2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 14:14:01 +08:00
linux-next/drivers/s390/cio/device_id.c
Cornelia Huck a8237fc410 [PATCH] s390: introduce struct subchannel_id
This patch introduces a struct subchannel_id containing the subchannel number
(formerly referred to as "irq") and switches code formerly relying on the
subchannel number over to it.

While we're touching inline assemblies anyway, make sure they have correct
memory constraints.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:51 -08:00

356 lines
9.0 KiB
C

/*
* drivers/s390/cio/device_id.c
*
* Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
* Author(s): Cornelia Huck(cohuck@de.ibm.com)
* Martin Schwidefsky (schwidefsky@de.ibm.com)
*
* Sense ID functions.
*/
#include <linux/module.h>
#include <linux/config.h>
#include <linux/init.h>
#include <asm/ccwdev.h>
#include <asm/delay.h>
#include <asm/cio.h>
#include <asm/lowcore.h>
#include "cio.h"
#include "cio_debug.h"
#include "css.h"
#include "device.h"
#include "ioasm.h"
/*
* diag210 is used under VM to get information about a virtual device
*/
#ifdef CONFIG_ARCH_S390X
int
diag210(struct diag210 * addr)
{
/*
* diag 210 needs its data below the 2GB border, so we
* use a static data area to be sure
*/
static struct diag210 diag210_tmp;
static DEFINE_SPINLOCK(diag210_lock);
unsigned long flags;
int ccode;
spin_lock_irqsave(&diag210_lock, flags);
diag210_tmp = *addr;
asm volatile (
" lhi %0,-1\n"
" sam31\n"
" diag %1,0,0x210\n"
"0: ipm %0\n"
" srl %0,28\n"
"1: sam64\n"
".section __ex_table,\"a\"\n"
" .align 8\n"
" .quad 0b,1b\n"
".previous"
: "=&d" (ccode) : "a" (__pa(&diag210_tmp)) : "cc", "memory" );
*addr = diag210_tmp;
spin_unlock_irqrestore(&diag210_lock, flags);
return ccode;
}
#else
int
diag210(struct diag210 * addr)
{
int ccode;
asm volatile (
" lhi %0,-1\n"
" diag %1,0,0x210\n"
"0: ipm %0\n"
" srl %0,28\n"
"1:\n"
".section __ex_table,\"a\"\n"
" .align 4\n"
" .long 0b,1b\n"
".previous"
: "=&d" (ccode) : "a" (__pa(addr)) : "cc", "memory" );
return ccode;
}
#endif
/*
* Input :
* devno - device number
* ps - pointer to sense ID data area
* Output : none
*/
static void
VM_virtual_device_info (__u16 devno, struct senseid *ps)
{
static struct {
int vrdcvcla, vrdcvtyp, cu_type;
} vm_devices[] = {
{ 0x08, 0x01, 0x3480 },
{ 0x08, 0x02, 0x3430 },
{ 0x08, 0x10, 0x3420 },
{ 0x08, 0x42, 0x3424 },
{ 0x08, 0x44, 0x9348 },
{ 0x08, 0x81, 0x3490 },
{ 0x08, 0x82, 0x3422 },
{ 0x10, 0x41, 0x1403 },
{ 0x10, 0x42, 0x3211 },
{ 0x10, 0x43, 0x3203 },
{ 0x10, 0x45, 0x3800 },
{ 0x10, 0x47, 0x3262 },
{ 0x10, 0x48, 0x3820 },
{ 0x10, 0x49, 0x3800 },
{ 0x10, 0x4a, 0x4245 },
{ 0x10, 0x4b, 0x4248 },
{ 0x10, 0x4d, 0x3800 },
{ 0x10, 0x4e, 0x3820 },
{ 0x10, 0x4f, 0x3820 },
{ 0x10, 0x82, 0x2540 },
{ 0x10, 0x84, 0x3525 },
{ 0x20, 0x81, 0x2501 },
{ 0x20, 0x82, 0x2540 },
{ 0x20, 0x84, 0x3505 },
{ 0x40, 0x01, 0x3278 },
{ 0x40, 0x04, 0x3277 },
{ 0x40, 0x80, 0x2250 },
{ 0x40, 0xc0, 0x5080 },
{ 0x80, 0x00, 0x3215 },
};
struct diag210 diag_data;
int ccode, i;
CIO_TRACE_EVENT (4, "VMvdinf");
diag_data = (struct diag210) {
.vrdcdvno = devno,
.vrdclen = sizeof (diag_data),
};
ccode = diag210 (&diag_data);
ps->reserved = 0xff;
/* Special case for bloody osa devices. */
if (diag_data.vrdcvcla == 0x02 &&
diag_data.vrdcvtyp == 0x20) {
ps->cu_type = 0x3088;
ps->cu_model = 0x60;
return;
}
for (i = 0; i < sizeof(vm_devices) / sizeof(vm_devices[0]); i++)
if (diag_data.vrdcvcla == vm_devices[i].vrdcvcla &&
diag_data.vrdcvtyp == vm_devices[i].vrdcvtyp) {
ps->cu_type = vm_devices[i].cu_type;
return;
}
CIO_MSG_EVENT(0, "DIAG X'210' for device %04X returned (cc = %d):"
"vdev class : %02X, vdev type : %04X \n ... "
"rdev class : %02X, rdev type : %04X, "
"rdev model: %02X\n",
devno, ccode,
diag_data.vrdcvcla, diag_data.vrdcvtyp,
diag_data.vrdcrccl, diag_data.vrdccrty,
diag_data.vrdccrmd);
}
/*
* Start Sense ID helper function.
* Try to obtain the 'control unit'/'device type' information
* associated with the subchannel.
*/
static int
__ccw_device_sense_id_start(struct ccw_device *cdev)
{
struct subchannel *sch;
struct ccw1 *ccw;
int ret;
sch = to_subchannel(cdev->dev.parent);
/* Setup sense channel program. */
ccw = cdev->private->iccws;
if (sch->schib.pmcw.pim != 0x80) {
/* more than one path installed. */
ccw->cmd_code = CCW_CMD_SUSPEND_RECONN;
ccw->cda = 0;
ccw->count = 0;
ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC;
ccw++;
}
ccw->cmd_code = CCW_CMD_SENSE_ID;
ccw->cda = (__u32) __pa (&cdev->private->senseid);
ccw->count = sizeof (struct senseid);
ccw->flags = CCW_FLAG_SLI;
/* Reset device status. */
memset(&cdev->private->irb, 0, sizeof(struct irb));
/* Try on every path. */
ret = -ENODEV;
while (cdev->private->imask != 0) {
if ((sch->opm & cdev->private->imask) != 0 &&
cdev->private->iretry > 0) {
cdev->private->iretry--;
ret = cio_start (sch, cdev->private->iccws,
cdev->private->imask);
/* ret is 0, -EBUSY, -EACCES or -ENODEV */
if (ret != -EACCES)
return ret;
}
cdev->private->imask >>= 1;
cdev->private->iretry = 5;
}
return ret;
}
void
ccw_device_sense_id_start(struct ccw_device *cdev)
{
int ret;
memset (&cdev->private->senseid, 0, sizeof (struct senseid));
cdev->private->senseid.cu_type = 0xFFFF;
cdev->private->imask = 0x80;
cdev->private->iretry = 5;
ret = __ccw_device_sense_id_start(cdev);
if (ret && ret != -EBUSY)
ccw_device_sense_id_done(cdev, ret);
}
/*
* Called from interrupt context to check if a valid answer
* to Sense ID was received.
*/
static int
ccw_device_check_sense_id(struct ccw_device *cdev)
{
struct subchannel *sch;
struct irb *irb;
sch = to_subchannel(cdev->dev.parent);
irb = &cdev->private->irb;
/* Did we get a proper answer ? */
if (cdev->private->senseid.cu_type != 0xFFFF &&
cdev->private->senseid.reserved == 0xFF) {
if (irb->scsw.count < sizeof (struct senseid) - 8)
cdev->private->flags.esid = 1;
return 0; /* Success */
}
/* Check the error cases. */
if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC))
return -ETIME;
if (irb->esw.esw0.erw.cons && (irb->ecw[0] & SNS0_CMD_REJECT)) {
/*
* if the device doesn't support the SenseID
* command further retries wouldn't help ...
* NB: We don't check here for intervention required like we
* did before, because tape devices with no tape inserted
* may present this status *in conjunction with* the
* sense id information. So, for intervention required,
* we use the "whack it until it talks" strategy...
*/
CIO_MSG_EVENT(2, "SenseID : device %04x on Subchannel %04x "
"reports cmd reject\n",
cdev->private->devno, sch->schid.sch_no);
return -EOPNOTSUPP;
}
if (irb->esw.esw0.erw.cons) {
CIO_MSG_EVENT(2, "SenseID : UC on dev %04x, "
"lpum %02X, cnt %02d, sns :"
" %02X%02X%02X%02X %02X%02X%02X%02X ...\n",
cdev->private->devno,
irb->esw.esw0.sublog.lpum,
irb->esw.esw0.erw.scnt,
irb->ecw[0], irb->ecw[1],
irb->ecw[2], irb->ecw[3],
irb->ecw[4], irb->ecw[5],
irb->ecw[6], irb->ecw[7]);
return -EAGAIN;
}
if (irb->scsw.cc == 3) {
if ((sch->orb.lpm &
sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0)
CIO_MSG_EVENT(2, "SenseID : path %02X for device %04x on"
" subchannel %04x is 'not operational'\n",
sch->orb.lpm, cdev->private->devno,
sch->schid.sch_no);
return -EACCES;
}
/* Hmm, whatever happened, try again. */
CIO_MSG_EVENT(2, "SenseID : start_IO() for device %04x on "
"subchannel %04x returns status %02X%02X\n",
cdev->private->devno, sch->schid.sch_no,
irb->scsw.dstat, irb->scsw.cstat);
return -EAGAIN;
}
/*
* Got interrupt for Sense ID.
*/
void
ccw_device_sense_id_irq(struct ccw_device *cdev, enum dev_event dev_event)
{
struct subchannel *sch;
struct irb *irb;
int ret;
sch = to_subchannel(cdev->dev.parent);
irb = (struct irb *) __LC_IRB;
/* Retry sense id, if needed. */
if (irb->scsw.stctl ==
(SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
if ((irb->scsw.cc == 1) || !irb->scsw.actl) {
ret = __ccw_device_sense_id_start(cdev);
if (ret && ret != -EBUSY)
ccw_device_sense_id_done(cdev, ret);
}
return;
}
if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
return;
ret = ccw_device_check_sense_id(cdev);
memset(&cdev->private->irb, 0, sizeof(struct irb));
switch (ret) {
/* 0, -ETIME, -EOPNOTSUPP, -EAGAIN or -EACCES */
case 0: /* Sense id succeeded. */
case -ETIME: /* Sense id stopped by timeout. */
ccw_device_sense_id_done(cdev, ret);
break;
case -EACCES: /* channel is not operational. */
sch->lpm &= ~cdev->private->imask;
cdev->private->imask >>= 1;
cdev->private->iretry = 5;
/* fall through. */
case -EAGAIN: /* try again. */
ret = __ccw_device_sense_id_start(cdev);
if (ret == 0 || ret == -EBUSY)
break;
/* fall through. */
default: /* Sense ID failed. Try asking VM. */
if (MACHINE_IS_VM) {
VM_virtual_device_info (cdev->private->devno,
&cdev->private->senseid);
if (cdev->private->senseid.cu_type != 0xFFFF) {
/* Got the device information from VM. */
ccw_device_sense_id_done(cdev, 0);
return;
}
}
/*
* If we can't couldn't identify the device type we
* consider the device "not operational".
*/
ccw_device_sense_id_done(cdev, -ENODEV);
break;
}
}
EXPORT_SYMBOL(diag210);