mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-04 03:14:02 +08:00
964e186547
After commitb8a1a4cd5a
("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then03c835f498
("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20230505220218.1239542-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org
165 lines
4.2 KiB
C
165 lines
4.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2022, Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define MAX20411_UV_STEP 6250
|
|
#define MAX20411_BASE_UV 243750
|
|
#define MAX20411_MIN_SEL 41 /* 0.5V */
|
|
#define MAX20411_MAX_SEL 165 /* 1.275V */
|
|
#define MAX20411_VID_OFFSET 0x7
|
|
#define MAX20411_VID_MASK 0xff
|
|
#define MAX20411_SLEW_OFFSET 0x6
|
|
#define MAX20411_SLEW_DVS_MASK 0xc
|
|
#define MAX20411_SLEW_SR_MASK 0x3
|
|
|
|
struct max20411 {
|
|
struct device *dev;
|
|
struct device_node *of_node;
|
|
struct regulator_desc desc;
|
|
struct regulator_dev *rdev;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static const unsigned int max20411_slew_rates[] = { 13100, 6600, 3300, 1600 };
|
|
|
|
static int max20411_enable_time(struct regulator_dev *rdev)
|
|
{
|
|
int voltage, rate, ret;
|
|
unsigned int val;
|
|
|
|
/* get voltage */
|
|
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= rdev->desc->vsel_mask;
|
|
voltage = regulator_list_voltage_linear(rdev, val);
|
|
|
|
/* get rate */
|
|
ret = regmap_read(rdev->regmap, MAX20411_SLEW_OFFSET, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = FIELD_GET(MAX20411_SLEW_SR_MASK, val);
|
|
rate = max20411_slew_rates[val];
|
|
|
|
return DIV_ROUND_UP(voltage, rate);
|
|
}
|
|
|
|
static const struct regmap_config max20411_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xe,
|
|
};
|
|
|
|
static const struct regulator_ops max20411_ops = {
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.enable_time = max20411_enable_time,
|
|
};
|
|
|
|
static const struct regulator_desc max20411_desc = {
|
|
.ops = &max20411_ops,
|
|
.owner = THIS_MODULE,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.supply_name = "vin",
|
|
.name = "max20411",
|
|
|
|
/*
|
|
* voltage = 0.24375V + selector * 6.25mV
|
|
* with valid selector between 41 to 165 (0.5V to 1.275V)
|
|
*/
|
|
.min_uV = MAX20411_BASE_UV,
|
|
.uV_step = MAX20411_UV_STEP,
|
|
.linear_min_sel = MAX20411_MIN_SEL,
|
|
.n_voltages = MAX20411_MAX_SEL + 1,
|
|
|
|
.vsel_reg = MAX20411_VID_OFFSET,
|
|
.vsel_mask = MAX20411_VID_MASK,
|
|
|
|
.ramp_reg = MAX20411_SLEW_OFFSET,
|
|
.ramp_mask = MAX20411_SLEW_DVS_MASK,
|
|
.ramp_delay_table = max20411_slew_rates,
|
|
.n_ramp_values = ARRAY_SIZE(max20411_slew_rates),
|
|
};
|
|
|
|
static int max20411_probe(struct i2c_client *client)
|
|
{
|
|
struct regulator_init_data *init_data;
|
|
struct device *dev = &client->dev;
|
|
struct regulator_config cfg = {};
|
|
struct max20411 *max20411;
|
|
|
|
max20411 = devm_kzalloc(dev, sizeof(*max20411), GFP_KERNEL);
|
|
if (!max20411)
|
|
return -ENOMEM;
|
|
|
|
max20411->regmap = devm_regmap_init_i2c(client, &max20411_regmap_config);
|
|
if (IS_ERR(max20411->regmap)) {
|
|
dev_err(dev, "Failed to allocate regmap!\n");
|
|
return PTR_ERR(max20411->regmap);
|
|
}
|
|
|
|
max20411->dev = dev;
|
|
max20411->of_node = dev->of_node;
|
|
|
|
max20411->desc = max20411_desc;
|
|
init_data = of_get_regulator_init_data(max20411->dev, max20411->of_node, &max20411->desc);
|
|
if (!init_data)
|
|
return -ENODATA;
|
|
|
|
cfg.dev = max20411->dev;
|
|
cfg.init_data = init_data;
|
|
cfg.of_node = max20411->of_node;
|
|
cfg.driver_data = max20411;
|
|
|
|
cfg.ena_gpiod = gpiod_get(max20411->dev, "enable", GPIOD_ASIS);
|
|
if (IS_ERR(cfg.ena_gpiod))
|
|
return dev_err_probe(dev, PTR_ERR(cfg.ena_gpiod),
|
|
"unable to acquire enable gpio\n");
|
|
|
|
max20411->rdev = devm_regulator_register(max20411->dev, &max20411->desc, &cfg);
|
|
if (IS_ERR(max20411->rdev))
|
|
dev_err(max20411->dev, "Failed to register regulator\n");
|
|
|
|
return PTR_ERR_OR_ZERO(max20411->rdev);
|
|
}
|
|
|
|
static const struct of_device_id of_max20411_match_tbl[] = {
|
|
{ .compatible = "maxim,max20411", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_max20411_match_tbl);
|
|
|
|
static const struct i2c_device_id max20411_id[] = {
|
|
{ "max20411", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max20411_id);
|
|
|
|
static struct i2c_driver max20411_i2c_driver = {
|
|
.driver = {
|
|
.name = "max20411",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = of_max20411_match_tbl,
|
|
},
|
|
.probe = max20411_probe,
|
|
.id_table = max20411_id,
|
|
};
|
|
module_i2c_driver(max20411_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|