mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 23:53:55 +08:00
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
243 lines
9.8 KiB
C
243 lines
9.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* drivers/atm/suni.h - S/UNI PHY driver
|
|
*/
|
|
|
|
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
|
|
|
|
#ifndef DRIVER_ATM_SUNI_H
|
|
#define DRIVER_ATM_SUNI_H
|
|
|
|
#include <linux/atmdev.h>
|
|
#include <linux/atmioc.h>
|
|
#include <linux/sonet.h>
|
|
|
|
/* SUNI registers */
|
|
|
|
#define SUNI_MRI 0x00 /* Master Reset and Identity / Load
|
|
Meter */
|
|
#define SUNI_MC 0x01 /* Master Configuration */
|
|
#define SUNI_MIS 0x02 /* Master Interrupt Status */
|
|
/* no 0x03 */
|
|
#define SUNI_MCM 0x04 /* Master Clock Monitor */
|
|
#define SUNI_MCT 0x05 /* Master Control */
|
|
#define SUNI_CSCS 0x06 /* Clock Synthesis Control and Status */
|
|
#define SUNI_CRCS 0x07 /* Clock Recovery Control and Status */
|
|
/* 0x08-0x0F reserved */
|
|
#define SUNI_RSOP_CIE 0x10 /* RSOP Control/Interrupt Enable */
|
|
#define SUNI_RSOP_SIS 0x11 /* RSOP Status/Interrupt Status */
|
|
#define SUNI_RSOP_SBL 0x12 /* RSOP Section BIP-8 LSB */
|
|
#define SUNI_RSOP_SBM 0x13 /* RSOP Section BIP-8 MSB */
|
|
#define SUNI_TSOP_CTRL 0x14 /* TSOP Control */
|
|
#define SUNI_TSOP_DIAG 0x15 /* TSOP Diagnostic */
|
|
/* 0x16-0x17 reserved */
|
|
#define SUNI_RLOP_CS 0x18 /* RLOP Control/Status */
|
|
#define SUNI_RLOP_IES 0x19 /* RLOP Interrupt Enable/Status */
|
|
#define SUNI_RLOP_LBL 0x1A /* RLOP Line BIP-8/24 LSB */
|
|
#define SUNI_RLOP_LB 0x1B /* RLOP Line BIP-8/24 */
|
|
#define SUNI_RLOP_LBM 0x1C /* RLOP Line BIP-8/24 MSB */
|
|
#define SUNI_RLOP_LFL 0x1D /* RLOP Line FEBE LSB */
|
|
#define SUNI_RLOP_LF 0x1E /* RLOP Line FEBE */
|
|
#define SUNI_RLOP_LFM 0x1F /* RLOP Line FEBE MSB */
|
|
#define SUNI_TLOP_CTRL 0x20 /* TLOP Control */
|
|
#define SUNI_TLOP_DIAG 0x21 /* TLOP Diagnostic */
|
|
/* 0x22-0x27 reserved */
|
|
#define SUNI_SSTB_CTRL 0x28
|
|
#define SUNI_RPOP_SC 0x30 /* RPOP Status/Control */
|
|
#define SUNI_RPOP_IS 0x31 /* RPOP Interrupt Status */
|
|
/* 0x32 reserved */
|
|
#define SUNI_RPOP_IE 0x33 /* RPOP Interrupt Enable */
|
|
/* 0x34-0x36 reserved */
|
|
#define SUNI_RPOP_PSL 0x37 /* RPOP Path Signal Label */
|
|
#define SUNI_RPOP_PBL 0x38 /* RPOP Path BIP-8 LSB */
|
|
#define SUNI_RPOP_PBM 0x39 /* RPOP Path BIP-8 MSB */
|
|
#define SUNI_RPOP_PFL 0x3A /* RPOP Path FEBE LSB */
|
|
#define SUNI_RPOP_PFM 0x3B /* RPOP Path FEBE MSB */
|
|
/* 0x3C reserved */
|
|
#define SUNI_RPOP_PBC 0x3D /* RPOP Path BIP-8 Configuration */
|
|
#define SUNI_RPOP_RC 0x3D /* RPOP Ring Control (PM5355) */
|
|
/* 0x3E-0x3F reserved */
|
|
#define SUNI_TPOP_CD 0x40 /* TPOP Control/Diagnostic */
|
|
#define SUNI_TPOP_PC 0x41 /* TPOP Pointer Control */
|
|
/* 0x42-0x44 reserved */
|
|
#define SUNI_TPOP_APL 0x45 /* TPOP Arbitrary Pointer LSB */
|
|
#define SUNI_TPOP_APM 0x46 /* TPOP Arbitrary Pointer MSB */
|
|
/* 0x47 reserved */
|
|
#define SUNI_TPOP_PSL 0x48 /* TPOP Path Signal Label */
|
|
#define SUNI_TPOP_PS 0x49 /* TPOP Path Status */
|
|
/* 0x4A-0x4F reserved */
|
|
#define SUNI_RACP_CS 0x50 /* RACP Control/Status */
|
|
#define SUNI_RACP_IES 0x51 /* RACP Interrupt Enable/Status */
|
|
#define SUNI_RACP_MHP 0x52 /* RACP Match Header Pattern */
|
|
#define SUNI_RACP_MHM 0x53 /* RACP Match Header Mask */
|
|
#define SUNI_RACP_CHEC 0x54 /* RACP Correctable HCS Error Count */
|
|
#define SUNI_RACP_UHEC 0x55 /* RACP Uncorrectable HCS Err Count */
|
|
#define SUNI_RACP_RCCL 0x56 /* RACP Receive Cell Counter LSB */
|
|
#define SUNI_RACP_RCC 0x57 /* RACP Receive Cell Counter */
|
|
#define SUNI_RACP_RCCM 0x58 /* RACP Receive Cell Counter MSB */
|
|
#define SUNI_RACP_CFG 0x59 /* RACP Configuration */
|
|
/* 0x5A-0x5F reserved */
|
|
#define SUNI_TACP_CS 0x60 /* TACP Control/Status */
|
|
#define SUNI_TACP_IUCHP 0x61 /* TACP Idle/Unassigned Cell Hdr Pat */
|
|
#define SUNI_TACP_IUCPOP 0x62 /* TACP Idle/Unassigned Cell Payload
|
|
Octet Pattern */
|
|
#define SUNI_TACP_FIFO 0x63 /* TACP FIFO Configuration */
|
|
#define SUNI_TACP_TCCL 0x64 /* TACP Transmit Cell Counter LSB */
|
|
#define SUNI_TACP_TCC 0x65 /* TACP Transmit Cell Counter */
|
|
#define SUNI_TACP_TCCM 0x66 /* TACP Transmit Cell Counter MSB */
|
|
#define SUNI_TACP_CFG 0x67 /* TACP Configuration */
|
|
#define SUNI_SPTB_CTRL 0x68 /* SPTB Control */
|
|
/* 0x69-0x7F reserved */
|
|
#define SUNI_MT 0x80 /* Master Test */
|
|
/* 0x81-0xFF reserved */
|
|
|
|
/* SUNI register values */
|
|
|
|
|
|
/* MRI is reg 0 */
|
|
#define SUNI_MRI_ID 0x0f /* R, SUNI revision number */
|
|
#define SUNI_MRI_ID_SHIFT 0
|
|
#define SUNI_MRI_TYPE 0x70 /* R, SUNI type (lite is 011) */
|
|
#define SUNI_MRI_TYPE_SHIFT 4
|
|
#define SUNI_MRI_TYPE_PM5346 0x3 /* S/UNI 155 LITE */
|
|
#define SUNI_MRI_TYPE_PM5347 0x4 /* S/UNI 155 PLUS */
|
|
#define SUNI_MRI_TYPE_PM5350 0x7 /* S/UNI 155 ULTRA */
|
|
#define SUNI_MRI_TYPE_PM5355 0x1 /* S/UNI 622 */
|
|
#define SUNI_MRI_RESET 0x80 /* RW, reset & power down chip
|
|
0: normal operation
|
|
1: reset & low power */
|
|
|
|
/* MCM is reg 0x4 */
|
|
#define SUNI_MCM_LLE 0x20 /* line loopback (PM5355) */
|
|
#define SUNI_MCM_DLE 0x10 /* diagnostic loopback (PM5355) */
|
|
|
|
/* MCT is reg 5 */
|
|
#define SUNI_MCT_LOOPT 0x01 /* RW, timing source, 0: from
|
|
TRCLK+/- */
|
|
#define SUNI_MCT_DLE 0x02 /* RW, diagnostic loopback */
|
|
#define SUNI_MCT_LLE 0x04 /* RW, line loopback */
|
|
#define SUNI_MCT_FIXPTR 0x20 /* RW, disable transmit payload pointer
|
|
adjustments
|
|
0: payload ptr controlled by TPOP
|
|
ptr control reg
|
|
1: payload pointer fixed at 522 */
|
|
#define SUNI_MCT_LCDV 0x40 /* R, loss of cell delineation */
|
|
#define SUNI_MCT_LCDE 0x80 /* RW, loss of cell delineation
|
|
interrupt (1: on) */
|
|
/* RSOP_CIE is reg 0x10 */
|
|
#define SUNI_RSOP_CIE_OOFE 0x01 /* RW, enable interrupt on frame alarm
|
|
state change */
|
|
#define SUNI_RSOP_CIE_LOFE 0x02 /* RW, enable interrupt on loss of
|
|
frame state change */
|
|
#define SUNI_RSOP_CIE_LOSE 0x04 /* RW, enable interrupt on loss of
|
|
signal state change */
|
|
#define SUNI_RSOP_CIE_BIPEE 0x08 /* RW, enable interrupt on section
|
|
BIP-8 error (B1) */
|
|
#define SUNI_RSOP_CIE_FOOF 0x20 /* W, force RSOP out of frame at next
|
|
boundary */
|
|
#define SUNI_RSOP_CIE_DDS 0x40 /* RW, disable scrambling */
|
|
|
|
/* RSOP_SIS is reg 0x11 */
|
|
#define SUNI_RSOP_SIS_OOFV 0x01 /* R, out of frame */
|
|
#define SUNI_RSOP_SIS_LOFV 0x02 /* R, loss of frame */
|
|
#define SUNI_RSOP_SIS_LOSV 0x04 /* R, loss of signal */
|
|
#define SUNI_RSOP_SIS_OOFI 0x08 /* R, out of frame interrupt */
|
|
#define SUNI_RSOP_SIS_LOFI 0x10 /* R, loss of frame interrupt */
|
|
#define SUNI_RSOP_SIS_LOSI 0x20 /* R, loss of signal interrupt */
|
|
#define SUNI_RSOP_SIS_BIPEI 0x40 /* R, section BIP-8 interrupt */
|
|
|
|
/* TSOP_CTRL is reg 0x14 */
|
|
#define SUNI_TSOP_CTRL_LAIS 0x01 /* insert alarm indication signal */
|
|
#define SUNI_TSOP_CTRL_DS 0x40 /* disable scrambling */
|
|
|
|
/* TSOP_DIAG is reg 0x15 */
|
|
#define SUNI_TSOP_DIAG_DFP 0x01 /* insert single bit error cont. */
|
|
#define SUNI_TSOP_DIAG_DBIP8 0x02 /* insert section BIP err (cont) */
|
|
#define SUNI_TSOP_DIAG_DLOS 0x04 /* set line to zero (loss of signal) */
|
|
|
|
/* TLOP_DIAG is reg 0x21 */
|
|
#define SUNI_TLOP_DIAG_DBIP 0x01 /* insert line BIP err (continuously) */
|
|
|
|
/* SSTB_CTRL is reg 0x28 */
|
|
#define SUNI_SSTB_CTRL_LEN16 0x01 /* path trace message length bit */
|
|
|
|
/* RPOP_RC is reg 0x3D (PM5355) */
|
|
#define SUNI_RPOP_RC_ENSS 0x40 /* enable size bit */
|
|
|
|
/* TPOP_DIAG is reg 0x40 */
|
|
#define SUNI_TPOP_DIAG_PAIS 0x01 /* insert STS path alarm ind (cont) */
|
|
#define SUNI_TPOP_DIAG_DB3 0x02 /* insert path BIP err (continuously) */
|
|
|
|
/* TPOP_APM is reg 0x46 */
|
|
#define SUNI_TPOP_APM_APTR 0x03 /* RW, arbitrary pointer, upper 2
|
|
bits */
|
|
#define SUNI_TPOP_APM_APTR_SHIFT 0
|
|
#define SUNI_TPOP_APM_S 0x0c /* RW, "unused" bits of payload
|
|
pointer */
|
|
#define SUNI_TPOP_APM_S_SHIFT 2
|
|
#define SUNI_TPOP_APM_NDF 0xf0 /* RW, NDF bits */
|
|
#define SUNI_TPOP_APM_NDF_SHIFT 4
|
|
|
|
#define SUNI_TPOP_S_SONET 0 /* set S bits to 00 */
|
|
#define SUNI_TPOP_S_SDH 2 /* set S bits to 10 */
|
|
|
|
/* RACP_IES is reg 0x51 */
|
|
#define SUNI_RACP_IES_FOVRI 0x02 /* R, FIFO overrun */
|
|
#define SUNI_RACP_IES_UHCSI 0x04 /* R, uncorrectable HCS error */
|
|
#define SUNI_RACP_IES_CHCSI 0x08 /* R, correctable HCS error */
|
|
#define SUNI_RACP_IES_OOCDI 0x10 /* R, change of cell delineation
|
|
state */
|
|
#define SUNI_RACP_IES_FIFOE 0x20 /* RW, enable FIFO overrun interrupt */
|
|
#define SUNI_RACP_IES_HCSE 0x40 /* RW, enable HCS error interrupt */
|
|
#define SUNI_RACP_IES_OOCDE 0x80 /* RW, enable cell delineation state
|
|
change interrupt */
|
|
|
|
/* TACP_CS is reg 0x60 */
|
|
#define SUNI_TACP_CS_FIFORST 0x01 /* RW, reset transmit FIFO (sticky) */
|
|
#define SUNI_TACP_CS_DSCR 0x02 /* RW, disable payload scrambling */
|
|
#define SUNI_TACP_CS_HCAADD 0x04 /* RW, add coset polynomial to HCS */
|
|
#define SUNI_TACP_CS_DHCS 0x10 /* RW, insert HCS errors */
|
|
#define SUNI_TACP_CS_FOVRI 0x20 /* R, FIFO overrun */
|
|
#define SUNI_TACP_CS_TSOCI 0x40 /* R, TSOC input high */
|
|
#define SUNI_TACP_CS_FIFOE 0x80 /* RW, enable FIFO overrun interrupt */
|
|
|
|
/* TACP_IUCHP is reg 0x61 */
|
|
#define SUNI_TACP_IUCHP_CLP 0x01 /* RW, 8th bit of 4th octet of i/u
|
|
pattern */
|
|
#define SUNI_TACP_IUCHP_PTI 0x0e /* RW, 5th-7th bits of 4th octet of i/u
|
|
pattern */
|
|
#define SUNI_TACP_IUCHP_PTI_SHIFT 1
|
|
#define SUNI_TACP_IUCHP_GFC 0xf0 /* RW, 1st-4th bits of 1st octet of i/u
|
|
pattern */
|
|
#define SUNI_TACP_IUCHP_GFC_SHIFT 4
|
|
|
|
/* SPTB_CTRL is reg 0x68 */
|
|
#define SUNI_SPTB_CTRL_LEN16 0x01 /* path trace message length */
|
|
|
|
/* MT is reg 0x80 */
|
|
#define SUNI_MT_HIZIO 0x01 /* RW, all but data bus & MP interface
|
|
tri-state */
|
|
#define SUNI_MT_HIZDATA 0x02 /* W, also tri-state data bus */
|
|
#define SUNI_MT_IOTST 0x04 /* RW, enable test mode */
|
|
#define SUNI_MT_DBCTRL 0x08 /* W, control data bus by CSB pin */
|
|
#define SUNI_MT_PMCTST 0x10 /* W, PMC test mode */
|
|
#define SUNI_MT_DS27_53 0x80 /* RW, select between 8- or 16- bit */
|
|
|
|
|
|
#define SUNI_IDLE_PATTERN 0x6a /* idle pattern */
|
|
|
|
|
|
#ifdef __KERNEL__
|
|
struct suni_priv {
|
|
struct k_sonet_stats sonet_stats; /* link diagnostics */
|
|
int loop_mode; /* loopback mode */
|
|
int type; /* phy type */
|
|
struct atm_dev *dev; /* device back-pointer */
|
|
struct suni_priv *next; /* next SUNI */
|
|
};
|
|
|
|
int suni_init(struct atm_dev *dev);
|
|
#endif
|
|
|
|
#endif
|