mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 13:13:57 +08:00
a737e835e5
Neaten the logging a bit by adding #define pr_fmt Miscellanea: o Remove __FILE__/__func__ uses o Coalesce formats adding missing spaces o Align arguments o (rtc-cmos) Integrated 2 consecutive messages Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
516 lines
13 KiB
C
516 lines
13 KiB
C
/*
|
|
* RTC client/driver for the Maxim/Dallas DS3232 Real-Time Clock over I2C
|
|
*
|
|
* Copyright (C) 2009-2011 Freescale Semiconductor.
|
|
* Author: Jack Lan <jack.lan@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
/*
|
|
* It would be more efficient to use i2c msgs/i2c_transfer directly but, as
|
|
* recommened in .../Documentation/i2c/writing-clients section
|
|
* "Sending and receiving", using SMBus level communication is preferred.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define DS3232_REG_SECONDS 0x00
|
|
#define DS3232_REG_MINUTES 0x01
|
|
#define DS3232_REG_HOURS 0x02
|
|
#define DS3232_REG_AMPM 0x02
|
|
#define DS3232_REG_DAY 0x03
|
|
#define DS3232_REG_DATE 0x04
|
|
#define DS3232_REG_MONTH 0x05
|
|
#define DS3232_REG_CENTURY 0x05
|
|
#define DS3232_REG_YEAR 0x06
|
|
#define DS3232_REG_ALARM1 0x07 /* Alarm 1 BASE */
|
|
#define DS3232_REG_ALARM2 0x0B /* Alarm 2 BASE */
|
|
#define DS3232_REG_CR 0x0E /* Control register */
|
|
# define DS3232_REG_CR_nEOSC 0x80
|
|
# define DS3232_REG_CR_INTCN 0x04
|
|
# define DS3232_REG_CR_A2IE 0x02
|
|
# define DS3232_REG_CR_A1IE 0x01
|
|
|
|
#define DS3232_REG_SR 0x0F /* control/status register */
|
|
# define DS3232_REG_SR_OSF 0x80
|
|
# define DS3232_REG_SR_BSY 0x04
|
|
# define DS3232_REG_SR_A2F 0x02
|
|
# define DS3232_REG_SR_A1F 0x01
|
|
|
|
struct ds3232 {
|
|
struct i2c_client *client;
|
|
struct rtc_device *rtc;
|
|
struct work_struct work;
|
|
|
|
/* The mutex protects alarm operations, and prevents a race
|
|
* between the enable_irq() in the workqueue and the free_irq()
|
|
* in the remove function.
|
|
*/
|
|
struct mutex mutex;
|
|
bool suspended;
|
|
int exiting;
|
|
};
|
|
|
|
static struct i2c_driver ds3232_driver;
|
|
|
|
static int ds3232_check_rtc_status(struct i2c_client *client)
|
|
{
|
|
int ret = 0;
|
|
int control, stat;
|
|
|
|
stat = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
|
|
if (stat < 0)
|
|
return stat;
|
|
|
|
if (stat & DS3232_REG_SR_OSF)
|
|
dev_warn(&client->dev,
|
|
"oscillator discontinuity flagged, "
|
|
"time unreliable\n");
|
|
|
|
stat &= ~(DS3232_REG_SR_OSF | DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
|
|
|
|
ret = i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* If the alarm is pending, clear it before requesting
|
|
* the interrupt, so an interrupt event isn't reported
|
|
* before everything is initialized.
|
|
*/
|
|
|
|
control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
|
|
if (control < 0)
|
|
return control;
|
|
|
|
control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
|
|
control |= DS3232_REG_CR_INTCN;
|
|
|
|
return i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
|
|
}
|
|
|
|
static int ds3232_read_time(struct device *dev, struct rtc_time *time)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int ret;
|
|
u8 buf[7];
|
|
unsigned int year, month, day, hour, minute, second;
|
|
unsigned int week, twelve_hr, am_pm;
|
|
unsigned int century, add_century = 0;
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(client, DS3232_REG_SECONDS, 7, buf);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret < 7)
|
|
return -EIO;
|
|
|
|
second = buf[0];
|
|
minute = buf[1];
|
|
hour = buf[2];
|
|
week = buf[3];
|
|
day = buf[4];
|
|
month = buf[5];
|
|
year = buf[6];
|
|
|
|
/* Extract additional information for AM/PM and century */
|
|
|
|
twelve_hr = hour & 0x40;
|
|
am_pm = hour & 0x20;
|
|
century = month & 0x80;
|
|
|
|
/* Write to rtc_time structure */
|
|
|
|
time->tm_sec = bcd2bin(second);
|
|
time->tm_min = bcd2bin(minute);
|
|
if (twelve_hr) {
|
|
/* Convert to 24 hr */
|
|
if (am_pm)
|
|
time->tm_hour = bcd2bin(hour & 0x1F) + 12;
|
|
else
|
|
time->tm_hour = bcd2bin(hour & 0x1F);
|
|
} else {
|
|
time->tm_hour = bcd2bin(hour);
|
|
}
|
|
|
|
/* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
|
|
time->tm_wday = bcd2bin(week) - 1;
|
|
time->tm_mday = bcd2bin(day);
|
|
/* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
|
|
time->tm_mon = bcd2bin(month & 0x7F) - 1;
|
|
if (century)
|
|
add_century = 100;
|
|
|
|
time->tm_year = bcd2bin(year) + add_century;
|
|
|
|
return rtc_valid_tm(time);
|
|
}
|
|
|
|
static int ds3232_set_time(struct device *dev, struct rtc_time *time)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
u8 buf[7];
|
|
|
|
/* Extract time from rtc_time and load into ds3232*/
|
|
|
|
buf[0] = bin2bcd(time->tm_sec);
|
|
buf[1] = bin2bcd(time->tm_min);
|
|
buf[2] = bin2bcd(time->tm_hour);
|
|
/* Day of the week in linux range is 0~6 while 1~7 in RTC chip */
|
|
buf[3] = bin2bcd(time->tm_wday + 1);
|
|
buf[4] = bin2bcd(time->tm_mday); /* Date */
|
|
/* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */
|
|
buf[5] = bin2bcd(time->tm_mon + 1);
|
|
if (time->tm_year >= 100) {
|
|
buf[5] |= 0x80;
|
|
buf[6] = bin2bcd(time->tm_year - 100);
|
|
} else {
|
|
buf[6] = bin2bcd(time->tm_year);
|
|
}
|
|
|
|
return i2c_smbus_write_i2c_block_data(client,
|
|
DS3232_REG_SECONDS, 7, buf);
|
|
}
|
|
|
|
/*
|
|
* DS3232 has two alarm, we only use alarm1
|
|
* According to linux specification, only support one-shot alarm
|
|
* no periodic alarm mode
|
|
*/
|
|
static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ds3232 *ds3232 = i2c_get_clientdata(client);
|
|
int control, stat;
|
|
int ret;
|
|
u8 buf[4];
|
|
|
|
mutex_lock(&ds3232->mutex);
|
|
|
|
ret = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
|
|
if (ret < 0)
|
|
goto out;
|
|
stat = ret;
|
|
ret = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
|
|
if (ret < 0)
|
|
goto out;
|
|
control = ret;
|
|
ret = i2c_smbus_read_i2c_block_data(client, DS3232_REG_ALARM1, 4, buf);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
alarm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
|
|
alarm->time.tm_min = bcd2bin(buf[1] & 0x7F);
|
|
alarm->time.tm_hour = bcd2bin(buf[2] & 0x7F);
|
|
alarm->time.tm_mday = bcd2bin(buf[3] & 0x7F);
|
|
|
|
alarm->time.tm_mon = -1;
|
|
alarm->time.tm_year = -1;
|
|
alarm->time.tm_wday = -1;
|
|
alarm->time.tm_yday = -1;
|
|
alarm->time.tm_isdst = -1;
|
|
|
|
alarm->enabled = !!(control & DS3232_REG_CR_A1IE);
|
|
alarm->pending = !!(stat & DS3232_REG_SR_A1F);
|
|
|
|
ret = 0;
|
|
out:
|
|
mutex_unlock(&ds3232->mutex);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* linux rtc-module does not support wday alarm
|
|
* and only 24h time mode supported indeed
|
|
*/
|
|
static int ds3232_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ds3232 *ds3232 = i2c_get_clientdata(client);
|
|
int control, stat;
|
|
int ret;
|
|
u8 buf[4];
|
|
|
|
if (client->irq <= 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&ds3232->mutex);
|
|
|
|
buf[0] = bin2bcd(alarm->time.tm_sec);
|
|
buf[1] = bin2bcd(alarm->time.tm_min);
|
|
buf[2] = bin2bcd(alarm->time.tm_hour);
|
|
buf[3] = bin2bcd(alarm->time.tm_mday);
|
|
|
|
/* clear alarm interrupt enable bit */
|
|
ret = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
|
|
if (ret < 0)
|
|
goto out;
|
|
control = ret;
|
|
control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
|
|
ret = i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* clear any pending alarm flag */
|
|
ret = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
|
|
if (ret < 0)
|
|
goto out;
|
|
stat = ret;
|
|
stat &= ~(DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
|
|
ret = i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = i2c_smbus_write_i2c_block_data(client, DS3232_REG_ALARM1, 4, buf);
|
|
|
|
if (alarm->enabled) {
|
|
control |= DS3232_REG_CR_A1IE;
|
|
ret = i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
|
|
}
|
|
out:
|
|
mutex_unlock(&ds3232->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void ds3232_update_alarm(struct i2c_client *client)
|
|
{
|
|
struct ds3232 *ds3232 = i2c_get_clientdata(client);
|
|
int control;
|
|
int ret;
|
|
u8 buf[4];
|
|
|
|
mutex_lock(&ds3232->mutex);
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(client, DS3232_REG_ALARM1, 4, buf);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
buf[0] = bcd2bin(buf[0]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ?
|
|
0x80 : buf[0];
|
|
buf[1] = bcd2bin(buf[1]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ?
|
|
0x80 : buf[1];
|
|
buf[2] = bcd2bin(buf[2]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ?
|
|
0x80 : buf[2];
|
|
buf[3] = bcd2bin(buf[3]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ?
|
|
0x80 : buf[3];
|
|
|
|
ret = i2c_smbus_write_i2c_block_data(client, DS3232_REG_ALARM1, 4, buf);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
|
|
if (control < 0)
|
|
goto unlock;
|
|
|
|
if (ds3232->rtc->irq_data & (RTC_AF | RTC_UF))
|
|
/* enable alarm1 interrupt */
|
|
control |= DS3232_REG_CR_A1IE;
|
|
else
|
|
/* disable alarm1 interrupt */
|
|
control &= ~(DS3232_REG_CR_A1IE);
|
|
i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
|
|
|
|
unlock:
|
|
mutex_unlock(&ds3232->mutex);
|
|
}
|
|
|
|
static int ds3232_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ds3232 *ds3232 = i2c_get_clientdata(client);
|
|
|
|
if (client->irq <= 0)
|
|
return -EINVAL;
|
|
|
|
if (enabled)
|
|
ds3232->rtc->irq_data |= RTC_AF;
|
|
else
|
|
ds3232->rtc->irq_data &= ~RTC_AF;
|
|
|
|
ds3232_update_alarm(client);
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t ds3232_irq(int irq, void *dev_id)
|
|
{
|
|
struct i2c_client *client = dev_id;
|
|
struct ds3232 *ds3232 = i2c_get_clientdata(client);
|
|
|
|
disable_irq_nosync(irq);
|
|
|
|
/*
|
|
* If rtc as a wakeup source, can't schedule the work
|
|
* at system resume flow, because at this time the i2c bus
|
|
* has not been resumed.
|
|
*/
|
|
if (!ds3232->suspended)
|
|
schedule_work(&ds3232->work);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void ds3232_work(struct work_struct *work)
|
|
{
|
|
struct ds3232 *ds3232 = container_of(work, struct ds3232, work);
|
|
struct i2c_client *client = ds3232->client;
|
|
int stat, control;
|
|
|
|
mutex_lock(&ds3232->mutex);
|
|
|
|
stat = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
|
|
if (stat < 0)
|
|
goto unlock;
|
|
|
|
if (stat & DS3232_REG_SR_A1F) {
|
|
control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
|
|
if (control < 0) {
|
|
pr_warn("Read Control Register error - Disable IRQ%d\n",
|
|
client->irq);
|
|
} else {
|
|
/* disable alarm1 interrupt */
|
|
control &= ~(DS3232_REG_CR_A1IE);
|
|
i2c_smbus_write_byte_data(client, DS3232_REG_CR,
|
|
control);
|
|
|
|
/* clear the alarm pend flag */
|
|
stat &= ~DS3232_REG_SR_A1F;
|
|
i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
|
|
|
|
rtc_update_irq(ds3232->rtc, 1, RTC_AF | RTC_IRQF);
|
|
|
|
if (!ds3232->exiting)
|
|
enable_irq(client->irq);
|
|
}
|
|
}
|
|
|
|
unlock:
|
|
mutex_unlock(&ds3232->mutex);
|
|
}
|
|
|
|
static const struct rtc_class_ops ds3232_rtc_ops = {
|
|
.read_time = ds3232_read_time,
|
|
.set_time = ds3232_set_time,
|
|
.read_alarm = ds3232_read_alarm,
|
|
.set_alarm = ds3232_set_alarm,
|
|
.alarm_irq_enable = ds3232_alarm_irq_enable,
|
|
};
|
|
|
|
static int ds3232_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ds3232 *ds3232;
|
|
int ret;
|
|
|
|
ds3232 = devm_kzalloc(&client->dev, sizeof(struct ds3232), GFP_KERNEL);
|
|
if (!ds3232)
|
|
return -ENOMEM;
|
|
|
|
ds3232->client = client;
|
|
i2c_set_clientdata(client, ds3232);
|
|
|
|
INIT_WORK(&ds3232->work, ds3232_work);
|
|
mutex_init(&ds3232->mutex);
|
|
|
|
ret = ds3232_check_rtc_status(client);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (client->irq > 0) {
|
|
ret = devm_request_irq(&client->dev, client->irq, ds3232_irq,
|
|
IRQF_SHARED, "ds3232", client);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to request IRQ\n");
|
|
}
|
|
device_init_wakeup(&client->dev, 1);
|
|
}
|
|
ds3232->rtc = devm_rtc_device_register(&client->dev, client->name,
|
|
&ds3232_rtc_ops, THIS_MODULE);
|
|
return PTR_ERR_OR_ZERO(ds3232->rtc);
|
|
}
|
|
|
|
static int ds3232_remove(struct i2c_client *client)
|
|
{
|
|
struct ds3232 *ds3232 = i2c_get_clientdata(client);
|
|
|
|
if (client->irq >= 0) {
|
|
mutex_lock(&ds3232->mutex);
|
|
ds3232->exiting = 1;
|
|
mutex_unlock(&ds3232->mutex);
|
|
|
|
devm_free_irq(&client->dev, client->irq, client);
|
|
cancel_work_sync(&ds3232->work);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int ds3232_suspend(struct device *dev)
|
|
{
|
|
struct ds3232 *ds3232 = dev_get_drvdata(dev);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (device_can_wakeup(dev)) {
|
|
ds3232->suspended = true;
|
|
irq_set_irq_wake(client->irq, 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds3232_resume(struct device *dev)
|
|
{
|
|
struct ds3232 *ds3232 = dev_get_drvdata(dev);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (ds3232->suspended) {
|
|
ds3232->suspended = false;
|
|
|
|
/* Clear the hardware alarm pend flag */
|
|
schedule_work(&ds3232->work);
|
|
|
|
irq_set_irq_wake(client->irq, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops ds3232_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(ds3232_suspend, ds3232_resume)
|
|
};
|
|
|
|
static const struct i2c_device_id ds3232_id[] = {
|
|
{ "ds3232", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ds3232_id);
|
|
|
|
static struct i2c_driver ds3232_driver = {
|
|
.driver = {
|
|
.name = "rtc-ds3232",
|
|
.owner = THIS_MODULE,
|
|
.pm = &ds3232_pm_ops,
|
|
},
|
|
.probe = ds3232_probe,
|
|
.remove = ds3232_remove,
|
|
.id_table = ds3232_id,
|
|
};
|
|
|
|
module_i2c_driver(ds3232_driver);
|
|
|
|
MODULE_AUTHOR("Srikanth Srinivasan <srikanth.srinivasan@freescale.com>");
|
|
MODULE_DESCRIPTION("Maxim/Dallas DS3232 RTC Driver");
|
|
MODULE_LICENSE("GPL");
|