dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
|
|
pin,
|
|
slpm_pull ? pullnames[pull] : "same",
|
|
slpm_output ? (output ? "output" : "input") : "same",
|
|
slpm_val ? (val ? "high" : "low") : "same");
|
|
}
|
|
|
|
if (output)
|
|
__nmk_gpio_make_output(nmk_chip, offset, val);
|
|
else {
|
|
__nmk_gpio_make_input(nmk_chip, offset);
|
|
__nmk_gpio_set_pull(nmk_chip, offset, pull);
|
|
}
|
|
|
|
__nmk_gpio_set_lowemi(nmk_chip, offset, PIN_LOWEMI(cfg));
|
|
|
|
/*
|
|
* If the pin is switching to altfunc, and there was an interrupt
|
|
* installed on it which has been lazy disabled, actually mask the
|
|
* interrupt to prevent spurious interrupts that would occur while the
|
|
* pin is under control of the peripheral. Only SKE does this.
|
|
*/
|
|
if (af != NMK_GPIO_ALT_GPIO)
|
|
nmk_gpio_disable_lazy_irq(nmk_chip, offset);
|
|
|
|
/*
|
|
* If we've backed up the SLPM registers (glitch workaround), modify
|
|
* the backups since they will be restored.
|
|
*/
|
|
if (slpmregs) {
|
|
if (slpm == NMK_GPIO_SLPM_NOCHANGE)
|
|
slpmregs[nmk_chip->bank] |= BIT(offset);
|
|
else
|
|
slpmregs[nmk_chip->bank] &= ~BIT(offset);
|
|
} else
|
|
__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
|
|
|
|
__nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch);
|
|
}
|
|
|
|
/*
|
|
* Safe sequence used to switch IOs between GPIO and Alternate-C mode:
|
|
* - Save SLPM registers
|
|
* - Set SLPM=0 for the IOs you want to switch and others to 1
|
|
* - Configure the GPIO registers for the IOs that are being switched
|
|
* - Set IOFORCE=1
|
|
* - Modify the AFLSA/B registers for the IOs that are being switched
|
|
* - Set IOFORCE=0
|
|
* - Restore SLPM registers
|
|
* - Any spurious wake up event during switch sequence to be ignored and
|
|
* cleared
|
|
*/
|
|
static void nmk_gpio_glitch_slpm_init(unsigned int *slpm)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_BANKS; i++) {
|
|
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
|
|
unsigned int temp = slpm[i];
|
|
|
|
if (!chip)
|
|
break;
|
|
|
|
clk_enable(chip->clk);
|
|
|
|
slpm[i] = readl(chip->addr + NMK_GPIO_SLPC);
|
|
writel(temp, chip->addr + NMK_GPIO_SLPC);
|
|
}
|
|
}
|
|
|
|
static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_BANKS; i++) {
|
|
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
|
|
|
|
if (!chip)
|
|
break;
|
|
|
|
writel(slpm[i], chip->addr + NMK_GPIO_SLPC);
|
|
|
|
clk_disable(chip->clk);
|
|
}
|
|
}
|
|
|
|
static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
|
|
{
|
|
static unsigned int slpm[NUM_BANKS];
|
|
unsigned long flags;
|
|
bool glitch = false;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) {
|
|
glitch = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
|
|
|
|
if (glitch) {
|
|
memset(slpm, 0xff, sizeof(slpm));
|
|
|
|
for (i = 0; i < num; i++) {
|
|
int pin = PIN_NUM(cfgs[i]);
|
|
int offset = pin % NMK_GPIO_PER_CHIP;
|
|
|
|
if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C)
|
|
slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset);
|
|
}
|
|
|
|
nmk_gpio_glitch_slpm_init(slpm);
|
|
}
|
|
|
|
for (i = 0; i < num; i++) {
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
int pin = PIN_NUM(cfgs[i]);
|
|
|
|
nmk_chip = nmk_gpio_chips[pin / NMK_GPIO_PER_CHIP];
|
|
if (!nmk_chip) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
spin_lock(&nmk_chip->lock);
|
|
__nmk_config_pin(nmk_chip, pin % NMK_GPIO_PER_CHIP,
|
|
cfgs[i], sleep, glitch ? slpm : NULL);
|
|
spin_unlock(&nmk_chip->lock);
|
|
clk_disable(nmk_chip->clk);
|
|
}
|
|
|
|
if (glitch)
|
|
nmk_gpio_glitch_slpm_restore(slpm);
|
|
|
|
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* nmk_config_pin - configure a pin's mux attributes
|
|
* @cfg: pin confguration
|
|
*
|
|
* Configures a pin's mode (alternate function or GPIO), its pull up status,
|
|
* and its sleep mode based on the specified configuration. The @cfg is
|
|
* usually one of the SoC specific macros defined in mach/<soc>-pins.h. These
|
|
* are constructed using, and can be further enhanced with, the macros in
|
|
* plat/pincfg.h.
|
|
*
|
|
* If a pin's mode is set to GPIO, it is configured as an input to avoid
|
|
* side-effects. The gpio can be manipulated later using standard GPIO API
|
|
* calls.
|
|
*/
|
|
int nmk_config_pin(pin_cfg_t cfg, bool sleep)
|
|
{
|
|
return __nmk_config_pins(&cfg, 1, sleep);
|
|
}
|
|
EXPORT_SYMBOL(nmk_config_pin);
|
|
|
|
/**
|
|
* nmk_config_pins - configure several pins at once
|
|
* @cfgs: array of pin configurations
|
|
* @num: number of elments in the array
|
|
*
|
|
* Configures several pins using nmk_config_pin(). Refer to that function for
|
|
* further information.
|
|
*/
|
|
int nmk_config_pins(pin_cfg_t *cfgs, int num)
|
|
{
|
|
return __nmk_config_pins(cfgs, num, false);
|
|
}
|
|
EXPORT_SYMBOL(nmk_config_pins);
|
|
|
|
int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num)
|
|
{
|
|
return __nmk_config_pins(cfgs, num, true);
|
|
}
|
|
EXPORT_SYMBOL(nmk_config_pins_sleep);
|
|
|
|
/**
|
|
* nmk_gpio_set_slpm() - configure the sleep mode of a pin
|
|
* @gpio: pin number
|
|
* @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
|
|
*
|
|
* This register is actually in the pinmux layer, not the GPIO block itself.
|
|
* The GPIO1B_SLPM register defines the GPIO mode when SLEEP/DEEP-SLEEP
|
|
* mode is entered (i.e. when signal IOFORCE is HIGH by the platform code).
|
|
* Each GPIO can be configured to be forced into GPIO mode when IOFORCE is
|
|
* HIGH, overriding the normal setting defined by GPIO_AFSELx registers.
|
|
* When IOFORCE returns LOW (by software, after SLEEP/DEEP-SLEEP exit),
|
|
* the GPIOs return to the normal setting defined by GPIO_AFSELx registers.
|
|
*
|
|
* If @mode is NMK_GPIO_SLPM_INPUT, the corresponding GPIO is switched to GPIO
|
|
* mode when signal IOFORCE is HIGH (i.e. when SLEEP/DEEP-SLEEP mode is
|
|
* entered) regardless of the altfunction selected. Also wake-up detection is
|
|
* ENABLED.
|
|
*
|
|
* If @mode is NMK_GPIO_SLPM_NOCHANGE, the corresponding GPIO remains
|
|
* controlled by NMK_GPIO_DATC, NMK_GPIO_DATS, NMK_GPIO_DIR, NMK_GPIO_PDIS
|
|
* (for altfunction GPIO) or respective on-chip peripherals (for other
|
|
* altfuncs) when IOFORCE is HIGH. Also wake-up detection DISABLED.
|
|
*
|
|
* Note that enable_irq_wake() will automatically enable wakeup detection.
|
|
*/
|
|
int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
unsigned long flags;
|
|
|
|
nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP];
|
|
if (!nmk_chip)
|
|
return -EINVAL;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
|
|
spin_lock(&nmk_chip->lock);
|
|
|
|
__nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP, mode);
|
|
|
|
spin_unlock(&nmk_chip->lock);
|
|
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
|
|
* @gpio: pin number
|
|
* @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
|
|
*
|
|
* Enables/disables pull up/down on a specified pin. This only takes effect if
|
|
* the pin is configured as an input (either explicitly or by the alternate
|
|
* function).
|
|
*
|
|
* NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
|
|
* configured as an input. Otherwise, due to the way the controller registers
|
|
* work, this function will change the value output on the pin.
|
|
*/
|
|
int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
unsigned long flags;
|
|
|
|
nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP];
|
|
if (!nmk_chip)
|
|
return -EINVAL;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
spin_lock_irqsave(&nmk_chip->lock, flags);
|
|
__nmk_gpio_set_pull(nmk_chip, gpio % NMK_GPIO_PER_CHIP, pull);
|
|
spin_unlock_irqrestore(&nmk_chip->lock, flags);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Mode functions */
|
|
/**
|
|
* nmk_gpio_set_mode() - set the mux mode of a gpio pin
|
|
* @gpio: pin number
|
|
* @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A,
|
|
* NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C
|
|
*
|
|
* Sets the mode of the specified pin to one of the alternate functions or
|
|
* plain GPIO.
|
|
*/
|
|
int nmk_gpio_set_mode(int gpio, int gpio_mode)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
unsigned long flags;
|
|
|
|
nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP];
|
|
if (!nmk_chip)
|
|
return -EINVAL;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
spin_lock_irqsave(&nmk_chip->lock, flags);
|
|
__nmk_gpio_set_mode(nmk_chip, gpio % NMK_GPIO_PER_CHIP, gpio_mode);
|
|
spin_unlock_irqrestore(&nmk_chip->lock, flags);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(nmk_gpio_set_mode);
|
|
|
|
int nmk_gpio_get_mode(int gpio)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
u32 afunc, bfunc, bit;
|
|
|
|
nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP];
|
|
if (!nmk_chip)
|
|
return -EINVAL;
|
|
|
|
bit = 1 << (gpio % NMK_GPIO_PER_CHIP);
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
|
|
afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
|
|
bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
|
|
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
|
|
}
|
|
EXPORT_SYMBOL(nmk_gpio_get_mode);
|
|
|
|
|
|
/* IRQ functions */
|
|
static inline int nmk_gpio_get_bitmask(int gpio)
|
|
{
|
|
return 1 << (gpio % NMK_GPIO_PER_CHIP);
|
|
}
|
|
|
|
static void nmk_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
|
|
nmk_chip = irq_data_get_irq_chip_data(d);
|
|
if (!nmk_chip)
|
|
return;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
writel(nmk_gpio_get_bitmask(d->hwirq), nmk_chip->addr + NMK_GPIO_IC);
|
|
clk_disable(nmk_chip->clk);
|
|
}
|
|
|
|
enum nmk_gpio_irq_type {
|
|
NORMAL,
|
|
WAKE,
|
|
};
|
|
|
|
static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
|
|
int gpio, enum nmk_gpio_irq_type which,
|
|
bool enable)
|
|
{
|
|
u32 bitmask = nmk_gpio_get_bitmask(gpio);
|
|
u32 *rimscval;
|
|
u32 *fimscval;
|
|
u32 rimscreg;
|
|
u32 fimscreg;
|
|
|
|
if (which == NORMAL) {
|
|
rimscreg = NMK_GPIO_RIMSC;
|
|
fimscreg = NMK_GPIO_FIMSC;
|
|
rimscval = &nmk_chip->rimsc;
|
|
fimscval = &nmk_chip->fimsc;
|
|
} else {
|
|
rimscreg = NMK_GPIO_RWIMSC;
|
|
fimscreg = NMK_GPIO_FWIMSC;
|
|
rimscval = &nmk_chip->rwimsc;
|
|
fimscval = &nmk_chip->fwimsc;
|
|
}
|
|
|
|
/* we must individually set/clear the two edges */
|
|
if (nmk_chip->edge_rising & bitmask) {
|
|
if (enable)
|
|
*rimscval |= bitmask;
|
|
else
|
|
*rimscval &= ~bitmask;
|
|
writel(*rimscval, nmk_chip->addr + rimscreg);
|
|
}
|
|
if (nmk_chip->edge_falling & bitmask) {
|
|
if (enable)
|
|
*fimscval |= bitmask;
|
|
else
|
|
*fimscval &= ~bitmask;
|
|
writel(*fimscval, nmk_chip->addr + fimscreg);
|
|
}
|
|
}
|
|
|
|
static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
|
|
int gpio, bool on)
|
|
{
|
|
/*
|
|
* Ensure WAKEUP_ENABLE is on. No need to disable it if wakeup is
|
|
* disabled, since setting SLPM to 1 increases power consumption, and
|
|
* wakeup is anyhow controlled by the RIMSC and FIMSC registers.
|
|
*/
|
|
if (nmk_chip->sleepmode && on) {
|
|
__nmk_gpio_set_slpm(nmk_chip, gpio % nmk_chip->chip.base,
|
|
NMK_GPIO_SLPM_WAKEUP_ENABLE);
|
|
}
|
|
|
|
__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
|
|
}
|
|
|
|
static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
unsigned long flags;
|
|
u32 bitmask;
|
|
|
|
nmk_chip = irq_data_get_irq_chip_data(d);
|
|
bitmask = nmk_gpio_get_bitmask(d->hwirq);
|
|
if (!nmk_chip)
|
|
return -EINVAL;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
|
|
spin_lock(&nmk_chip->lock);
|
|
|
|
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, enable);
|
|
|
|
if (!(nmk_chip->real_wake & bitmask))
|
|
__nmk_gpio_set_wake(nmk_chip, d->hwirq, enable);
|
|
|
|
spin_unlock(&nmk_chip->lock);
|
|
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nmk_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
nmk_gpio_irq_maskunmask(d, false);
|
|
}
|
|
|
|
static void nmk_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
nmk_gpio_irq_maskunmask(d, true);
|
|
}
|
|
|
|
static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
unsigned long flags;
|
|
u32 bitmask;
|
|
|
|
nmk_chip = irq_data_get_irq_chip_data(d);
|
|
if (!nmk_chip)
|
|
return -EINVAL;
|
|
bitmask = nmk_gpio_get_bitmask(d->hwirq);
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
|
|
spin_lock(&nmk_chip->lock);
|
|
|
|
if (irqd_irq_disabled(d))
|
|
__nmk_gpio_set_wake(nmk_chip, d->hwirq, on);
|
|
|
|
if (on)
|
|
nmk_chip->real_wake |= bitmask;
|
|
else
|
|
nmk_chip->real_wake &= ~bitmask;
|
|
|
|
spin_unlock(&nmk_chip->lock);
|
|
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
bool enabled = !irqd_irq_disabled(d);
|
|
bool wake = irqd_is_wakeup_set(d);
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
unsigned long flags;
|
|
u32 bitmask;
|
|
|
|
nmk_chip = irq_data_get_irq_chip_data(d);
|
|
bitmask = nmk_gpio_get_bitmask(d->hwirq);
|
|
if (!nmk_chip)
|
|
return -EINVAL;
|
|
if (type & IRQ_TYPE_LEVEL_HIGH)
|
|
return -EINVAL;
|
|
if (type & IRQ_TYPE_LEVEL_LOW)
|
|
return -EINVAL;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
spin_lock_irqsave(&nmk_chip->lock, flags);
|
|
|
|
if (enabled)
|
|
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, false);
|
|
|
|
if (enabled || wake)
|
|
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, WAKE, false);
|
|
|
|
nmk_chip->edge_rising &= ~bitmask;
|
|
if (type & IRQ_TYPE_EDGE_RISING)
|
|
nmk_chip->edge_rising |= bitmask;
|
|
|
|
nmk_chip->edge_falling &= ~bitmask;
|
|
if (type & IRQ_TYPE_EDGE_FALLING)
|
|
nmk_chip->edge_falling |= bitmask;
|
|
|
|
if (enabled)
|
|
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, true);
|
|
|
|
if (enabled || wake)
|
|
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, WAKE, true);
|
|
|
|
spin_unlock_irqrestore(&nmk_chip->lock, flags);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int nmk_gpio_irq_startup(struct irq_data *d)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
nmk_gpio_irq_unmask(d);
|
|
return 0;
|
|
}
|
|
|
|
static void nmk_gpio_irq_shutdown(struct irq_data *d)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
|
|
|
|
nmk_gpio_irq_mask(d);
|
|
clk_disable(nmk_chip->clk);
|
|
}
|
|
|
|
static struct irq_chip nmk_gpio_irq_chip = {
|
|
.name = "Nomadik-GPIO",
|
|
.irq_ack = nmk_gpio_irq_ack,
|
|
.irq_mask = nmk_gpio_irq_mask,
|
|
.irq_unmask = nmk_gpio_irq_unmask,
|
|
.irq_set_type = nmk_gpio_irq_set_type,
|
|
.irq_set_wake = nmk_gpio_irq_set_wake,
|
|
.irq_startup = nmk_gpio_irq_startup,
|
|
.irq_shutdown = nmk_gpio_irq_shutdown,
|
|
};
|
|
|
|
static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
|
|
u32 status)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
struct irq_chip *host_chip = irq_get_chip(irq);
|
|
unsigned int first_irq;
|
|
|
|
chained_irq_enter(host_chip, desc);
|
|
|
|
nmk_chip = irq_get_handler_data(irq);
|
|
first_irq = nmk_chip->domain->revmap_data.legacy.first_irq;
|
|
while (status) {
|
|
int bit = __ffs(status);
|
|
|
|
generic_handle_irq(first_irq + bit);
|
|
status &= ~BIT(bit);
|
|
}
|
|
|
|
chained_irq_exit(host_chip, desc);
|
|
}
|
|
|
|
static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
|
|
u32 status;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
status = readl(nmk_chip->addr + NMK_GPIO_IS);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
__nmk_gpio_irq_handler(irq, desc, status);
|
|
}
|
|
|
|
static void nmk_gpio_secondary_irq_handler(unsigned int irq,
|
|
struct irq_desc *desc)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
|
|
u32 status = nmk_chip->get_secondary_status(nmk_chip->bank);
|
|
|
|
__nmk_gpio_irq_handler(irq, desc, status);
|
|
}
|
|
|
|
static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
|
|
{
|
|
irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
|
|
irq_set_handler_data(nmk_chip->parent_irq, nmk_chip);
|
|
|
|
if (nmk_chip->secondary_parent_irq >= 0) {
|
|
irq_set_chained_handler(nmk_chip->secondary_parent_irq,
|
|
nmk_gpio_secondary_irq_handler);
|
|
irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* I/O Functions */
|
|
|
|
static int nmk_gpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
/*
|
|
* Map back to global GPIO space and request muxing, the direction
|
|
* parameter does not matter for this controller.
|
|
*/
|
|
int gpio = chip->base + offset;
|
|
|
|
return pinctrl_request_gpio(gpio);
|
|
}
|
|
|
|
static void nmk_gpio_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
int gpio = chip->base + offset;
|
|
|
|
pinctrl_free_gpio(gpio);
|
|
}
|
|
|
|
static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip =
|
|
container_of(chip, struct nmk_gpio_chip, chip);
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
|
|
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
|
|
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip =
|
|
container_of(chip, struct nmk_gpio_chip, chip);
|
|
u32 bit = 1 << offset;
|
|
int value;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
|
|
value = (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
|
|
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return value;
|
|
}
|
|
|
|
static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
|
|
int val)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip =
|
|
container_of(chip, struct nmk_gpio_chip, chip);
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
|
|
__nmk_gpio_set_output(nmk_chip, offset, val);
|
|
|
|
clk_disable(nmk_chip->clk);
|
|
}
|
|
|
|
static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
|
|
int val)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip =
|
|
container_of(chip, struct nmk_gpio_chip, chip);
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
|
|
__nmk_gpio_make_output(nmk_chip, offset, val);
|
|
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip =
|
|
container_of(chip, struct nmk_gpio_chip, chip);
|
|
|
|
return irq_find_mapping(nmk_chip->domain, offset);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
static void nmk_gpio_dbg_show_one(struct seq_file *s, struct gpio_chip *chip,
|
|
unsigned offset, unsigned gpio)
|
|
{
|
|
const char *label = gpiochip_is_requested(chip, offset);
|
|
struct nmk_gpio_chip *nmk_chip =
|
|
container_of(chip, struct nmk_gpio_chip, chip);
|
|
int mode;
|
|
bool is_out;
|
|
bool pull;
|
|
u32 bit = 1 << offset;
|
|
const char *modes[] = {
|
|
[NMK_GPIO_ALT_GPIO] = "gpio",
|
|
[NMK_GPIO_ALT_A] = "altA",
|
|
[NMK_GPIO_ALT_B] = "altB",
|
|
[NMK_GPIO_ALT_C] = "altC",
|
|
};
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
is_out = !!(readl(nmk_chip->addr + NMK_GPIO_DIR) & bit);
|
|
pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit);
|
|
mode = nmk_gpio_get_mode(gpio);
|
|
|
|
seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s",
|
|
gpio, label ?: "(none)",
|
|
is_out ? "out" : "in ",
|
|
chip->get
|
|
? (chip->get(chip, offset) ? "hi" : "lo")
|
|
: "? ",
|
|
(mode < 0) ? "unknown" : modes[mode],
|
|
pull ? "pull" : "none");
|
|
|
|
if (label && !is_out) {
|
|
int irq = gpio_to_irq(gpio);
|
|
struct irq_desc *desc = irq_to_desc(irq);
|
|
|
|
/* This races with request_irq(), set_irq_type(),
|
|
* and set_irq_wake() ... but those are "rare".
|
|
*/
|
|
if (irq >= 0 && desc->action) {
|
|
char *trigger;
|
|
u32 bitmask = nmk_gpio_get_bitmask(gpio);
|
|
|
|
if (nmk_chip->edge_rising & bitmask)
|
|
trigger = "edge-rising";
|
|
else if (nmk_chip->edge_falling & bitmask)
|
|
trigger = "edge-falling";
|
|
else
|
|
trigger = "edge-undefined";
|
|
|
|
seq_printf(s, " irq-%d %s%s",
|
|
irq, trigger,
|
|
irqd_is_wakeup_set(&desc->irq_data)
|
|
? " wakeup" : "");
|
|
}
|
|
}
|
|
clk_disable(nmk_chip->clk);
|
|
}
|
|
|
|
static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
unsigned i;
|
|
unsigned gpio = chip->base;
|
|
|
|
for (i = 0; i < chip->ngpio; i++, gpio++) {
|
|
nmk_gpio_dbg_show_one(s, chip, i, gpio);
|
|
seq_printf(s, "\n");
|
|
}
|
|
}
|
|
|
|
#else
|
|
static inline void nmk_gpio_dbg_show_one(struct seq_file *s,
|
|
struct gpio_chip *chip,
|
|
unsigned offset, unsigned gpio)
|
|
{
|
|
}
|
|
#define nmk_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
/* This structure is replicated for each GPIO block allocated at probe time */
|
|
static struct gpio_chip nmk_gpio_template = {
|
|
.request = nmk_gpio_request,
|
|
.free = nmk_gpio_free,
|
|
.direction_input = nmk_gpio_make_input,
|
|
.get = nmk_gpio_get_input,
|
|
.direction_output = nmk_gpio_make_output,
|
|
.set = nmk_gpio_set_output,
|
|
.to_irq = nmk_gpio_to_irq,
|
|
.dbg_show = nmk_gpio_dbg_show,
|
|
.can_sleep = 0,
|
|
};
|
|
|
|
void nmk_gpio_clocks_enable(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_BANKS; i++) {
|
|
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
|
|
|
|
if (!chip)
|
|
continue;
|
|
|
|
clk_enable(chip->clk);
|
|
}
|
|
}
|
|
|
|
void nmk_gpio_clocks_disable(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_BANKS; i++) {
|
|
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
|
|
|
|
if (!chip)
|
|
continue;
|
|
|
|
clk_disable(chip->clk);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Called from the suspend/resume path to only keep the real wakeup interrupts
|
|
* (those that have had set_irq_wake() called on them) as wakeup interrupts,
|
|
* and not the rest of the interrupts which we needed to have as wakeups for
|
|
* cpuidle.
|
|
*
|
|
* PM ops are not used since this needs to be done at the end, after all the
|
|
* other drivers are done with their suspend callbacks.
|
|
*/
|
|
void nmk_gpio_wakeups_suspend(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_BANKS; i++) {
|
|
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
|
|
|
|
if (!chip)
|
|
break;
|
|
|
|
clk_enable(chip->clk);
|
|
|
|
writel(chip->rwimsc & chip->real_wake,
|
|
chip->addr + NMK_GPIO_RWIMSC);
|
|
writel(chip->fwimsc & chip->real_wake,
|
|
chip->addr + NMK_GPIO_FWIMSC);
|
|
|
|
clk_disable(chip->clk);
|
|
}
|
|
}
|
|
|
|
void nmk_gpio_wakeups_resume(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_BANKS; i++) {
|
|
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
|
|
|
|
if (!chip)
|
|
break;
|
|
|
|
clk_enable(chip->clk);
|
|
|
|
writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
|
|
writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
|
|
|
|
clk_disable(chip->clk);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read the pull up/pull down status.
|
|
* A bit set in 'pull_up' means that pull up
|
|
* is selected if pull is enabled in PDIS register.
|
|
* Note: only pull up/down set via this driver can
|
|
* be detected due to HW limitations.
|
|
*/
|
|
void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up)
|
|
{
|
|
if (gpio_bank < NUM_BANKS) {
|
|
struct nmk_gpio_chip *chip = nmk_gpio_chips[gpio_bank];
|
|
|
|
if (!chip)
|
|
return;
|
|
|
|
*pull_up = chip->pull_up;
|
|
}
|
|
}
|
|
|
|
int nmk_gpio_irq_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct nmk_gpio_chip *nmk_chip = d->host_data;
|
|
|
|
if (!nmk_chip)
|
|
return -EINVAL;
|
|
|
|
irq_set_chip_and_handler(irq, &nmk_gpio_irq_chip, handle_edge_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
irq_set_chip_data(irq, nmk_chip);
|
|
irq_set_irq_type(irq, IRQ_TYPE_EDGE_FALLING);
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct irq_domain_ops nmk_gpio_irq_simple_ops = {
|
|
.map = nmk_gpio_irq_map,
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
static int __devinit nmk_gpio_probe(struct platform_device *dev)
|
|
{
|
|
struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
|
|
struct device_node *np = dev->dev.of_node;
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
struct gpio_chip *chip;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
int secondary_irq;
|
|
void __iomem *base;
|
|
int irq;
|
|
int ret;
|
|
|
|
if (!pdata && !np) {
|
|
dev_err(&dev->dev, "No platform data or device tree found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (np) {
|
|
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
if (of_get_property(np, "supports-sleepmode", NULL))
|
|
pdata->supports_sleepmode = true;
|
|
|
|
if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
|
|
dev_err(&dev->dev, "gpio-bank property not found\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
|
|
pdata->num_gpio = NMK_GPIO_PER_CHIP;
|
|
}
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
ret = -ENOENT;
|
|
goto out;
|
|
}
|
|
|
|
irq = platform_get_irq(dev, 0);
|
|
if (irq < 0) {
|
|
ret = irq;
|
|
goto out;
|
|
}
|
|
|
|
secondary_irq = platform_get_irq(dev, 1);
|
|
if (secondary_irq >= 0 && !pdata->get_secondary_status) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (request_mem_region(res->start, resource_size(res),
|
|
dev_name(&dev->dev)) == NULL) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
base = ioremap(res->start, resource_size(res));
|
|
if (!base) {
|
|
ret = -ENOMEM;
|
|
goto out_release;
|
|
}
|
|
|
|
clk = clk_get(&dev->dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
ret = PTR_ERR(clk);
|
|
goto out_unmap;
|
|
}
|
|
|
|
nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
|
|
if (!nmk_chip) {
|
|
ret = -ENOMEM;
|
|
goto out_clk;
|
|
}
|
|
|
|
/*
|
|
* The virt address in nmk_chip->addr is in the nomadik register space,
|
|
* so we can simply convert the resource address, without remapping
|
|
*/
|
|
nmk_chip->bank = dev->id;
|
|
nmk_chip->clk = clk;
|
|
nmk_chip->addr = base;
|
|
nmk_chip->chip = nmk_gpio_template;
|
|
nmk_chip->parent_irq = irq;
|
|
nmk_chip->secondary_parent_irq = secondary_irq;
|
|
nmk_chip->get_secondary_status = pdata->get_secondary_status;
|
|
nmk_chip->set_ioforce = pdata->set_ioforce;
|
|
nmk_chip->sleepmode = pdata->supports_sleepmode;
|
|
spin_lock_init(&nmk_chip->lock);
|
|
|
|
chip = &nmk_chip->chip;
|
|
chip->base = pdata->first_gpio;
|
|
chip->ngpio = pdata->num_gpio;
|
|
chip->label = pdata->name ?: dev_name(&dev->dev);
|
|
chip->dev = &dev->dev;
|
|
chip->owner = THIS_MODULE;
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
#ifdef CONFIG_OF_GPIO
|
|
chip->of_node = np;
|
|
#endif
|
|
|
|
ret = gpiochip_add(&nmk_chip->chip);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
|
|
|
|
nmk_gpio_chips[nmk_chip->bank] = nmk_chip;
|
|
|
|
platform_set_drvdata(dev, nmk_chip);
|
|
|
|
nmk_chip->domain = irq_domain_add_legacy(np, NMK_GPIO_PER_CHIP,
|
|
NOMADIK_GPIO_TO_IRQ(pdata->first_gpio),
|
|
0, &nmk_gpio_irq_simple_ops, nmk_chip);
|
|
if (!nmk_chip->domain) {
|
|
pr_err("%s: Failed to create irqdomain\n", np->full_name);
|
|
ret = -ENOSYS;
|
|
goto out_free;
|
|
}
|
|
|
|
nmk_gpio_init_irq(nmk_chip);
|
|
|
|
dev_info(&dev->dev, "at address %p\n", nmk_chip->addr);
|
|
|
|
return 0;
|
|
|
|
out_free:
|
|
kfree(nmk_chip);
|
|
out_clk:
|
|
clk_disable(clk);
|
|
clk_put(clk);
|
|
out_unmap:
|
|
iounmap(base);
|
|
out_release:
|
|
release_mem_region(res->start, resource_size(res));
|
|
out:
|
|
dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
|
|
pdata->first_gpio, pdata->first_gpio+31);
|
|
if (np)
|
|
kfree(pdata);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nmk_get_groups_cnt(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return npct->soc->ngroups;
|
|
}
|
|
|
|
static const char *nmk_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return npct->soc->groups[selector].name;
|
|
}
|
|
|
|
static int nmk_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = npct->soc->groups[selector].pins;
|
|
*num_pins = npct->soc->groups[selector].npins;
|
|
return 0;
|
|
}
|
|
|
|
static struct pinctrl_gpio_range *
|
|
nmk_match_gpio_range(struct pinctrl_dev *pctldev, unsigned offset)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
int i;
|
|
|
|
for (i = 0; i < npct->soc->gpio_num_ranges; i++) {
|
|
struct pinctrl_gpio_range *range;
|
|
|
|
range = &npct->soc->gpio_ranges[i];
|
|
if (offset >= range->pin_base &&
|
|
offset <= (range->pin_base + range->npins - 1))
|
|
return range;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void nmk_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
|
|
unsigned offset)
|
|
{
|
|
struct pinctrl_gpio_range *range;
|
|
struct gpio_chip *chip;
|
|
|
|
range = nmk_match_gpio_range(pctldev, offset);
|
|
if (!range || !range->gc) {
|
|
seq_printf(s, "invalid pin offset");
|
|
return;
|
|
}
|
|
chip = range->gc;
|
|
nmk_gpio_dbg_show_one(s, chip, offset - chip->base, offset);
|
|
}
|
|
|
|
static struct pinctrl_ops nmk_pinctrl_ops = {
|
|
.get_groups_count = nmk_get_groups_cnt,
|
|
.get_group_name = nmk_get_group_name,
|
|
.get_group_pins = nmk_get_group_pins,
|
|
.pin_dbg_show = nmk_pin_dbg_show,
|
|
};
|
|
|
|
static int nmk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return npct->soc->nfunctions;
|
|
}
|
|
|
|
static const char *nmk_pmx_get_func_name(struct pinctrl_dev *pctldev,
|
|
unsigned function)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return npct->soc->functions[function].name;
|
|
}
|
|
|
|
static int nmk_pmx_get_func_groups(struct pinctrl_dev *pctldev,
|
|
unsigned function,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = npct->soc->functions[function].groups;
|
|
*num_groups = npct->soc->functions[function].ngroups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nmk_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
|
|
unsigned group)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct nmk_pingroup *g;
|
|
static unsigned int slpm[NUM_BANKS];
|
|
unsigned long flags;
|
|
bool glitch;
|
|
int ret = -EINVAL;
|
|
int i;
|
|
|
|
g = &npct->soc->groups[group];
|
|
|
|
if (g->altsetting < 0)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
|
|
|
|
/* Handle this special glitch on altfunction C */
|
|
glitch = (g->altsetting == NMK_GPIO_ALT_C);
|
|
|
|
if (glitch) {
|
|
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
|
|
|
|
/* Initially don't put any pins to sleep when switching */
|
|
memset(slpm, 0xff, sizeof(slpm));
|
|
|
|
/*
|
|
* Then mask the pins that need to be sleeping now when we're
|
|
* switching to the ALT C function.
|
|
*/
|
|
for (i = 0; i < g->npins; i++)
|
|
slpm[g->pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(g->pins[i]);
|
|
nmk_gpio_glitch_slpm_init(slpm);
|
|
}
|
|
|
|
for (i = 0; i < g->npins; i++) {
|
|
struct pinctrl_gpio_range *range;
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
struct gpio_chip *chip;
|
|
unsigned bit;
|
|
|
|
range = nmk_match_gpio_range(pctldev, g->pins[i]);
|
|
if (!range) {
|
|
dev_err(npct->dev,
|
|
"invalid pin offset %d in group %s at index %d\n",
|
|
g->pins[i], g->name, i);
|
|
goto out_glitch;
|
|
}
|
|
if (!range->gc) {
|
|
dev_err(npct->dev, "GPIO chip missing in range for pin offset %d in group %s at index %d\n",
|
|
g->pins[i], g->name, i);
|
|
goto out_glitch;
|
|
}
|
|
chip = range->gc;
|
|
nmk_chip = container_of(chip, struct nmk_gpio_chip, chip);
|
|
dev_dbg(npct->dev, "setting pin %d to altsetting %d\n", g->pins[i], g->altsetting);
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
bit = g->pins[i] % NMK_GPIO_PER_CHIP;
|
|
/*
|
|
* If the pin is switching to altfunc, and there was an
|
|
* interrupt installed on it which has been lazy disabled,
|
|
* actually mask the interrupt to prevent spurious interrupts
|
|
* that would occur while the pin is under control of the
|
|
* peripheral. Only SKE does this.
|
|
*/
|
|
nmk_gpio_disable_lazy_irq(nmk_chip, bit);
|
|
|
|
__nmk_gpio_set_mode_safe(nmk_chip, bit, g->altsetting, glitch);
|
|
clk_disable(nmk_chip->clk);
|
|
}
|
|
|
|
/* When all pins are successfully reconfigured we get here */
|
|
ret = 0;
|
|
|
|
out_glitch:
|
|
if (glitch) {
|
|
nmk_gpio_glitch_slpm_restore(slpm);
|
|
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void nmk_pmx_disable(struct pinctrl_dev *pctldev,
|
|
unsigned function, unsigned group)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct nmk_pingroup *g;
|
|
|
|
g = &npct->soc->groups[group];
|
|
|
|
if (g->altsetting < 0)
|
|
return;
|
|
|
|
/* Poke out the mux, set the pin to some default state? */
|
|
dev_dbg(npct->dev, "disable group %s, %u pins\n", g->name, g->npins);
|
|
}
|
|
|
|
int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
struct gpio_chip *chip;
|
|
unsigned bit;
|
|
|
|
if (!range) {
|
|
dev_err(npct->dev, "invalid range\n");
|
|
return -EINVAL;
|
|
}
|
|
if (!range->gc) {
|
|
dev_err(npct->dev, "missing GPIO chip in range\n");
|
|
return -EINVAL;
|
|
}
|
|
chip = range->gc;
|
|
nmk_chip = container_of(chip, struct nmk_gpio_chip, chip);
|
|
|
|
dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
bit = offset % NMK_GPIO_PER_CHIP;
|
|
/* There is no glitch when converting any pin to GPIO */
|
|
__nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO);
|
|
clk_disable(nmk_chip->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void nmk_gpio_disable_free(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset);
|
|
/* Set the pin to some default state, GPIO is usually default */
|
|
}
|
|
|
|
static struct pinmux_ops nmk_pinmux_ops = {
|
|
.get_functions_count = nmk_pmx_get_funcs_cnt,
|
|
.get_function_name = nmk_pmx_get_func_name,
|
|
.get_function_groups = nmk_pmx_get_func_groups,
|
|
.enable = nmk_pmx_enable,
|
|
.disable = nmk_pmx_disable,
|
|
.gpio_request_enable = nmk_gpio_request_enable,
|
|
.gpio_disable_free = nmk_gpio_disable_free,
|
|
};
|
|
|
|
int nmk_pin_config_get(struct pinctrl_dev *pctldev,
|
|
unsigned pin,
|
|
unsigned long *config)
|
|
{
|
|
/* Not implemented */
|
|
return -EINVAL;
|
|
}
|
|
|
|
int nmk_pin_config_set(struct pinctrl_dev *pctldev,
|
|
unsigned pin,
|
|
unsigned long config)
|
|
{
|
|
static const char *pullnames[] = {
|
|
[NMK_GPIO_PULL_NONE] = "none",
|
|
[NMK_GPIO_PULL_UP] = "up",
|
|
[NMK_GPIO_PULL_DOWN] = "down",
|
|
[3] /* illegal */ = "??"
|
|
};
|
|
static const char *slpmnames[] = {
|
|
[NMK_GPIO_SLPM_INPUT] = "input/wakeup",
|
|
[NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup",
|
|
};
|
|
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
struct nmk_gpio_chip *nmk_chip;
|
|
struct pinctrl_gpio_range *range;
|
|
struct gpio_chip *chip;
|
|
unsigned bit;
|
|
|
|
/*
|
|
* The pin config contains pin number and altfunction fields, here
|
|
* we just ignore that part. It's being handled by the framework and
|
|
* pinmux callback respectively.
|
|
*/
|
|
pin_cfg_t cfg = (pin_cfg_t) config;
|
|
int pull = PIN_PULL(cfg);
|
|
int slpm = PIN_SLPM(cfg);
|
|
int output = PIN_DIR(cfg);
|
|
int val = PIN_VAL(cfg);
|
|
bool lowemi = PIN_LOWEMI(cfg);
|
|
bool gpiomode = PIN_GPIOMODE(cfg);
|
|
bool sleep = PIN_SLEEPMODE(cfg);
|
|
|
|
range = nmk_match_gpio_range(pctldev, pin);
|
|
if (!range) {
|
|
dev_err(npct->dev, "invalid pin offset %d\n", pin);
|
|
return -EINVAL;
|
|
}
|
|
if (!range->gc) {
|
|
dev_err(npct->dev, "GPIO chip missing in range for pin %d\n",
|
|
pin);
|
|
return -EINVAL;
|
|
}
|
|
chip = range->gc;
|
|
nmk_chip = container_of(chip, struct nmk_gpio_chip, chip);
|
|
|
|
if (sleep) {
|
|
int slpm_pull = PIN_SLPM_PULL(cfg);
|
|
int slpm_output = PIN_SLPM_DIR(cfg);
|
|
int slpm_val = PIN_SLPM_VAL(cfg);
|
|
|
|
/* All pins go into GPIO mode at sleep */
|
|
gpiomode = true;
|
|
|
|
/*
|
|
* The SLPM_* values are normal values + 1 to allow zero to
|
|
* mean "same as normal".
|
|
*/
|
|
if (slpm_pull)
|
|
pull = slpm_pull - 1;
|
|
if (slpm_output)
|
|
output = slpm_output - 1;
|
|
if (slpm_val)
|
|
val = slpm_val - 1;
|
|
|
|
dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
|
|
pin,
|
|
slpm_pull ? pullnames[pull] : "same",
|
|
slpm_output ? (output ? "output" : "input") : "same",
|
|
slpm_val ? (val ? "high" : "low") : "same");
|
|
}
|
|
|
|
dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: pull %s, slpm %s (%s%s), lowemi %s\n",
|
|
pin, cfg, pullnames[pull], slpmnames[slpm],
|
|
output ? "output " : "input",
|
|
output ? (val ? "high" : "low") : "",
|
|
lowemi ? "on" : "off" );
|
|
|
|
clk_enable(nmk_chip->clk);
|
|
bit = pin % NMK_GPIO_PER_CHIP;
|
|
if (gpiomode)
|
|
/* No glitch when going to GPIO mode */
|
|
__nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO);
|
|
if (output)
|
|
__nmk_gpio_make_output(nmk_chip, bit, val);
|
|
else {
|
|
__nmk_gpio_make_input(nmk_chip, bit);
|
|
__nmk_gpio_set_pull(nmk_chip, bit, pull);
|
|
}
|
|
/* TODO: isn't this only applicable on output pins? */
|
|
__nmk_gpio_set_lowemi(nmk_chip, bit, lowemi);
|
|
|
|
__nmk_gpio_set_slpm(nmk_chip, bit, slpm);
|
|
clk_disable(nmk_chip->clk);
|
|
return 0;
|
|
}
|
|
|
|
static struct pinconf_ops nmk_pinconf_ops = {
|
|
.pin_config_get = nmk_pin_config_get,
|
|
.pin_config_set = nmk_pin_config_set,
|
|
};
|
|
|
|
static struct pinctrl_desc nmk_pinctrl_desc = {
|
|
.name = "pinctrl-nomadik",
|
|
.pctlops = &nmk_pinctrl_ops,
|
|
.pmxops = &nmk_pinmux_ops,
|
|
.confops = &nmk_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int __devinit nmk_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
const struct platform_device_id *platid = platform_get_device_id(pdev);
|
|
struct nmk_pinctrl *npct;
|
|
int i;
|
|
|
|
npct = devm_kzalloc(&pdev->dev, sizeof(*npct), GFP_KERNEL);
|
|
if (!npct)
|
|
return -ENOMEM;
|
|
|
|
/* Poke in other ASIC variants here */
|
|
if (platid->driver_data == PINCTRL_NMK_DB8500)
|
|
nmk_pinctrl_db8500_init(&npct->soc);
|
|
|
|
/*
|
|
* We need all the GPIO drivers to probe FIRST, or we will not be able
|
|
* to obtain references to the struct gpio_chip * for them, and we
|
|
* need this to proceed.
|
|
*/
|
|
for (i = 0; i < npct->soc->gpio_num_ranges; i++) {
|
|
if (!nmk_gpio_chips[i]) {
|
|
dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
|
|
devm_kfree(&pdev->dev, npct);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip;
|
|
}
|
|
|
|
nmk_pinctrl_desc.pins = npct->soc->pins;
|
|
nmk_pinctrl_desc.npins = npct->soc->npins;
|
|
npct->dev = &pdev->dev;
|
|
npct->pctl = pinctrl_register(&nmk_pinctrl_desc, &pdev->dev, npct);
|
|
if (!npct->pctl) {
|
|
dev_err(&pdev->dev, "could not register Nomadik pinctrl driver\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* We will handle a range of GPIO pins */
|
|
for (i = 0; i < npct->soc->gpio_num_ranges; i++)
|
|
pinctrl_add_gpio_range(npct->pctl, &npct->soc->gpio_ranges[i]);
|
|
|
|
platform_set_drvdata(pdev, npct);
|
|
dev_info(&pdev->dev, "initialized Nomadik pin control driver\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id nmk_gpio_match[] = {
|
|
{ .compatible = "st,nomadik-gpio", },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver nmk_gpio_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "gpio",
|
|
.of_match_table = nmk_gpio_match,
|
|
},
|
|
.probe = nmk_gpio_probe,
|
|
};
|
|
|
|
static const struct platform_device_id nmk_pinctrl_id[] = {
|
|
{ "pinctrl-stn8815", PINCTRL_NMK_STN8815 },
|
|
{ "pinctrl-db8500", PINCTRL_NMK_DB8500 },
|
|
};
|
|
|
|
static struct platform_driver nmk_pinctrl_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "pinctrl-nomadik",
|
|
},
|
|
.probe = nmk_pinctrl_probe,
|
|
.id_table = nmk_pinctrl_id,
|
|
};
|
|
|
|
static int __init nmk_gpio_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = platform_driver_register(&nmk_gpio_driver);
|
|
if (ret)
|
|
return ret;
|
|
return platform_driver_register(&nmk_pinctrl_driver);
|
|
}
|
|
|
|
core_initcall(nmk_gpio_init);
|
|
|
|
MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
|
|
MODULE_DESCRIPTION("Nomadik GPIO Driver");
|
|
MODULE_LICENSE("GPL");
|