2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 16:53:54 +08:00
linux-next/lib/decompress_inflate.c
Alexandre Courbot 1431574a1c lib/decompressors: fix "no limit" output buffer length
When decompressing into memory, the output buffer length is set to some
arbitrarily high value (0x7fffffff) to indicate the output is, virtually,
unlimited in size.

The problem with this is that some platforms have their physical memory at
high physical addresses (0x80000000 or more), and that the output buffer
address and its "unlimited" length cannot be added without overflowing.
An example of this can be found in inflate_fast():

/* next_out is the output buffer address */
out = strm->next_out - OFF;
/* avail_out is the output buffer size. end will overflow if the output
 * address is >= 0x80000104 */
end = out + (strm->avail_out - 257);

This has huge consequences on the performance of kernel decompression,
since the following exit condition of inflate_fast() will be always true:

} while (in < last && out < end);

Indeed, "end" has overflowed and is now always lower than "out".  As a
result, inflate_fast() will return after processing one single byte of
input data, and will thus need to be called an unreasonably high number of
times.  This probably went unnoticed because kernel decompression is fast
enough even with this issue.

Nonetheless, adjusting the output buffer length in such a way that the
above pointer arithmetic never overflows results in a kernel decompression
that is about 3 times faster on affected machines.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Jon Medhurst <tixy@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:38 -07:00

184 lines
3.7 KiB
C

#ifdef STATIC
/* Pre-boot environment: included */
/* prevent inclusion of _LINUX_KERNEL_H in pre-boot environment: lots
* errors about console_printk etc... on ARM */
#define _LINUX_KERNEL_H
#include "zlib_inflate/inftrees.c"
#include "zlib_inflate/inffast.c"
#include "zlib_inflate/inflate.c"
#else /* STATIC */
/* initramfs et al: linked */
#include <linux/zutil.h>
#include "zlib_inflate/inftrees.h"
#include "zlib_inflate/inffast.h"
#include "zlib_inflate/inflate.h"
#include "zlib_inflate/infutil.h"
#endif /* STATIC */
#include <linux/decompress/mm.h>
#define GZIP_IOBUF_SIZE (16*1024)
static int INIT nofill(void *buffer, unsigned int len)
{
return -1;
}
/* Included from initramfs et al code */
STATIC int INIT gunzip(unsigned char *buf, int len,
int(*fill)(void*, unsigned int),
int(*flush)(void*, unsigned int),
unsigned char *out_buf,
int *pos,
void(*error)(char *x)) {
u8 *zbuf;
struct z_stream_s *strm;
int rc;
size_t out_len;
rc = -1;
if (flush) {
out_len = 0x8000; /* 32 K */
out_buf = malloc(out_len);
} else {
out_len = ((size_t)~0) - (size_t)out_buf; /* no limit */
}
if (!out_buf) {
error("Out of memory while allocating output buffer");
goto gunzip_nomem1;
}
if (buf)
zbuf = buf;
else {
zbuf = malloc(GZIP_IOBUF_SIZE);
len = 0;
}
if (!zbuf) {
error("Out of memory while allocating input buffer");
goto gunzip_nomem2;
}
strm = malloc(sizeof(*strm));
if (strm == NULL) {
error("Out of memory while allocating z_stream");
goto gunzip_nomem3;
}
strm->workspace = malloc(flush ? zlib_inflate_workspacesize() :
sizeof(struct inflate_state));
if (strm->workspace == NULL) {
error("Out of memory while allocating workspace");
goto gunzip_nomem4;
}
if (!fill)
fill = nofill;
if (len == 0)
len = fill(zbuf, GZIP_IOBUF_SIZE);
/* verify the gzip header */
if (len < 10 ||
zbuf[0] != 0x1f || zbuf[1] != 0x8b || zbuf[2] != 0x08) {
if (pos)
*pos = 0;
error("Not a gzip file");
goto gunzip_5;
}
/* skip over gzip header (1f,8b,08... 10 bytes total +
* possible asciz filename)
*/
strm->next_in = zbuf + 10;
strm->avail_in = len - 10;
/* skip over asciz filename */
if (zbuf[3] & 0x8) {
do {
/*
* If the filename doesn't fit into the buffer,
* the file is very probably corrupt. Don't try
* to read more data.
*/
if (strm->avail_in == 0) {
error("header error");
goto gunzip_5;
}
--strm->avail_in;
} while (*strm->next_in++);
}
strm->next_out = out_buf;
strm->avail_out = out_len;
rc = zlib_inflateInit2(strm, -MAX_WBITS);
if (!flush) {
WS(strm)->inflate_state.wsize = 0;
WS(strm)->inflate_state.window = NULL;
}
while (rc == Z_OK) {
if (strm->avail_in == 0) {
/* TODO: handle case where both pos and fill are set */
len = fill(zbuf, GZIP_IOBUF_SIZE);
if (len < 0) {
rc = -1;
error("read error");
break;
}
strm->next_in = zbuf;
strm->avail_in = len;
}
rc = zlib_inflate(strm, 0);
/* Write any data generated */
if (flush && strm->next_out > out_buf) {
int l = strm->next_out - out_buf;
if (l != flush(out_buf, l)) {
rc = -1;
error("write error");
break;
}
strm->next_out = out_buf;
strm->avail_out = out_len;
}
/* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
if (rc == Z_STREAM_END) {
rc = 0;
break;
} else if (rc != Z_OK) {
error("uncompression error");
rc = -1;
}
}
zlib_inflateEnd(strm);
if (pos)
/* add + 8 to skip over trailer */
*pos = strm->next_in - zbuf+8;
gunzip_5:
free(strm->workspace);
gunzip_nomem4:
free(strm);
gunzip_nomem3:
if (!buf)
free(zbuf);
gunzip_nomem2:
if (flush)
free(out_buf);
gunzip_nomem1:
return rc; /* returns Z_OK (0) if successful */
}
#define decompress gunzip