2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
linux-next/drivers/crypto/atmel-sha-regs.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

77 lines
2.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ATMEL_SHA_REGS_H__
#define __ATMEL_SHA_REGS_H__
#define SHA_REG_DIGEST(x) (0x80 + ((x) * 0x04))
#define SHA_REG_DIN(x) (0x40 + ((x) * 0x04))
#define SHA_CR 0x00
#define SHA_CR_START (1 << 0)
#define SHA_CR_FIRST (1 << 4)
#define SHA_CR_SWRST (1 << 8)
#define SHA_CR_WUIHV (1 << 12)
#define SHA_CR_WUIEHV (1 << 13)
#define SHA_MR 0x04
#define SHA_MR_MODE_MASK (0x3 << 0)
#define SHA_MR_MODE_MANUAL 0x0
#define SHA_MR_MODE_AUTO 0x1
#define SHA_MR_MODE_PDC 0x2
#define SHA_MR_MODE_IDATAR0 0x2
#define SHA_MR_PROCDLY (1 << 4)
#define SHA_MR_UIHV (1 << 5)
#define SHA_MR_UIEHV (1 << 6)
#define SHA_MR_ALGO_MASK GENMASK(10, 8)
#define SHA_MR_ALGO_SHA1 (0 << 8)
#define SHA_MR_ALGO_SHA256 (1 << 8)
#define SHA_MR_ALGO_SHA384 (2 << 8)
#define SHA_MR_ALGO_SHA512 (3 << 8)
#define SHA_MR_ALGO_SHA224 (4 << 8)
#define SHA_MR_HMAC (1 << 11)
#define SHA_MR_DUALBUFF (1 << 16)
#define SHA_FLAGS_ALGO_MASK SHA_MR_ALGO_MASK
#define SHA_FLAGS_SHA1 SHA_MR_ALGO_SHA1
#define SHA_FLAGS_SHA256 SHA_MR_ALGO_SHA256
#define SHA_FLAGS_SHA384 SHA_MR_ALGO_SHA384
#define SHA_FLAGS_SHA512 SHA_MR_ALGO_SHA512
#define SHA_FLAGS_SHA224 SHA_MR_ALGO_SHA224
#define SHA_FLAGS_HMAC SHA_MR_HMAC
#define SHA_FLAGS_HMAC_SHA1 (SHA_FLAGS_HMAC | SHA_FLAGS_SHA1)
#define SHA_FLAGS_HMAC_SHA256 (SHA_FLAGS_HMAC | SHA_FLAGS_SHA256)
#define SHA_FLAGS_HMAC_SHA384 (SHA_FLAGS_HMAC | SHA_FLAGS_SHA384)
#define SHA_FLAGS_HMAC_SHA512 (SHA_FLAGS_HMAC | SHA_FLAGS_SHA512)
#define SHA_FLAGS_HMAC_SHA224 (SHA_FLAGS_HMAC | SHA_FLAGS_SHA224)
#define SHA_FLAGS_MODE_MASK (SHA_FLAGS_HMAC | SHA_FLAGS_ALGO_MASK)
#define SHA_IER 0x10
#define SHA_IDR 0x14
#define SHA_IMR 0x18
#define SHA_ISR 0x1C
#define SHA_INT_DATARDY (1 << 0)
#define SHA_INT_ENDTX (1 << 1)
#define SHA_INT_TXBUFE (1 << 2)
#define SHA_INT_URAD (1 << 8)
#define SHA_ISR_URAT_MASK (0x7 << 12)
#define SHA_ISR_URAT_IDR (0x0 << 12)
#define SHA_ISR_URAT_ODR (0x1 << 12)
#define SHA_ISR_URAT_MR (0x2 << 12)
#define SHA_ISR_URAT_WO (0x5 << 12)
#define SHA_MSR 0x20
#define SHA_BCR 0x30
#define SHA_HW_VERSION 0xFC
#define SHA_TPR 0x108
#define SHA_TCR 0x10C
#define SHA_TNPR 0x118
#define SHA_TNCR 0x11C
#define SHA_PTCR 0x120
#define SHA_PTCR_TXTEN (1 << 8)
#define SHA_PTCR_TXTDIS (1 << 9)
#define SHA_PTSR 0x124
#define SHA_PTSR_TXTEN (1 << 8)
#endif /* __ATMEL_SHA_REGS_H__ */